Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data set for fabrication of conformal two-dimensional TiO2 by atomic layer deposition using tetrakis (dimethylamino) titanium (TDMAT) and H2O precursors.

ABSTRACT: The data and complementary information presented hare are related to the research article of "http://dx.doi.org/10.1016/j.matdes.2017.02.016; Materials and Design 120 (2017) 99-108" [1]. The article provides data and information on the case of atomic layer deposition (ALD) of ultra-thin two-dimensional TiO2 film. The chemical structure of precursors, and the fabrication process were illustrated. The data of spectral ellipsometric measurements and the methods of calculations were presented. Data of root mean square roughness and the average roughness of the ADL TiO2 film are presented. The method of bandgap measurements and the bandgap calculation are also explained in the present data article.

SUBMITTER: Zhuiykov S

PROVIDER: S-EPMC5480828 | biostudies-other | 2017 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Data set for fabrication of conformal two-dimensional TiO2 by atomic layer deposition using tetrakis (dimethylamino) titanium (TDMAT) and H2O precursors.

Zhuiykov Serge S Akbari Mohammad Karbalaei MK Hai Zhenyin Z Xue Chenyang C Xu Hongyan H Hyde Lachlan L

Data in brief 20170609

The data and complementary information presented hare are related to the research article of "http://dx.doi.org/10.1016/j.matdes.2017.02.016; Materials and Design 120 (2017) 99-108" [1]. The article provides data and information on the case of atomic layer deposition (ALD) of ultra-thin two-dimensional TiO2 film. The chemical structure of precursors, and the fabrication process were illustrated. The data of spectral ellipsometric measurements and the methods of calculations were prese ...[more]

PMID: 28664177

Similar Datasets

Dataset for TiN Thin Films Prepared by Plasma-Enhanced Atomic Layer Deposition Using Tetrakis(dimethylamino)titanium (TDMAT) and Titanium Tetrachloride (TiCl4) Precursor.

Project description:A dataset in this report is regarding an article "Ultrathin Effective TiN Protective Films Prepared by Plasma-Enhanced Atomic Layer Deposition for High Performance Metallic Bipolar Plates of Polymer Electrolyte Membrane Fuel Cells" [1]. TiN (Titanium Nitride) thin films were deposited by Plasma-Enhanced Atomic Layer Deposition (PEALD) method using well known two types of precursor: using tetrakis(dimethylamino)titanium (TDMAT) and titanium tetrachloride (TiCl4), and plasma. Summarized reports, growth characteristics (growth rate as a function of each precursor pulse time, plasma power, precursor and plasma purge time, thickness depending on the number of PEALD cycles), each precursor structural information and the atomic force micrographs (AFM) data are herein demonstrated. For TDMAT-TiN, N2 plasma was used as a reactant whereas, H2+N2 plasma was used as TiCl4-TiN reactant. To apply the bipolar plate substrate, two types of TiN thin films were introduced into Stainless steel (SUS) 316L.

| S-EPMC7287241 | biostudies-literature

A Comparative Study on the Ferroelectric Performances in Atomic Layer Deposited Hf0.5Zr0.5O2 Thin Films Using Tetrakis(ethylmethylamino) and Tetrakis(dimethylamino) Precursors.

Project description:The chemical, physical, and electrical properties of the atomic layer deposited Hf0.5Zr0.5O2 thin films using tetrakis(ethylmethylamino) (TEMA) and tetrakis(dimethylamino) (TDMA) precursors are compared. The ligand of the metal-organic precursors strongly affects the residual C concentration, grain size, and the resulting ferroelectric properties. Depositing Hf0.5Zr0.5O2 films with the TDMA precursors results in lower C concentration and slightly larger grain size. These findings are beneficial to grow more ferroelectric-phase-dominant film, which mitigates its wake-up effect. From the wake-up test of the TDMA-Hf0.5Zr0.5O2 film with a 2.8 MV/cm cycling field, the adverse wake-up effect was well suppressed up to 105 cycles, with a reasonably high double remanent polarization value of ~40??C/cm2. The film also showed reliable switching up to 109 cycles with the 2.5 MV/cm cycling field without involving the wake-up effect but with the typical fatigue behavior.

| S-EPMC7138889 | biostudies-literature

Photocatalytic and Gas Sensitive Multiwalled Carbon Nanotube/TiO2-ZnO and ZnO-TiO2 Composites Prepared by Atomic Layer Deposition.

Project description:TiO2 and ZnO single and multilayers were deposited on hydroxyl functionalized multi-walled carbon nanotubes using atomic layer deposition. The bare carbon nanotubes and the resulting heterostructures were characterized by TG/DTA, Raman, XRD, SEM-EDX, XPS, TEM-EELS-SAED and low temperature nitrogen adsorption techniques, and their photocatalytic and gas sensing activities were also studied. The carbon nanotubes (CNTs) were uniformly covered with anatase TiO2 and wurtzite ZnO layers and with their combinations. In the photocatalytic degradation of methyl orange, the most beneficial structures are those where ZnO is the external layer, both in the case of single and double oxide layer covered CNTs (CNT-ZnO and CNT-TiO2-ZnO). The samples with multilayer oxides (CNT-ZnO-TiO2 and CNT-TiO2-ZnO) have lower catalytic activity due to their larger average densities, and consequently lower surface areas, compared to single oxide layer coated CNTs (CNT-ZnO and CNT-TiO2). In contrast, in gas sensing it is advantageous to have TiO2 as the outer layer. Since ZnO has higher conductivity, its gas sensing signals are lower when reacting with NH3 gas. The double oxide layer samples have higher resistivity, and hence a larger gas sensing response than their single oxide layer counterparts.

| S-EPMC7075193 | biostudies-literature

Nanometer-thick conformal pore sealing of self-assembled mesoporous silica by plasma-assisted atomic layer deposition.

Project description:On a porous substrate, regular atomic layer deposition (ALD) not only takes place on top of the substrate but also penetrates into the internal porosity. Here we report a plasma-assisted process in which the ALD precursors are chosen to be nonreactive unless triggered by plasma, so that ALD can be spatially defined by the supply of plasma irradiation. Since plasma cannot penetrate within the internal porosity, ALD has been successfully confined to the immediate surface. This not only gives a possible solution for sealing of porous low dielectric constant films with a conformal layer of nm-scale thickness but also enables us to progressively reduce the pore size of mesoporous materials in a sub-A/cycle fashion for membrane formation.

| S-EPMC2707262 | biostudies-literature

Tantalum-Doped TiO2 Prepared by Atomic Layer Deposition and Its Application in Perovskite Solar Cells.

Project description:Tantalum (Ta)-doped titanium oxide (TiO2) thin films are grown by plasma enhanced atomic layer deposition (PEALD), and used as both an electron transport layer and hole blocking compact layer of perovskite solar cells. The metal precursors of tantalum ethoxide and titanium isopropoxide are simultaneously injected into the deposition chamber. The Ta content is controlled by the temperature of the metal precursors. The experimental results show that the Ta incorporation introduces oxygen vacancies defects, accompanied by the reduced crystallinity and optical band gap. The PEALD Ta-doped films show a resistivity three orders of magnitude lower than undoped TiO2, even at a low Ta content (0.8-0.95 at.%). The ultraviolet photoelectron spectroscopy spectra reveal that Ta incorporation leads to a down shift of valance band and conduction positions, and this is helpful for the applications involving band alignment engineering. Finally, the perovskite solar cell with Ta-doped TiO2 electron transport layer demonstrates significantly improved fill factor and conversion efficiency as compared to that with the undoped TiO2 layer.

| S-EPMC8226548 | biostudies-literature

Atomic Layer Deposition of Titanium Oxide on Single-Layer Graphene: An Atomic-Scale Study toward Understanding Nucleation and Growth.

Project description:Controlled synthesis of a hybrid nanomaterial based on titanium oxide and single-layer graphene (SLG) using atomic layer deposition (ALD) is reported here. The morphology and crystallinity of the oxide layer on SLG can be tuned mainly with the deposition temperature, achieving either a uniform amorphous layer at 60 °C or ∼2 nm individual nanocrystals on the SLG at 200 °C after only 20 ALD cycles. A continuous and uniform amorphous layer formed on the SLG after 180 cycles at 60 °C can be converted to a polycrystalline layer containing domains of anatase TiO2 after a postdeposition annealing at 400 °C under vacuum. Using aberration-corrected transmission electron microscopy (AC-TEM), characterization of the structure and chemistry was performed on an atomic scale and provided insight into understanding the nucleation and growth. AC-TEM imaging and electron energy loss spectroscopy revealed that rocksalt TiO nanocrystals were occasionally formed at the early stage of nucleation after only 20 ALD cycles. Understanding and controlling nucleation and growth of the hybrid nanomaterial are crucial to achieving novel properties and enhanced performance for a wide range of applications that exploit the synergetic functionalities of the ensemble.

| S-EPMC5364723 | biostudies-literature

Atomic Layer Deposition of Mixed-Layered Aurivillius Phase on TiO2 Nanotubes: Synthesis, Characterization and Photoelectrocatalytic Properties.

Project description:For the first time, one-dimensional phase-modulated structures consisting of two different layered Aurivillius phases with alternating five and six perovskite-like layers were obtained by atomic layer deposition (ALD) on the surface of TiO2 nanotubes (Nt). It was shown that the use of vertically oriented TiO2 Nt as the substrate and the ALD technology of a two-layer Bi2O3-FeOx sandwich-structure make it possible to obtain a layered structure due to self-organization during annealing. A detailed study by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the coating is conformal. Raman spectroscopic analysis indicated the structure of the layered Aurivillius phases. Transient photocurrent responses under Ultraviolet-Visible (UV-Vis) light irradiation show that the ALD coating benefits the efficiency of photon excitation of electrons. The results of the photoelectrocatalytic experiments (PEC) with methyl orange degradation as a model demonstrate the significant potential of the synthesized structure as a photocatalyst. Photoluminescent measurement showed a decrease in the probability of recombination of photogenerated electron-hole pairs for ALD-coated TiO2 Nt, which demonstrates the high potential of these structures for use in photocatalytic and photoelectrochemical applications.

| S-EPMC7693954 | biostudies-literature

Low-Temperature Phase-Controlled Synthesis of Titanium Di- and Tri-sulfide by Atomic Layer Deposition.

Project description:Phase-controlled synthesis of two-dimensional (2D) transition-metal chalcogenides (TMCs) at low temperatures with a precise thickness control has to date been rarely reported. Here, we report on a process for the phase-controlled synthesis of TiS2 (metallic) and TiS3 (semiconducting) nanolayers by atomic layer deposition (ALD) with precise thickness control. The phase control has been obtained by carefully tuning the deposition temperature and coreactant composition during ALD. In all cases, characteristic self-limiting ALD growth behavior with a growth per cycle (GPC) of ∼0.16 nm per cycle was observed. TiS2 was prepared at 100 °C using H2S gas as coreactant and was also observed using H2S plasma as a coreactant at growth temperatures between 150 and 200 °C. TiS3 was synthesized only at 100 °C using H2S plasma as the coreactant. The S2 species in the H2S plasma, as observed by optical emission spectroscopy, has been speculated to lead to the formation of the TiS3 phase at low temperatures. The control between the synthesis of TiS2 and TiS3 was elucidated by Raman spectroscopy, X-ray photoelectron spectroscopy, high-resolution electron microscopy, and Rutherford backscattering study. Electrical transport measurements showed the low resistive nature of ALD grown 2D-TiS2 (1T-phase). Postdeposition annealing of the TiS3 layers at 400 °C in a sulfur-rich atmosphere improved the crystallinity of the film and yielded photoluminescence at ∼0.9 eV, indicating the semiconducting (direct band gap) nature of TiS3. The current study opens up a new ALD-based synthesis route for controlled, scalable growth of transition-metal di- and tri-chalcogenides at low temperatures.

| S-EPMC6883357 | biostudies-literature

MoS2 /MXene Aerogel with Conformal Heterogeneous Interfaces Tailored by Atomic Layer Deposition for Tunable Microwave Absorption.

Project description:In the design of electromagnetic (EM) wave absorbing materials, it is still a great challenge to optimize the relationship between the attenuation capability and impedance matching synergistically. Herein, a 3D porous MoS2 /MXene hybrid aerogel architecture with conformal heterogeneous interface has been built by atomic layer deposition (ALD) based on specific porous templates to optimize the microwave absorption (MA) performance comprehensively. The original porous structure of pristine Ti3 C2 Tx aerogel used as templates can be preserved well during ALD fabrication, which prolongs the reflection and scattering path and ameliorates the dielectric loss. Meanwhile, plenty of heterointerfaces between MoS2 and Ti3 C2 Tx have been fabricated based on conformally ALD-deposited MoS2 with controlled thickness on the porous surfaces of the templates, which can effectively optimize the impedance matching and transform its response to EM waves from shielding into absorbing. Moreover, the interaction between the attenuation capability and impedance matching can also be modulated by the number of ALD cycle in MoS2 fabrication. After optimization, MoS2 /MXene hybrid aerogel obtained under 300 ALD cycles shows a minimum reflection loss of -61.65 dB at the thickness of 4.53 mm. In addition, its preferable lightweight, high surface area, mechanical, and hydrophobicity properties will also be conducive to further practical applications.

| S-EPMC8895119 | biostudies-literature

Novel Antimicrobial Titanium Dioxide Nanotubes Obtained through a Combination of Atomic Layer Deposition and Electrospinning Technologies.

Project description:The search for new antimicrobial substances has increased in recent years. Antimicrobial nanostructures are one of the most promising alternatives. In this work, titanium dioxide nanotubes were obtained by an atomic layer deposition (ALD) process over electrospun polyvinyl alcohol nanofibers (PVN) at different temperatures with the purpose of obtaining antimicrobial nanostructures with a high specific area. Electrospinning and ALD parameters were studied in order to obtain PVN with smallest diameter and highest deposition rate, respectively. Chamber temperature was a key factor during ALD process and an appropriate titanium dioxide deposition performance was achieved at 200 °C. Subsequently, thermal and morphological analysis by SEM and TEM microscopies revealed hollow nanotubes were obtained after calcination process at 600 °C. This temperature allowed complete polymer removal and influenced the resulting anatase crystallographic structure of titanium dioxide that positively affected their antimicrobial activities. X-ray analysis confirmed the change of titanium dioxide crystallographic structure from amorphous phase of deposited PVN to anatase crystalline structure of nanotubes. These new nanostructures with very large surface areas resulted in interesting antimicrobial properties against Gram-positive and Gram-negative bacteria. Titanium dioxide nanotubes presented the highest activity against Escherichia coli with 5 log cycles reduction at 200 μg/mL concentration.

| S-EPMC5853759 | biostudies-literature