Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Mechanical Behavior of HAVAR Foils Using the Small Punch Technique.

ABSTRACT: Prediction of the mechanical behavior of thin foils (~25 µm) requires special characterization techniques. The current work is focused on the mechanical and microstructural characterization of 25 µm HAVAR alloy foils following annealing, cold rolling, and subsequent heat treatments, using small punch testing (SPT), X-ray diffraction (XRD), and transmission-scanning electron microscopy (TEM). The SPT technique revealed that the annealed specimens exhibited the largest maximal load to failure and deformation (more than two-fold), compared to the cold rolled and heat treated conditions. The microscopy observations revealed high dislocation density following cold rolling and subsequent heat treatments. Following annealing, a cubic crystallographic structure (FCC) with equiaxed grains and a limited dislocation population was observed. Following cold rolling and subsequent thermal treatment, a preferred orientation texture (i.e., 'deformation texture') was observed with a very high dislocation density. The correlation between the mechanical behavior and the microstructural observations is discussed in detail.

SUBMITTER: Haroush S

PROVIDER: S-EPMC5459004 | biostudies-other | 2017 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Small-scale mechanical behavior of a eutectic high entropy alloy.

Project description:Eutectic high entropy alloys, with lamellar arrangement of solid solution phases, represent a new paradigm for simultaneously achieving high strength and ductility, thereby circumventing this well-known trade-off in conventional alloys. However, dynamic strengthening mechanisms and phase-boundary interactions during external loading remain unclear for these eutectic systems. In this study, small-scale mechanical behavior was evaluated for AlCoCrFeNi2.1 eutectic high entropy alloy, consisting of a lamellar arrangement of L12 and B2 solid-solution phases. The ultimate tensile strength was 1165 MPa with ductility of ~18% and ultimate compressive strength was 1863 MPa with a total compressive fracture strain of ~34%. Dual mode fracture was observed with ductile failure for L12 phase and brittle mode for B2 phase. Phase-specific mechanical tests using nano-indentation and micro-pillar compression showed higher hardness and strength and larger strain rate sensitivity for B2 compared with L12. Micro-pillars on B2 phase deformed by plastic barreling while L12 micro-pillars showed high density of slip steps due to activation of more slip systems and homogenous plastic flow. Mixed micro-pillars containing both the phases exhibited dual yielding behavior while the interface between L12 and B2 was well preserved without any sign of separation or cracking. Phase-specific friction analysis revealed higher coefficient of friction for B2 compared to L12. These results will pave the way for fundamental understanding of phase-specific contribution to bulk mechanical response of concentrated alloys and help in designing structural materials with high fracture toughness.

| S-EPMC7021732 | biostudies-literature

Rectovaginal fistula repair using a disposable biopsy punch.

Project description:To describe a novel surgical technique for complete excision of a rectovaginal fistula tract using a disposable biopsy punch during a transvaginal rectovaginal fistula repair and to present our initial surgical experience.Description of 4 cases of simple rectovaginal fistulas and an innovative surgical technique for the complete excision of the fistula tract using a disposable biopsy punch.Successful 3-, 9-, and 12-month follow-up of 4 cases with simple rectovaginal fistulas after transvaginal rectovaginal fistula repair using a novel approach for complete fistula tract excision with a disposable biopsy punch and layered nonoverlapping suture closure. Demographic information reported included age, parity, medical and surgical history, as well as fistula characteristics including size, location, presenting symptoms, and duration of symptoms. We describe our operative technique with picture description.This novel approach using a disposable punch biopsy device to complete excision of simple rectovaginal fistula tracts during a transvaginal rectovaginal fistula repair can help with achieving a successful surgical outcome.

| S-EPMC3872741 | biostudies-literature

In-office Bone-Anchored Hearing Implants via Minimally Invasive Punch Technique in a Veteran Population.

Project description:ObjectiveDescribe the feasibility and safety of completing bone-anchored hearing implants via the minimally invasive punch technique in the in-office setting.Study designThis single-institution case series included 20 patients who underwent in-office bone-anchored hearing implant placement under local anesthesia from 2018 to 2021.SettingVeterans Affairs Northern California Healthcare System.MethodsFollowing completion of the case series, patients were retrospectively surveyed regarding their satisfaction with this approach via a modified SSQ-8 (Surgical Satisfaction Questionnaire) to fit our purposes.ResultsA total of 23 implants were completed in the in-office setting on 20 patients. Intra- and postoperative complication rates, including skin changes, irritation, infection, and poor wound healing, were similar to or better than currently published complication rates in the literature. In addition, patients reported overwhelmingly positive responses on the SSQ-8, almost universally stating that they were "very satisfied" with their clinic experience.ConclusionThis case series suggests that it is feasible and safe to complete this procedure in the clinic under local anesthesia, but further prospective studies are needed to evaluate this in a more generalized population.

| S-EPMC9720705 | biostudies-literature

Experimental and Computational Study of Ductile Fracture in Small Punch Tests.

Project description:A unified experimental-computational study on ductile fracture initiation and propagation during small punch testing is presented. Tests are carried out at room temperature with unnotched disks of different thicknesses where large-scale yielding prevails. In thinner specimens, the fracture occurs with severe necking under membrane tension, whereas for thicker ones a through thickness shearing mode prevails changing the crack orientation relative to the loading direction. Computational studies involve finite element simulations using a shear modified Gurson-Tvergaard-Needleman porous plasticity model with an integral-type nonlocal formulation. The predicted punch load-displacement curves and deformed profiles are in good agreement with the experimental results.

| S-EPMC5666991 | biostudies-literature

Surface Modification Using MAPLE Technique for Improving the Mechanical Performance of Adhesive Joints.

Project description:The adhesive bonds that ensure the appropriate mechanical properties for metal joining imply the surface chemical and wetting modification characteristics of the substrates. In this work, matrix-assisted pulsed laser evaporation (MAPLE) was used for the surface modification of Al via the deposition of two chemical compounds, polyvinyl alcohol (PVA) and triethanolamine (TEA), from frozen aqueous solutions. The deposition of the TEA and PVA layers was evidenced by FT-IR, SEM, and AFM analysis. The contact angle measurements evidenced the change in the hydrophilicity of the surface and surface free energies. The performance of the commercial silyl-based polymer adhesive Bison Max Repair Extreme Adhesive® was evaluated by tensile strength measurements. This method led to a change in tensile strength of 54.22% in the case of Al-TEA and 36.34% for Al-PVA compared with the control. This study gives preliminary insights into using MAPLE, for the first time in adhesive applications, as a pretreatment method for Al plates for adhesive bonding reinforcement.

| S-EPMC10054649 | biostudies-literature

Modified Coronary Pharmaco-Mechanical Thrombectomy Technique.

Project description: Not available

| S-EPMC11307672 | biostudies-literature

Mechanical Properties and In Vitro Degradation of Sputtered Biodegradable Fe-Au Foils.

Project description:Iron-based materials proved being a viable candidate material for biodegradable implants. Magnetron sputtering combined with UV-lithography offers the possibility to fabricate structured, freestanding foils of iron-based alloys and even composites with non-solvable elements. In order to accelerate the degradation speed and enhance the mechanical properties, the technique was used to fabricate Fe-Au multilayer foils. The foils were annealed after the deposition to form a homogeneous microstructure with fine Au precipitates. The characterization of the mechanical properties was done by uniaxial tensile tests. The degradation behavior was analyzed by electrochemical tests and immersion tests under in vitro conditions. Due to the noble Au precipitates it was possible to achieve high tensile strengths between 550 and 800 MPa depending on the Au content and heat treatment. Furthermore, the Fe-Au foils showed a significantly accelerated corrosion compared to pure iron samples. The high mechanical strength is close to the properties of SS316L steel. In combination with the accelerated degradation rate, sputtered Fe-Au foils showed promising properties for use as iron-based, biodegradable implants.

| S-EPMC5457263 | biostudies-other

Mechanical Characterization on Solvent Treated Cellulose Nanofiber Preforms Using Solution Dipping-Hot Press Technique.

Project description:Nanocomposites films were prepared by impregnating the solvent treated cellulose nanofiber (SCNF) preforms with epoxy resin using a solution dipping-hot press technique. We investigated the effect of SCNF preforms porosity on the amount of impregnated resin and tensile properties of the corresponding nanocomposites films. The porosity of the CNF preforms was successfully controlled using the solvent exchange with varying CNF concentration. The impregnated resin amount increased as the SCNF preforms porosity increased, respectively. Resulting nanocomposite films showed higher mechanical properties than that of the SCNF preforms. The best mechanical properties of composites were found with the combination of 1 wt % SCNF preform and low viscosity epoxy, exhibiting tensile strength and Young's modulus of 77 MPa and 4.8 GPa, respectively. The composite also showed high fiber volume fraction of more than 60%.

| S-EPMC7712792 | biostudies-literature

Punch Trackers: Correct Recognition Depends on Punch Type and Training Experience.

Project description:To determine the ability of different punch trackers (PT) (Corner (CPT), Everlast (EPT), and Hykso (HPT)) to recognize specific punch types (lead and rear straight punches, lead and rear hooks, and lead and rear uppercuts) thrown by trained (TR, n = 10) and untrained punchers (UNTR, n = 11), subjects performed different punch combinations, and PT data were compared to data from video recordings to determine how well each PT recognized the punches that were actually thrown. Descriptive statistics and multilevel modelling were used to analyze the data. The CPT, EPT and HPT detected punches more accurately in TR than UNTR, evidenced by a lower percentage error in TR (p = 0.007). The CPT, EPT, and HPT detected straight punches better than uppercuts and hooks, with a lower percentage error for straight punches (p < 0.001). The recognition of punches with CPT and HPT depended on punch order, with earlier punches in a sequence recognized better. The same may or may not have occurred with EPT, but EPT does not allow for data to be exported, meaning the order of individual punches could not be analyzed. The CPT and HPT both seem to be viable options for tracking punch count and punch type in TR and UNTR.

| S-EPMC8123076 | biostudies-literature

Regenerative Drug Discovery Using Ear Pinna Punch Wound Model in Mice.

Project description:The ear pinna is a complex tissue consisting of the dermis, cartilage, muscles, vessels, and nerves. Ear pinna healing is a model of regeneration in mammals. In some mammals, including rabbits, punch wounds in the ear pinna close spontaneously; in common-use laboratory mice, they remain for life. Agents inducing ear pinna healing are potential regenerative drugs. We tested the effects of selected bioactive agents on 2 mm ear pinna wound closure in BALB/c mice. Our previous research demonstrated that a DNA methyltransferase inhibitor, zebularine, remarkably induced ear pinna regeneration. Although experiments with two other demethylating agents, RG108 and hydralazine, were unsuccessful, a histone deacetylase inhibitor, valproic acid, was another epigenetic agent found to increase ear hole closure. In addition, we identified a pro-regenerative activity of 4-ketoretinoic acid, a retinoic acid metabolite. Attempts to counteract the regenerative effects of the demethylating agent zebularine, with folates as methyl donors, failed. Surprisingly, a high dose of methionine, another methyl donor, promoted ear hole closure. Moreover, we showed that the regenerated areas of ear pinna were supplied with nerve fibre networks and blood vessels. The ear punch model proved helpful in testing the pro-regenerative activities of small-molecule compounds and observations of peripheral nerve regeneration.

| S-EPMC9145447 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data