Porous Molecular Solids and Liquids.
Ontology highlight
ABSTRACT:
SUBMITTER: Cooper AI
PROVIDER: S-EPMC5492258 | biostudies-other | 2017 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We describe and demonstrate a novel apparatus for magnetic resonance imaging (MRI), suitable for imaging of both liquid and solid samples with micron-scale isotropic resolution. The apparatus includes a solenoidal radio-frequency microcoil with 170 ?m inner diameter and a set of planar gradient coils, all wound by hand and supported on a series of stacked sapphire plates. The design ensures efficient heat dissipation during gradient pulses and also facilitates disassembly, sample changes, and reassembly. To demonstrate liquid state (1)H MRI, we present an image of polystyrene beads within CuSO4-doped water, contained within a capillary tube with 100 ?m inner diameter, with 5.0 ?m isotropic resolution. To demonstrate solid state (1)H MRI, we present an image of NH4Cl particles within the capillary tube, with 8.0 ?m isotropic resolution. High-resolution solid state MRI is enabled by frequency-switched Lee-Goldburg decoupling, with an effective rotating frame field amplitude of 289 kHz. At room temperature, pulsed gradients of 4 T/m (i.e., 170 Hz/?m for (1)H MRI) are achievable in all three directions with currents of 10 A or less. The apparatus is contained within a variable-temperature liquid helium cryostat, which will allow future efforts to obtain MRI images at low temperatures with signal enhancement by dynamic nuclear polarization.
| S-EPMC4628880 | biostudies-literature
Project description:Proton conduction is a fundamental process in biology and in devices such as proton exchange membrane fuel cells. To maximize proton conduction, three-dimensional conduction pathways are preferred over one-dimensional pathways, which prevent conduction in two dimensions. Many crystalline porous solids to date show one-dimensional proton conduction. Here we report porous molecular cages with proton conductivities (up to 10(-3)?S?cm(-1) at high relative humidity) that compete with extended metal-organic frameworks. The structure of the organic cage imposes a conduction pathway that is necessarily three-dimensional. The cage molecules also promote proton transfer by confining the water molecules while being sufficiently flexible to allow hydrogen bond reorganization. The proton conduction is explained at the molecular level through a combination of proton conductivity measurements, crystallography, molecular simulations and quasi-elastic neutron scattering. These results provide a starting point for high-temperature, anhydrous proton conductors through inclusion of guests other than water in the cage pores.
| S-EPMC5027280 | biostudies-literature
Project description:Porous brittle solids have the ability to collapse and fail even under compressive stresses. In fracture mechanics, this singular behavior, often referred to as anticrack, demands for appropriate continuum models to predict the catastrophic failure. To identify universal controls of anticracks, we link the microstructure of a porous solid with its yield surface at the onset of plastic flow. We utilize an assembly method for porous structures, which allows to independently vary microstructural properties (density and coordination number) and perform discrete element simulations under mixed-mode (shear-compression) loading. In rescaled stress coordinates, the concurrent influence of the microstructural properties can be cast into a universal, ellipsoidal form of the yield surface that reveals an associative plastic flow rule, as a common feature of these materials. Our results constitute a constructive approach for continuum modeling of anticrack nucleation and propagation in highly porous brittle, engineering and geo-materials.
| S-EPMC7381610 | biostudies-literature
Project description:Pressure decline caused by the extraction of oil from deep sedimentary layers depends on the pore modulus Kpp, a poroelastic parameter that characterizes the effect of pressure change on pore volume under constant mean stress. Measurement of Kpp is difficult, however, as it requires calibration to account for fluid compressibility and compliance of the testing system. Nevertheless, knowing the easily measurable drained pore modulus Kp and adopting an assumption on the unjacketed pore modulus Ks?, it is possible to determine Kpp because these pore moduli are related. Previous work on indirectly estimating Ks? claimed that Ks? is strongly dependent on Terzaghi effective pressure P? and therefore not a constant; also, Ks? might be different from Ks, the solid bulk modulus of the major mineral constituent. We overcome the limitations of the indirect approach by directly measuring Ks?. The experiments reveal that Ks? is indeed a constant and that for an ideal porous rock, the assumption of
| S-EPMC6283901 | biostudies-literature
Project description:Gel layers bound to a rigid substrate are used in cell culture to control differentiation and migration and to lower the friction and tailor the wetting of solids. Their thickness, often considered a negligible parameter, affects cell mechanosensing or the shape of sessile droplets. Here, we show that the adjustment of coating thickness provides control over energy dissipation during the spreading of flowing matter on a gel layer. We combine experiments and theory to provide an analytical description of both the statics and the dynamics of the contact line between the gel, the liquid, and the surrounding atmosphere. We extract from this analysis a hitherto-unknown scaling law that predicts the dynamic contact angle between the three phases as a function of the properties of the coating and the velocity of the contact line. Finally, we show that droplets moving on vertical substrates coated with gel layers having linear thickness gradients drift toward regions of higher energy dissipation. Thus, thickness control opens the opportunity to design a priori the path followed by large droplets moving on gel-coated substrates. Our study shows that thickness is another parameter, besides surface energy and substrate mechanics, to tune the dynamics of liquid spreading and wetting on a compliant coating, with potential applications in dew collection and free-surface flow control.
| S-EPMC5828581 | biostudies-literature
Project description:Hyperpolarization of substrates for magnetic resonance spectroscopy (MRS) and imaging (MRI) by dissolution dynamic nuclear polarization (D-DNP) usually involves saturating the ESR transitions of polarizing agents (PAs; e.g., persistent radicals embedded in frozen glassy matrices). This approach has shown enormous potential to achieve greatly enhanced nuclear spin polarization, but the presence of PAs and/or glassing agents in the sample after dissolution can raise concerns for in vivo MRI applications, such as perturbing molecular interactions, and may induce the erosion of hyperpolarization in spectroscopy and MRI. We show that D-DNP can be performed efficiently with hybrid polarizing solids (HYPSOs) with 2,2,6,6-tetramethyl-piperidine-1-oxyl radicals incorporated in a mesostructured silica material and homogeneously distributed along its pore channels. The powder is wetted with a solution containing molecules of interest (for example, metabolites for MRS or MRI) to fill the pore channels (incipient wetness impregnation), and DNP is performed at low temperatures in a very efficient manner. This approach allows high polarization without the need for glass-forming agents and is applicable to a broad range of substrates, including peptides and metabolites. During dissolution, HYPSO is physically retained by simple filtration in the cryostat of the DNP polarizer, and a pure hyperpolarized solution is collected within a few seconds. The resulting solution contains the pure substrate, is free from any paramagnetic or other pollutants, and is ready for in vivo infusion.
| S-EPMC4205634 | biostudies-literature
Project description:Porous liquids are an emerging class of materials and to date little is known about how to best design their properties. For example, bulky solvents are required that are size-excluded from the pores in the liquid, along with high concentrations of the porous component, but both of these factors may also contribute to higher viscosities, which are undesirable. Hence, the inherent multivariate nature of porous liquids makes them amenable to high-throughput optimisation strategies. Here we develop a high-throughput robotic workflow, encompassing the synthesis, characterisation and property testing of highly-soluble, vertex-disordered porous organic cages dissolved in a range of cavity-excluded solvents. As a result, we identified 29 cage-solvent combinations that combine both higher cage-cavity concentrations and more acceptable carrier solvents than the best previous examples. The most soluble materials gave three times the pore concentration of the best previously reported scrambled cage porous liquid, as demonstrated by increased gas uptake. We were also able to explore alternative methods for gas capture and release, including liberation of the gas by increasing the temperature. We also found that porous liquids can form gels at higher concentrations, trapping the gas in the pores, which could have potential applications in gas storage and transportation.
| S-EPMC7017875 | biostudies-literature
Project description:Negative gas adsorption (NGA) in ordered mesoporous solids is associated with giant contractive structural transitions traversing through metastable states. Here, by systematically downsizing the crystal dimensions of a mesoporous MOF (DUT-49) from several micrometers to less than 200?nm, counterintuitive NGA phenomena are demonstrated to critically depend on the primary crystallite size. Adsorbing probe molecules, such as n-butane or nitrogen, gives insights into size-dependent activation barriers and thermodynamics associated with guest-induced network contraction. Below a critical crystal size, the nitrogen adsorption-induced breathing is completely suppressed as detected using parallelized synchrotron X-ray diffraction-adsorption instrumentation. In contrast, even the smallest particles show NGA in the presence of n-butane, however, associated with a significantly reduced pressure amplification. Consequently, the magnitude of NGA in terms of amount of gas expulsed and pressure amplification can be tuned, potentially paving the way towards innovative concepts for pressure amplification in micro- and macro-system engineering.
| S-EPMC5910435 | biostudies-literature
Project description:Porous liquids are a new class of material that could have applications in areas such as gas separation and homogeneous catalysis. Here we use a combination of measurement techniques, molecular simulations, and control experiments to advance the quantitative understanding of these liquids. In particular, we show that the cage cavities remain unoccupied in the absence of a suitable guest, and that the liquids can adsorb large quantities of gas, with gas occupancy in the cages as high as 72% and 74% for Xe and SF6, respectively. Gases can be reversibly loaded and released by using non-chemical triggers such as sonication, suggesting potential for gas separation schemes. Diffusion NMR experiments show that gases are in dynamic equilibrium between a bound and unbound state in the cage cavities, in agreement with recent simulations for related porous liquids. Comparison with gas adsorption in porous organic cage solids suggests that porous liquids have similar gas binding affinities, and that the physical properties of the cage molecule are translated into the liquid state. By contrast, some physical properties are different: for example, solid homochiral porous cages show enantioselectivity for chiral aromatic alcohols, whereas the equivalent homochiral porous liquids do not. This can be attributed to a loss of supramolecular organisation in the isotropic porous liquid.
| S-EPMC5431659 | biostudies-literature
Project description:The Magnetoelectric (ME) effect in solids is a prominent cross correlation phenomenon, in which the electric field (E) controls the magnetization (M) and the magnetic field (H) controls the electric polarization (P). A rich variety of ME effects and their potential in practical applications have been investigated so far within the transition-metal compounds. Here, we report a possible way to realize the ME effect in organic molecular solids, in which two molecules build a dimer unit aligned on a lattice site. The linear ME effect is predicted in a long-range ordered state of spins and electric dipoles, as well as in a disordered state. One key of the ME effect is a hidden ferroic order of the spin-charge composite object. We provide a new guiding principle of the ME effect in materials without transition-metal elements, which may lead to flexible and lightweight multifunctional materials.
| S-EPMC4753515 | biostudies-literature