Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Model Stirrer Based on a Multi-Material Turntable for Microwave Processing Materials.

ABSTRACT: Microwaves have been widely used in the treatment of materials, such as heating, drying, and sterilization. However, the heating in the commonly used microwave applicators is usually uneven. In this paper, a novel multi-material turntable structure is creatively proposed to improve the temperature uniformity in microwave ovens. Three customized turntables consisting of polyethylene (PE) and alumina, PE and aluminum, and alumina and aluminum are, respectively, utilized in a domestic microwave oven in simulation. During the heating process, the processed material is placed on a fixed Teflon bracket which covers the constantly rotating turntable. Experiments are conducted to measure the surface and point temperatures using an infrared thermal imaging camera and optical fibers. Simulated results are compared qualitatively with the measured ones, which verifies the simulated models. Compared with the turntables consisting of a single material, a 26%-47% increase in temperature uniformity from adapting the multi-material turntable can be observed for the microwave-processed materials.

SUBMITTER: Ye J

PROVIDER: S-EPMC5459096 | biostudies-other | 2017 Jan

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Multi-material digital light processing bioprinting of hydrogel-based microfluidic chips.

Project description:Recent advancements in digital-light-processing (DLP)-based bioprinting and hydrogel engineering have enabled novel developments in organs-on-chips. In this work, we designed and developed a multi-material, DLP-based bioprinter for rapid, one-step prototyping of hydrogel-based microfluidic chips. A composite hydrogel bioink based on poly-ethylene-glycol-diacrylate (PEGDA) and gelatin methacryloyl (GelMA) was optimized through varying the bioprinting parameters such as light exposure time, bioink composition, and layer thickness. We showed a wide range of mechanical properties of the microfluidic chips for various ratios of PEGDA:GelMA. Microfluidic features of hydrogel-based chips were then tested using dynamic flow experiments. Human-derived tumor cells were encapsulated in 3D bioprinted structures to demonstrate their bioactivity and cell-friendly environment. Cell seeding experiments then validated the efficacy of the selected bioinks for vascularized micro-tissues. Our biofabrication approach offers a useful tool for the rapid integration of micro-tissue models into organs-on-chips and high-throughput drug screening platforms.

| S-EPMC10700126 | biostudies-literature

The microwave adsorption behavior and microwave-assisted heteroatoms doping of graphene-based nano-carbon materials.

Project description:Microwave-assisted heating method is used to treat graphite oxide (GO), pyrolytic graphene oxide (PGO) and hydrogen-reduced pyrolytic graphene oxide (HPGO). Pure or doped graphene are prepared in the time of minutes and a thermal deoxygenization reduction mechanism is proposed to understand their microwave adsorption behaviors. These carbon materials are excellent catalysts in the reduction of nitrobenzene. The defects are believed to play an important role in the catalytic performance.

| S-EPMC4127501 | biostudies-literature

Coupled Anisotropic Magneto-Mechanical Material Model for Structured Magnetoactive Materials.

Project description:Adaptability of properties of magnetic materials such as magnetorheological (MR) fluids, MR elastomers (MRE), and other magneto-active (MA) materials drives scientific activities worldwide, trying to broaden the fields of application of such materials. In our work, we focused on the utilization and implementation of existing material models to realize a praxis-oriented coupled anisotropic material model for the commercial finite element (FE) software ABAQUS taking into account magneto-mechanical interactions. By introducing this material model, a first step is done to predict and optimize the behavior of MA materials.

| S-EPMC7696180 | biostudies-literature

A Phase-Shifting Method for Improving the Heating Uniformity of Microwave Processing Materials.

Project description:Microwave processing of materials has been found to deliver enormous advantages over conventional processing methods in terms of mechanical and physical properties of the materials. However, the non-uniform temperature distribution is the key problem of microwave processing, which is related to the structure of the cavity, and the placement and physical parameters of the material. In this paper, a new microwave cavity structure with a sliding short based on phase-shifting heating is creatively proposed to improve the temperature uniformity. An electronic mathematical model based on the Finite Element Method (FEM) is built to predict the temperature distribution. Meanwhile, a new computational approach based on the theory of transformation optics is first provided to solve the problem of the moving boundary in the model simulation. At first, the experiment is carried out to validate the model, and heating results from the experiment show good agreement with the model's prediction. Based on the verified model, materials selected among a wide range of dielectric constants are treated by stationary heating and phase-shifting heating. The coefficient of variation (COV) of the temperature and temperature difference has been compared in detail between stationary heating and phase-shifting heating. A significant improvement in heating uniformity can be seen from the temperature distribution for most of the materials. Furthermore, three other materials are also treated at high temperature and the heating uniformity is also improved. Briefly, the strategy of phase-shifting heating plays a significant role in solve the problem of non-uniform heating in microwave-based material processing. A 25%-58% increase in uniformity from adapting the phase-shifting method can be observed for the microwave-processed materials.

| S-EPMC5503069 | biostudies-other

Equivalent Electromagnetic Constants for Microwave Application to Composite Materials for the Multi-Scale Problem.

Project description:To connect different scale models in the multi-scale problem of microwave use, equivalent material constants were researched numerically by a three-dimensional electromagnetic field, taking into account eddy current and displacement current. A volume averaged method and a standing wave method were used to introduce the equivalent material constants; water particles and aluminum particles are used as composite materials. Consumed electrical power is used for the evaluation. Water particles have the same equivalent material constants for both methods; the same electrical power is obtained for both the precise model (micro-model) and the homogeneous model (macro-model). However, aluminum particles have dissimilar equivalent material constants for both methods; different electric power is obtained for both models. The varying electromagnetic phenomena are derived from the expression of eddy current. For small electrical conductivity such as water, the macro-current which flows in the macro-model and the micro-current which flows in the micro-model express the same electromagnetic phenomena. However, for large electrical conductivity such as aluminum, the macro-current and micro-current express different electromagnetic phenomena. The eddy current which is observed in the micro-model is not expressed by the macro-model. Therefore, the equivalent material constant derived from the volume averaged method and the standing wave method is applicable to water with a small electrical conductivity, although not applicable to aluminum with a large electrical conductivity.

| S-EPMC5452798 | biostudies-other

In Situ Monitoring of Microwave Processing of Materials at High Temperatures through Dielectric Properties Measurement.

Project description:Microwave-assisted processes have recognized advantages over more conventional heating techniques. However, the effects on the materials' microstructure are still a matter of study, due to the complexity of the interaction between microwaves and matter, especially at high temperatures. Recently developed advanced microwave instrumentation allows the study of high temperature microwave heating processes in a way that was not possible before. In this paper, different materials and thermal processes induced by microwaves have been studied through the in situ characterization of their dielectric properties with temperature. This knowledge is crucial in several aspects: to analyze the effects of the microwave field on the reaction pathways; to design and optimize microwave-assisted processes, and to predict the behavior of materials leading to repeatable and reliable heating processes, etc.

| S-EPMC5503012 | biostudies-other

Microfluidic microwave biosensor based on biomimetic materials for the quantitative detection of glucose.

Project description:This paper presents a microwave microfluidic biosensor for monitoring blood glucose levels. The glucose sensor is a triple ring microstrip patch antenna integrated with a biomimetic microfluidic device capable of measuring a fixed volume of glucose solution. The sensor was utilized to detect 50-500 mg/dL glucose solutions. The interaction of the glucose solution with the electromagnetic field on the patch's surface influences both the resonance frequency and the magnitude of reflection coefficient. The results indicate that the microfluidic device can reduce experimental error and enhance the correlation between glucose concentration, resonant frequency, and reflection coefficient. Finally, the microfluidic sensor had a sensitivity of 0.25 MHz/(mg/dL), a detection limit as low as 7.7 mg/dL, and correlation coefficients of resonance frequency and reflection coefficient with a glucose concentration of 0.996 and 0.984, respectively. The experiment on the sensor's stability verifies the sensor's excellent stability and rapid response (~ 150 ms). Consequently, the device can be used to differentiate the concentration of glucose solutions, as well as to detect blood glucose levels at an early stage.

| S-EPMC9509396 | biostudies-literature

Polymeric Materials Reinforced with Multiwall Carbon Nanotubes: A Constitutive Material Model.

Project description:In this paper we have modified an existing material model introduced by Cantournet and co-workers to take into account softening and residual strain effects observed in polymeric materials reinforced with carbon nanotubes when subjected to loading and unloading cycles. In order to assess the accuracy of the modified material model, we have compared theoretical predictions with uniaxial extension experimental data obtained from reinforced polymeric material samples. It is shown that the proposed model follows experimental data well as its maximum errors attained are lower than 2.67%, 3.66%, 7.11% and 6.20% for brominated isobutylene and paramethylstyrene copolymer reinforced with multiwall carbon nanotubes (BIMSM-MWCNT), reinforced natural rubber (NR-MWCNT), polybutadiene-carbon black (PB-CB), and PC/ABS reinforced with single-wall carbon nanotubes (SWCNT), respectively.

| S-EPMC5521287 | biostudies-other

Spin-Crossover Materials towards Microwave Radiation Switches.

Project description:Microwave electromagnetic radiation that ranges from one meter to one millimetre wavelengths is finding numerous applications for wireless communication, navigation and detection, which makes materials able to tune microwave radiation getting widespread interest. Here we offer a new way to tune GHz frequency radiation by using spin-crossover complexes that are known to change their various physical properties under the influence of diverse external stimuli. As a result of electronic re-configuration process, microwave absorption properties differ for high spin and low spin forms of the complex. The evolution of a microwave absorption spectrum for the switchable compound within the region of thermal transition indicates that the high-spin and the low-spin forms are characterized by a different attenuation of electromagnetic waves. Absorption and reflection coefficients were found to be higher in the high-spin state comparing to the low-spin state. These results reveal a considerable potential for the implementation of spin-crossover materials into different elements of microwave signal switching and wireless communication.

| S-EPMC5133552 | biostudies-literature

Processing of collagen based biomaterials and the resulting materials properties.

Project description:Collagen, the most abundant extracellular matrix protein in animal kingdom belongs to a family of fibrous proteins, which transfer load in tissues and which provide a highly biocompatible environment for cells. This high biocompatibility makes collagen a perfect biomaterial for implantable medical products and scaffolds for in vitro testing systems. To manufacture collagen based solutions, porous sponges, membranes and threads for surgical and dental purposes or cell culture matrices, collagen rich tissues as skin and tendon of mammals are intensively processed by physical and chemical means. Other tissues such as pericardium and intestine are more gently decellularized while maintaining their complex collagenous architectures. Tissue processing technologies are organized as a series of steps, which are combined in different ways to manufacture structurally versatile materials with varying properties in strength, stability against temperature and enzymatic degradation and cellular response. Complex structures are achieved by combined technologies. Different drying techniques are performed with sterilisation steps and the preparation of porous structures simultaneously. Chemical crosslinking is combined with casting steps as spinning, moulding or additive manufacturing techniques. Important progress is expected by using collagen based bio-inks, which can be formed into 3D structures and combined with live cells. This review will give an overview of the technological principles of processing collagen rich tissues down to collagen hydrolysates and the methods to rebuild differently shaped products. The effects of the processing steps on the final materials properties are discussed especially with regard to the thermal and the physical properties and the susceptibility to enzymatic degradation. These properties are key features for biological and clinical application, handling and metabolization.

| S-EPMC6423854 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data