Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Crystallographic Characterization on Polycrystalline Ni-Mn-Ga Alloys with Strong Preferred Orientation.

ABSTRACT: Heusler type Ni-Mn-Ga ferromagnetic shape memory alloys can demonstrate excellent magnetic shape memory effect in single crystals. However, such effect in polycrystalline alloys is greatly weakened due to the random distribution of crystallographic orientation. Microstructure optimization and texture control are of great significance and challenge to improve the functional behaviors of polycrystalline alloys. In this paper, we summarize our recent progress on the microstructure control in polycrystalline Ni-Mn-Ga alloys in the form of bulk alloys, melt-spun ribbons and thin films, based on the detailed crystallographic characterizations through neutron diffraction, X-ray diffraction and electron backscatter diffraction. The presented results are expected to offer some guidelines for the microstructure modification and functional performance control of ferromagnetic shape memory alloys.

SUBMITTER: Li Z

PROVIDER: S-EPMC5459090 | biostudies-other | 2017 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

New Heusler compounds in Ni-Mn-In and Ni-Mn-Sn alloys.

Project description:Rapidly quenched ternary Ni-Mn-T (T?=?In, Sn) alloys exhibit features associated with magnetic skyrmions, so that XRD, TEM, EDS, SAED and HREM investigations were carried out for structural characterization on the two alloy systems. In this paper, we report a new type of Mn-rich Heusler compound with a cubic unit cell, a?=?0.9150?nm in Ni-Mn-In and a?=?0.9051?nm in Ni-Mn-Sn, which coexist with a Ni-rich full-Heusler compound with defects, a?=?0.6094?nm in Ni-Mn-In and a?=?0.6034?nm in Ni-Mn-Sn. A further analysis of the experimental results reveals a close structural relationship between these two compounds.

| S-EPMC6533245 | biostudies-literature

Tunable Magnetocaloric Effect in Ni-Mn-Ga Microwires.

Project description:Magnetic refrigeration is of great interest due to its high energy efficiency, environmental friendliness and low cost. However, undesired hysteresis losses, concentrated working temperature interval (WTI) and poor mechanical stability are vital drawbacks that hinder its practical application. Off-stoichiometric Ni-Mn-Ga Heusler alloys are capable of giant magnetocaloric effect (MCE) and tunable transformation temperatures. Here, by creating Ni-Mn-Ga microwires with diameter of 35-80 ?m using a melt-extraction technique, negligible hysteresis and relatively good mechanical stability are found due to the high specific surface area (SSA) that reduces incompatibility between neighboring grains. The high SSA also favors the element evaporation at high temperatures so that the transformation temperatures can be feasibly adjusted. Tunable magnetocaloric effect owing to different magneto-structural coupling states is realized by (i) composition design and subsequent tuning, which adjusts the temperature difference between the martensite transformation (MT) and the magnetic transition, and (ii) creation of gradient composition distribution state, which manipulates the MT range. Magnetic entropy change ?Sm ~-18.5?J?kg-1 K-1 with relatively concentrated WTI and WTI up to ~60?K with net refrigeration capacity ~240?J?kg-1 at 50?kOe are demonstrated in the present Ni-Mn-Ga microwires. This criterion is also applicable for other small-sized materials.

| S-EPMC6224590 | biostudies-literature

Low temperature a/b nanotwins in Ni50Mn25+xGa25-x Heusler alloys.

Project description:We have found low temperature a/b nanotwins having (110) twinning plane in a five-layered modulated martensite phase of Ni50Mn25+xGa25-x (at. %) Heusler alloys and identified the particular region in phase diagram where the nanotwinning occurs. Evolution of the structure with decreasing temperature was studied by X-ray diffraction using single crystals exhibiting magnetic shape memory effect. The merging of (400) and (040) lines upon cooling for 2.6?<?x?<?3.5 indicated a/b nanotwinning originating from the refinement of initially coarse a/b twins. Refinement of the twins with decreasing temperature was observed directly using scanning electron microscopy. The prerequisite for nanotwinning is an extremely low twin boundary energy, which we estimated using first-principles calculations to be 0.16?meV/Å2. As the nanotwinning distorts the relation between the crystal lattice and the X-ray diffraction pattern, it should be taken into consideration in structural studies of Ni-Mn-Ga Heusler alloys.

| S-EPMC6085376 | biostudies-literature

Understanding strong magnetostriction in Fe(100-x)Ga(x) alloys.

Project description:Magnetostriction of ferromagnetic materials describes the change of their shape or dimension in response to the reorientation of magnetization under the influence of external magnetic field. Fe(100-x)Ga(x) binary alloys (Galfenol) have large magnetostriction and excellent ductility; and they are very promising rare-earth free materials for applications in sensors, actuators, energy-harvesters and spintronic devices. Here we report results of large-scale ab initio molecular dynamics (AIMD) simulations for Galfenol, especially regarding the mechanism that leads to the sudden drop of tetragonal magnetostriction at x ~ 19, a long-standing puzzle for the community. Based on rigid band analysis, we propose possible ways to further optimize the performance of Galfenol for device applications. For example, we found that the substitution of a small amount of Cu for Ga (1.6%) in certain configuration may double the magnetostriction of Galfenol.

| S-EPMC3865486 | biostudies-literature

Preferred crystallographic orientation of cellulose in plant primary cell walls.

Project description:Cellulose, the most abundant biopolymer on earth, is a versatile, energy rich material found in the cell walls of plants, bacteria, algae, and tunicates. It is well established that cellulose is crystalline, although the orientational order of cellulose crystallites normal to the plane of the cell wall has not been characterized. A preferred orientational alignment of cellulose crystals could be an important determinant of the mechanical properties of the cell wall and of cellulose-cellulose and cellulose-matrix interactions. Here, the crystalline structures of cellulose in primary cell walls of onion (Allium cepa), the model eudicot Arabidopsis (Arabidopsis thaliana), and moss (Physcomitrella patens) were examined through grazing incidence wide angle X-ray scattering (GIWAXS). We find that GIWAXS can decouple diffraction from cellulose and epicuticular wax crystals in cell walls. Pole figures constructed from a combination of GIWAXS and X-ray rocking scans reveal that cellulose crystals have a preferred crystallographic orientation with the (200) and (110)/([Formula: see text]) planes preferentially stacked parallel to the cell wall. This orientational ordering of cellulose crystals, termed texturing in materials science, represents a previously unreported measure of cellulose organization and contradicts the predominant hypothesis of twisting of microfibrils in plant primary cell walls.

| S-EPMC7501228 | biostudies-literature

Dataset on enhanced magnetic refrigeration capacity in Ni-Mn-Ga micro-particles.

Project description:The dataset presented in this paper is supporting the research article "Enhanced magnetic refrigeration capacity in Ni-Mn-Ga micro-particles" (Qian, et al., 2018) [1]. The martensite transformation temperature (Ms ) and the Curie point (Tc ) of the annealed alloys with nominal composition Ni55-xMn20+xGa25 (x = 0, 0.25, 0.5, 1, atomic percent, labeled as A1, A2, A3 and A4, respectively) varied with x, yielding a temperature difference Tc -Mc of 7.2 K at x = 0.5 (A3). The magnetization difference (ΔM) between the austenite and martensite, the field dependence of transformation temperature (ΔT/ΔH) and the thermal hysteresis loss of A3 and the according stress relief annealing (SRA) particles were demonstrated. The isothermal magnetization curves of A3 and the SRA particles were measured in order to determine the magnetocaloric effect.

| S-EPMC5997913 | biostudies-literature

Enhanced magnetocaloric effect in Ni-Mn-Sn-Co alloys with two successive magnetostructural transformations.

Project description:High magnetocaloric refrigeration performance requires large magnetic entropy change ?S M and broad working temperature span ?T FWHM . A fourth element doping of Co in ternary Ni-Mn-Sn alloy may significantly enhance the saturation magnetization of the alloy and thus enhance the ?S M . Here, the effects of Co-doping on the martensite transformation, magnetic properties and magnetocaloric effects (MCE) of quaternary Ni47-xMn43Sn10Cox (x?=?0, 6, 11) alloys were investigated. The martensite transformation temperatures decrease while austenite Curie point increases with Co content increasing to x?=?6 and 11, thus broadening the temperature window for a high magnetization austenite (13.5, 91.7 and 109.1?A·m2/kg for x?=?0, 6 and 11, respectively). Two successive magnetostructural transformations (A???10?M and A???10?M?+?6?M) occur in the alloy x?=?6, which are responsible for the giant magnetic entropy change ?S M?=? 29.5?J/kg·K, wide working temperature span ?T FWHM ?=?14?K and large effective refrigeration capacity RC eff ?=?232?J/kg under a magnetic field of 5.0?T. These results suggest that Ni40.6Mn43.3Sn10.0Co6.1 alloy may act as a potential solid-state magnetic refrigerant working at room temperature.

| S-EPMC5974186 | biostudies-literature

Magnetic field-induced rubber-like behavior in Ni-Mn-Ga particles/polymer composite.

Project description:Single crystalline Ni-Mn-Ga is well known as a prototype ferromagnetic shape memory alloy (FSMA) exhibiting a giant magnetic field-induced strain (MFIS), up to 12%, due to the magnetically driven twin boundary rearrangement. The large stroke and fast magnetomechanical response make it important for actuators and sensors. Polycrystalline Ni-Mn-Ga is inexpensive and technologically easy accessible, but constrains from the grain boundaries inhibit the twin boundary motion, whereby a very low MFIS is observed. Here, we have shown for the first time that a polycrystalline Ni-Mn-Ga can be split into the magnetostrain-active single grains which, being specially assembled in a silicone polymer matrix, caused large and fully reversible MFIS of the resulting composite. We termed the unique reversibility of a large MFIS of the composite as the magnetic field-induced rubber-like behavior. The magnetostrain of individual particles was explored by the X-ray μCT 3D imaging. The results suggest novel solutions for development of the low cost magnetic actuators and sensors for haptic applications.

| S-EPMC6401090 | biostudies-other

Correlation between crystallographic anisotropy and dendritic orientation selection of binary magnesium alloys.

Project description:Both synchrotron X-ray tomography and EBSD characterization revealed that the preferred growth directions of magnesium alloy dendrite change as the type and amount of solute elements. Such growth behavior was further investigated by evaluating the orientation-dependent surface energy and the subsequent crystallographic anisotropy via ab-initio calculations based on density functional theory and hcp lattice structure. It was found that for most binary magnesium alloys, the preferred growth direction of the ?-Mg dendrite in the basal plane is always [Formula: see text], and independent on either the type or concentration of the additional elements. In non-basal planes, however, the preferred growth direction is highly dependent on the solute concentration. In particular, for Mg-Al alloys, this direction changes from [Formula: see text] to [Formula: see text] as the Al-concentration increased, and for Mg-Zn alloys, this direction changes from [Formula: see text] to [Formula: see text] or [Formula: see text] as the Zn-content varied. Our results provide a better understanding on the dendritic orientation selection and morphology transition of magnesium alloys at the atomic level.

| S-EPMC5648834 | biostudies-other

Reversible tuning of magnetocaloric Ni-Mn-Ga-Co films on ferroelectric PMN-PT substrates.

Project description:Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here, we present results of epitaxial magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg1/3Nb2/3)0.72Ti0.28O3 (PMN-PT) substrates. Utilizing X-ray diffraction measurements, we demonstrate that the strain induced in the substrate by application of an electric field can be transferred to the thin film, resulting in a change of the lattice parameters. We examined the consequences of this strain on the magnetic properties of the thin film by temperature- and electric field-dependent measurements. We did not observe a change of martensitic transformation temperature but a reversible change of magnetisation within the austenitic state, which we attribute to the intrinsic magnetic instability of this metamagnetic Heusler alloy. We demonstrate an electric field-controlled entropy change of about 31?% of the magnetocaloric effect - without any hysteresis.

| S-EPMC5663903 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data