Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High Energy Storage Density and Impedance Response of PLZT2/95/5 Antiferroelectric Ceramics.

ABSTRACT: (Pb0.97La0.02)(Zr0.95Ti0.05)O₃ (PLZT2/95/5) ceramics were successfully prepared via a solid-state reaction route. The dielectric properties were investigated in the temperature region of 26-650 °C. The dielectric diffuse anomaly in the dielectric relaxation was found in the high temperature region of 600-650 °C with increasing the measuring frequency, which was related to the dynamic thermal process of ionized oxygen vacancies generated in the high temperature. Two phase transition points were detected during heating, which were found to coexist from 150 to 200 °C. Electric field induced ferroelectric to antiferroelectric phase transition behavior of the (Pb0.97La0.02)(Zr0.95Ti0.05)O₃ ceramics was investigated in this work with an emphasis on energy storage properties. A recoverable energy-storage density of 0.83 J/cm³ and efficiency of 70% was obtained in (Pb0.97La0.02)(Zr0.95Ti0.05)O₃ ceramics at 55 kV/cm. Based on these results, (Pb0.97La0.02)(Zr0.95Ti0.05)O₃ ceramics with a large recoverable energy-storage density could be a potential candidate for the applications in high energy-storage density ceramic capacitors.

SUBMITTER: Li B

PROVIDER: S-EPMC5459216 | biostudies-other | 2017 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High energy storage density over a broad temperature range in sodium bismuth titanate-based lead-free ceramics.

Project description:A series of (1-x)Bi0.48La0.02Na0.48Li0.02Ti0.98Zr0.02O3-xNa0.73Bi0.09NbO3 ((1-x)LLBNTZ-xNBN) (x?=?0-0.14) ceramics were designed and fabricated using the conventional solid-state sintering method. The phase structure, microstructure, dielectric, ferroelectric and energy storage properties of the ceramics were systematically investigated. The results indicate that the addition of Na0.73Bi0.09NbO3 (NBN) could decrease the remnant polarization (P r ) and improve the temperature stability of dielectric constant obviously. The working temperature range satisfying TCC 150?°C??±15% of this work spans over 400?°C with the compositions of x???0.06. The maximum energy storage density can be obtained for the sample with x?=?0.10 at room temperature, with an energy storage density of 2.04?J/cm3 at 178?kV/cm. In addition, the (1-x)LLBNTZ-xNBN ceramics exhibit excellent energy storage properties over a wide temperature range from room temperature to 90?°C. The values of energy storage density and energy storage efficiency is 0.91?J/cm3 and 79.51%, respectively, for the 0.90LLBNTZ-0.10NBN ceramic at the condition of 100?kV/cm and 90?°C. It can be concluded that the (1-x)LLBNTZ-xNBN ceramics are promising lead-free candidate materials for energy storage devices over a broad temperature range.

| S-EPMC5562768 | biostudies-literature

Anti-Ferroelectric Ceramics for High Energy Density Capacitors.

Project description:With an ever increasing dependence on electrical energy for powering modern equipment and electronics, research is focused on the development of efficient methods for the generation, storage and distribution of electrical power. In this regard, the development of suitable dielectric based solid-state capacitors will play a key role in revolutionizing modern day electronic and electrical devices. Among the popular dielectric materials, anti-ferroelectrics (AFE) display evidence of being a strong contender for future ceramic capacitors. AFE materials possess low dielectric loss, low coercive field, low remnant polarization, high energy density, high material efficiency, and fast discharge rates; all of these characteristics makes AFE materials a lucrative research direction. However, despite the evident advantages, there have only been limited attempts to develop this area. This article attempts to provide a focus to this area by presenting a timely review on the topic, on the relevant scientific advancements that have been made with respect to utilization and development of anti-ferroelectric materials for electric energy storage applications. The article begins with a general introduction discussing the need for high energy density capacitors, the present solutions being used to address this problem, and a brief discussion of various advantages of anti-ferroelectric materials for high energy storage applications. This is followed by a general description of anti-ferroelectricity and important anti-ferroelectric materials. The remainder of the paper is divided into two subsections, the first of which presents various physical routes for enhancing the energy storage density while the latter section describes chemical routes for enhanced storage density. This is followed by conclusions and future prospects and challenges which need to be addressed in this particular field.

| S-EPMC5458845 | biostudies-other

High density mechanical energy storage with carbon nanothread bundle.

Project description:The excellent mechanical properties of carbon nanofibers bring promise for energy-related applications. Through in silico studies and continuum elasticity theory, here we show that the ultra-thin carbon nanothreads-based bundles exhibit a high mechanical energy storage density. Specifically, the gravimetric energy density is found to decrease with the number of filaments, with torsion and tension as the two dominant contributors. Due to the coupled stresses, the nanothread bundle experiences fracture before reaching the elastic limit of any individual deformation mode. Our results show that nanothread bundles have similar mechanical energy storage capacity compared to (10,10) carbon nanotube bundles, but possess their own advantages. For instance, the structure of the nanothread allows us to realize the full mechanical energy storage potential of its bundle structure through pure tension, with a gravimetric energy density of up to 1.76 MJ kg-1, which makes them appealing alternative building blocks for energy storage devices.

| S-EPMC7171126 | biostudies-literature

Optimizing high-temperature energy storage in tungsten bronze-structured ceramics via high-entropy strategy and bandgap engineering.

Project description:As a vital material utilized in energy storage capacitors, dielectric ceramics have widespread applications in high-power pulse devices. However, the development of dielectric ceramics with both high energy density and efficiency at high temperatures poses a significant challenge. In this study, we employ high-entropy strategy and band gap engineering to enhance the energy storage performance in tetragonal tungsten bronze-structured dielectric ceramics. The high-entropy strategy fosters cation disorder and disrupts long-range ordering, consequently regulating relaxation behavior. Simultaneously, the reduction in grain size, elevation of conductivity activation energy, and increase in band gap collectively bolster the breakdown electric strength. This cascade effect results in outstanding energy storage performance, ultimately achieving a recoverable energy density of 8.9 J cm-3 and an efficiency of 93% in Ba0.4Sr0.3Ca0.3Nb1.7Ta0.3O6 ceramics, which also exhibit superior temperature stability across a broad temperature range up to 180 °C and excellent cycling reliability up to 105. This research presents an effective method for designing tetragonal tungsten bronze dielectric ceramics with ultra-high comprehensive energy storage performance.

| S-EPMC11245601 | biostudies-literature

Long-term heat-storage ceramics absorbing thermal energy from hot water.

Project description:In thermal and nuclear power plants, 70% of the generated thermal energy is lost as waste heat. The temperature of the waste heat is below the boiling temperature of water. Here, we show a long-term heat-storage material that absorbs heat energy at warm temperatures from 38°C (311 K) to 67°C (340 K). This unique series of material is composed of scandium-substituted lambda-trititanium-pentoxide (λ-Sc x Ti3-x O5). λ-Sc x Ti3-x O5 not only accumulates heat energy from hot water but also could release the accumulated heat energy by the application of pressure. λ-Sc x Ti3-x O5 has the potential to accumulate heat energy of hot water generated in thermal and nuclear power plants and to recycle the accumulated heat energy on demand by applying external pressure. Furthermore, it may be used to recycle waste heat in industrial factories and automobiles.

| S-EPMC7329333 | biostudies-literature

Boosting Energy Storage Performance of Glass Ceramics via Modulating Defect Formation During Crystallization.

Project description:Along with the demand for further miniaturization of high and pulsed power devices, it becomes more and more important to realize ultrahigh recoverable energy storage density (Wrec ) with high energy storage efficiency (η) and ultrahigh discharge energy storage density (Wd ) accompanied by high power density (Pd ) in dielectrics. To date, it remains, however, a big challenge to achieve high Wrec or Wd in glass ceramics compared to other dielectric energy storage materials. Herein, a strategy of defect formation modulation is applied to form "amorphous-disordered-ordered" microstructure in BaTiO3 -based glass ceramics so as to achieve a high Wrec of 12.04 J cm-3 with a high η of 81.1% and an ultrahigh Wd of 11.98 J cm-3 with a superb Pd of 973 MW cm-3 . This work demonstrates a feasible route to obtain glass ceramics with an outstanding energy storage performance and proves the enormous potential of glass ceramics in high and pulsed power applications.

| S-EPMC10953718 | biostudies-literature

A Bilayer High-Temperature Dielectric Film with Superior Breakdown Strength and Energy Storage Density.

Project description:The further electrification of various fields in production and daily life makes it a topic worthy of exploration to improve the performance of capacitors for a long time, including thin-film capacitors. The discharge energy density of thin-film capacitors that serves as one of the important types directly depends on electric field strength and the dielectric constant of the insulation material. However, it has long been a great challenge to improve the breakdown strength and dielectric constant simultaneously. Considering that boron nitride nanosheets (BNNS) possess superior insulation and thermal conductivity owing to wide band gap and 2-dimensional structure, a bilayer polymer film is prepared via coating BNNS by solution casting on surface of polyethylene terephthalate (PET) films. By revealing the bandgap and insulating behavior with UV absorption spectrum, leakage current, and finite element calculation, it is manifested that nanocoating contributes to enhance the bandgap of polymer films, thereby suppressing the charge injection by redirecting their transport from electrodes. Worthy to note that an ultrahigh breakdown field strength (~ 736 MV m-1), an excellent discharge energy density (~ 8.77 J cm-3) and a prominent charge-discharge efficiency (~ 96.51%) are achieved concurrently, which is ascribed to the contribution of BNNS ultrathin layer. In addition, the modified PET films also have superior comprehensive performance at high temperatures (~ 120 °C). The materials and methods here selected are easily accessible and facile, which are suitable for large-scale roll-to-roll process production, and are of certain significance to explore the methods about film modification suitable for commercial promotion.

| S-EPMC10250289 | biostudies-literature

Rescaling of metal oxide nanocrystals for energy storage having high capacitance and energy density with robust cycle life.

Project description:Nanocrystals are promising structures, but they are too large for achieving maximum energy storage performance. We show that rescaling 3-nm particles through lithiation followed by delithiation leads to high-performance energy storage by realizing high capacitance close to the theoretical capacitance available via ion-to-atom redox reactions. Reactive force-field (ReaxFF) molecular dynamics simulations support the conclusion that Li atoms react with nickel oxide nanocrystals (NiO-n) to form lithiated core-shell structures (Ni:Li2O), whereas subsequent delithiation causes Ni:Li2O to form atomic clusters of NiO-a. This is consistent with in situ X-ray photoelectron and optical spectroscopy results showing that Ni(2+) of the nanocrystal changes during lithiation-delithiation through Ni(0) and back to Ni(2+). These processes are also demonstrated to provide a generic route to rescale another metal oxide. Furthermore, assembling NiO-a into the positive electrode of an asymmetric device enables extraction of full capacitance for a counter negative electrode, giving high energy density in addition to robust capacitance retention over 100,000 cycles.

| S-EPMC4491738 | biostudies-literature

Giant energy-storage density with ultrahigh efficiency in lead-free relaxors via high-entropy design.

Project description:Next-generation advanced high/pulsed power capacitors rely heavily on dielectric ceramics with high energy storage performance. However, thus far, the huge challenge of realizing ultrahigh recoverable energy storage density (Wrec) accompanied by ultrahigh efficiency (η) still existed and has become a key bottleneck restricting the development of dielectric materials in cutting-edge energy storage applications. Here, we propose a high-entropy strategy to design "local polymorphic distortion" including rhombohedral-orthorhombic-tetragonal-cubic multiphase nanoclusters and random oxygen octahedral tilt, resulting in ultrasmall polar nanoregions, an enhanced breakdown electric field, and delayed polarization saturation. A giant Wrec ~10.06 J cm-3 is realized in lead-free relaxor ferroelectrics, especially with an ultrahigh η ~90.8%, showing breakthrough progress in the comprehensive energy storage performance for lead-free bulk ceramics. This work opens up an effective avenue to design dielectric materials with ultrahigh comprehensive energy storage performance to meet the demanding requirements of advanced energy storage applications.

| S-EPMC9163056 | biostudies-literature

High-energy-density dual-ion battery for stationary storage of electricity using concentrated potassium fluorosulfonylimide.

Project description:Graphite dual-ion batteries represent a potential battery concept for large-scale stationary storage of electricity, especially when constructed free of lithium and other chemical elements with limited natural reserves. Owing to their non-rocking-chair operation mechanism, however, the practical deployment of graphite dual-ion batteries is inherently limited by the need for large quantities of electrolyte solutions as reservoirs of all ions that are needed for complete charge and discharge of the electrodes. Thus far, lithium-free graphite dual-ion batteries have employed moderately concentrated electrolyte solutions (0.3-1 M), resulting in rather low cell-level energy densities of 20-70 Wh kg-1. In this work, we present a lithium-free graphite dual-ion battery utilizing a highly concentrated electrolyte solution of 5 M potassium bis(fluorosulfonyl)imide in alkyl carbonates. The resultant battery offers an energy density of 207 Wh kg-1, along with a high energy efficiency of 89% and an average discharge voltage of 4.7 V.

| S-EPMC6203722 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data