Dataset Information

A novel 3D-printed head phantom with anatomically realistic geometry and continuously varying skull resistivity distribution for electrical impedance tomography.

ABSTRACT: Phantom experiments are an important step for testing during the development of new hardware or imaging algorithms for head electrical impedance tomography (EIT) studies. However, due to the sophisticated anatomical geometry and complex resistivity distribution of the human head, constructing an accurate phantom for EIT research remains challenging, especially for skull modelling. In this paper, we designed and fabricated a novel head phantom with anatomically realistic geometry and continuously varying skull resistivity distribution based on 3D printing techniques. The skull model was constructed by simultaneously printing the distinct layers inside the skull with resistivity-controllable printing materials. The entire phantom was composed of saline skin, a 3D-printed skull, saline cerebrospinal fluid (CSF) and 3D-printed brain parenchyma. The validation results demonstrated that the resistivity of the phantom was in good agreement with that of human tissue and was stable over time, and the new phantom performed well in EIT imaging. This paper provides a standardized, efficient and reproducible method for the construction of a head phantom for EIT that could be easily adapted to other conditions for manufacturing head phantoms for brain function research, such as transcranial direct current stimulation (TDCS) and electroencephalography (EEG).

SUBMITTER: Zhang J

PROVIDER: S-EPMC5496891 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

A novel 3D-printed head phantom with anatomically realistic geometry and continuously varying skull resistivity distribution for electrical impedance tomography.

Zhang Jie J Yang Bin B Li Haoting H Fu Feng F Shi Xuetao X Dong Xiuzhen X Dai Meng M

Scientific reports 20170704 1

Phantom experiments are an important step for testing during the development of new hardware or imaging algorithms for head electrical impedance tomography (EIT) studies. However, due to the sophisticated anatomical geometry and complex resistivity distribution of the human head, constructing an accurate phantom for EIT research remains challenging, especially for skull modelling. In this paper, we designed and fabricated a novel head phantom with anatomically realistic geometry and continuously ...[more]

PMID: 28676697

Similar Datasets

Project description:PURPOSE:This work aims to develop a simple, anatomically and haptically realistic vascular phantom, compatible with intravascular and intracardiac ultrasound. The low-cost, dual-layered phantom bridges the gap between traditional wall-only and wall-less phantoms by showing both the vessel wall and surrounding tissue in ultrasound imaging. This phantom can better assist clinical tool training, testing of intravascular devices, blood flow studies, and validation of algorithms for intravascular and intracardiac surgical systems. METHODS:Polyvinyl alcohol cryogel (PVA-c) incorporating a scattering agent was used to obtain vessel and tissue-mimicking materials. Our specific design targeted the inferior vena cava and renal bifurcations which were modelled using CAD software. A custom mould and container were 3D-printed for shaping the desired vessel wall. Three phantoms were prepared by varying both the concentrations of scattering agent as well as the number of freeze-thaw cycles to which the phantom layers were subjected during the manufacturing process. Each phantom was evaluated using ultrasound imaging using the Foresight™ ICE probe. Geometrical validation was provided by comparing CAD design to a CT scan of the phantom. RESULTS:The desired vascular phantom was constructed using 2.5% and 0.05% scattering agent concentration in the vessel and tissue-mimicking layers, respectively. Imaging of the three phantoms showed that increasing the number of freeze-thaw cycles did not significantly enhance the image contrast. Comparison of the US images with their CT equivalents resulted in an average error of 0.9[Formula: see text] for the lumen diameter. CONCLUSION:The phantom is anatomically realistic when imaged with intracardiac ultrasound and provides a smooth lumen for the ultrasound probe and catheter to manoeuvre. The vascular phantom enables validation of intravascular and intracardiac image guidance systems. The simple construction technique also provides a workflow for designing complex, multi-layered arterial phantoms.

Dataset Information

A novel 3D-printed head phantom with anatomically realistic geometry and continuously varying skull resistivity distribution for electrical impedance tomography.

Publications

A novel 3D-printed head phantom with anatomically realistic geometry and continuously varying skull resistivity distribution for electrical impedance tomography.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure