Biopolymer Green Lubricant for Sustainable Manufacturing.
Ontology highlight
ABSTRACT:
SUBMITTER: Shi SC
PROVIDER: S-EPMC5503078 | biostudies-other | 2016 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:It is critical to develop a low-cost and environmentally friendly system to manufacture and recycle lithium-ion batteries (LIBs) as the demand on LIBs keeps increasing dramatically. Conventional LIB cathodes are manufactured using N-methyl-2-pyrrolidone as the solvent, which is expensive, highly toxic, flammable, and energy intensive to produce and recover. Ideally, a close-loop industrial supply chain should be built, in which the batteries are manufactured, market harvested, and recycled with minimal external toxic solvent through the whole system. This work demonstrates a green and more sustainable manufacturing method for LIBs where no hazardous organic solvent is used during electrode manufacturing and recycling. The electrodes fabricated via water-based processing demonstrate comparable rate performance and cycle life to the ones from conventional solvent-based processing. Utilization of a water-soluble binder enables recovering the cathode compound from spent electrodes using water, which is successfully regenerated to deliver comparable electrochemical performance to the pristine one.
| S-EPMC7205902 | biostudies-literature
Project description:Manufacturing companies in today's industrial world are seeking to use the new manufacturing process methods. The primary goal of corporations is to achieve optimum production while deploying minimal capital. The fundamental purpose of this study is to examine the influence of various lean manufacturing practices on the sustainability performance of companies and the mediating role of green supply chain management (GSCM). The data was gathered using questionnaires from 250 Pakistani manufacturing firms and analyzed using AMOS 25. Results demonstrate that process and equipment, product design, supplier relationships, and customer relationships significantly affect sustainable performance. It is also recognized that Green Supply Chain Management mediates the interaction between HR processes, product design, supplier relationship, customer relationship, and environmental performance. The findings of this study will enable managers and decision-makers of manufacturing companies to increase sustainable efficiency and reduce waste through the use of lean manufacturing and GSCM implementation.
| S-EPMC8761733 | biostudies-literature
Project description:Carboxycellulose nanofibers (CNFs) promise to be a sustainable and inexpensive alternative material for polymer electrolyte membranes compared to the expensive commercial Nafion membrane. However, its practical applications have been limited by its relatively low performance and reduced mechanical properties under typical operating conditions. In this study, carboxycellulose nanofibers were derived from wood pulp by TEMPO oxidation of the hydroxyl group present on the C6 position of the cellulose chain. Then, citric acid cross-linked CNF membranes were prepared by a solvent casting method to enhance performance. Results from FT-IR spectroscopy, 13C NMR spectroscopy, and XRD reveal a chemical cross-link between the citric acid and CNF, and the optimal fuel cell performance was obtained by cross-linking 70 mL of 0.20 wt % CNF suspension with 300 µL of 1.0 M citric acid solution. The membrane electrode assemblies (MEAs), operated in an oxygen atmosphere, exhibited the maximum power density of 27.7 mW cm-2 and the maximum current density of 111.8 mA cm-2 at 80 °C and 100% relative humidity (RH) for the citric acid cross-linked CNF membrane with 0.1 mg cm-2 Pt loading on the anode and cathode, which is approximately 30 times and 22 times better, respectively, than the uncross-linked CNF film. A minimum activation energy of 0.27 eV is achieved with the best-performing citric acid cross-linked CNF membrane, and a proton conductivity of 9.4 mS cm-1 is obtained at 80 °C. The surface morphology of carboxycellulose nanofibers and corresponding membranes were characterized by FIB/SEM, SEM/EDX, TEM, and AFM techniques. The effect of citric acid on the mechanical properties of the membrane was assessed by tensile strength DMA.
| S-EPMC9741098 | biostudies-literature
Project description:Photoelectrochemical (PEC) conversion of solar light into chemical fuels is one of the most promising solutions to the challenge of sustainable energy. Graphitic carbon (IV) nitride polymer (g-CN) is an interesting sustainable photocathode material due to low-cost, visible-light sensitivity, and chemical stability up to 500 °C in air. However, grain boundary effects and limited active sites greatly hamper g-CN activity. Here, we demonstrate biopolymer-activation of g-CN through simultaneous soft-templating of a sponge-like structure and incorporation of active carbon-dopant sites. This facile approach results in an almost 300% increase in the cathodic PEC activity of g-CN under simulated solar-irradiation.
| S-EPMC3703604 | biostudies-literature
Project description:Under the dual background of global industrial value chain and low-carbon emission reduction, the green transformation and upgrading of the manufacturing industry is an important way to promote production and promote sustainable economic development. Considering that the green transformation of the manufacturing industry is a typical complex adaptation system, based on the intrinsic relationship between the dynamic theory and the green transformation of the manufacturing industry, this paper takes the endogenous variable of the transformation of manufacturing enterprises as the entry point, simulates the transformation of new and old dynamic energy of green transformation, and explores the mechanism of green transformation and upgrading of manufacturing industry and the conversion process. According to the model, it is concluded that the green transformation of manufacturing enterprises is the result of the multi-stage transformation of enterprises. In this process, the change inertia overcomes old dynamic inertia and promotes the new dynamic to gradually replace the old dynamic. At the end of the article, specific suggestions are given to promote the green transformation of manufacturing enterprises from the aspects of ideology, policy support, digital empowerment, financial service guarantee system and communication and cooperation.
| S-EPMC9858057 | biostudies-literature
Project description:Manufacturing is a crucial activity of product development that feeds into and is also influenced by the design process. Any material conservation gained during manufacturing directly affects the green credentials of a product. Manufacturing waste can be contrived to approach zero through a recently developed frugal design approach that quantifies resource conservation at all stages of development of a product engineered for frugality. Accordingly, this effort presents frugal manufacturing (FM), integral to the frugal design approach, for utmost reduction of waste while aiming for good surface integrity, better properties, minimal number of processes and low cost. Other than saving on energy and hence emissions, the new concept of FM also goes beyond current near net shape technologies, which advocate mainly for zero wastage and suitable properties while using a narrow range of manufacturing processes. Case studies involving high-speed machining, superplastic forming and additive manufacturing of aerospace alloys have been presented that bring out the features and benefits of FM. As such the multipronged objectives of FM should be dovetailed with those of smart factories for creating novel technologies that abet widespread sustainable development. Such enhancement of the smart factories concept has been argued to support unusual applications such as the fight against pandemics including the current one involving COVID-19.
| S-EPMC8633781 | biostudies-literature
Project description:The use of nanocellulose in pharmaceutics is a trend that has emerged in recent years. Its inherently good mechanical properties, compared to different materials, such as its high tensile strength, high elastic modulus and high porosity, as well as its renewability and biodegradability are driving nanocellulose's industrial use and innovations. In this sense, this study aims to conduct a search of patents from 2011 to 2023, involving applications of nanocellulose in pharmaceuticals. A patent search was carried out, employing three different patent databases: Patentscope from World Intellectual Property Organization (WIPO); Espacenet; and LENS.ORG. Patents were separated into two main groups, (i) nanocellulose (NC) comprising all its variations and (ii) bacterial nanocellulose (BNC), and classified into five major areas, according to their application. A total of 215 documents was retrieved, of which 179 were referred to the NC group and 36 to the BNC group. The NC group depicted 49.7%, 15.6%, 16.2%, 8.9% and 9.5% of patents as belonging to design and manufacturing, cell culture systems, drug delivery, wound healing and tissue engineering clusters, respectively. The BNC group classified 44.5% of patents as design and manufacturing and 30.6% as drug delivery, as well as 5.6% and 19.4% of patents as wound healing and tissue engineering, respectively. In conclusion, this work compiled and classified patents addressing exclusively the use of nanocellulose in pharmaceuticals, providing information on its current status and trending advancements, considering environmental responsibility and sustainability in materials and products development for a greener upcoming future.
| S-EPMC10819157 | biostudies-literature
Project description:Laser material deposition based restoration of high-value components can be a revolutionary technology in remanufacturing. The deposition process induces residual stresses due to thermomechanical behavior and metallurgical transformations. The presence of tensile residual stresses in the deposited layer will compromise the fatigue life of the restored component. We have developed a novel fully coupled metallurgical, thermal and mechanical (metallo-thermomechanical) model to predict residual stresses and identified a critical deposition height, which ensures compressive residual stresses in the deposited layer. Any lower deposition height will result in tensile residual stresses and higher deposition height will result in excessive dilution (substrate melting). We have validated the model using neutron and micro-focus X-ray diffraction measurements. This study highlights that the critical deposition height corresponds to the minimum cooling rate during solidification. It addresses one of the major outstanding problems of additive manufacturing and paves a way for "science-enabled-technology" solutions for sustainable restoration/remanufacturing.
| S-EPMC6170464 | biostudies-literature
Project description:Malva parviflora L. is an edible and medicinal herb containing mucilaginous cells in its leaves. Mucilage obtained from M. parviflora leaves (MLM) was extracted in distilled water (1:10 w/v) at 70 °C followed by precipitation with alcohol. Preliminary phytochemical tests were performed to assess the purity of the extracted mucilage. Results showed that the yield of mucilage was 7.50%, and it was free from starch, alkaloids, glycosides, saponins, steroids, lipids and heavy metals. MLM had 16.19% carbohydrates, 13.55% proteins and 4.76% amino acids, which indicate its high nutritional value. Physicochemical investigations showed that MLM is neutral and water-soluble, having 5.84% moisture content, 15.60% ash content, 12.33 swelling index, 2.57 g/g water-holding capacity and 2.03 g/g oil-binding capacity. The functional properties, including emulsion capacity, emulsion stability, foaming capacity and stability increased with increased concentrations. Micromeritic properties, such as bulk density, tapped density, Carr's index, Hausner ratio, and angle of repose, were found to be 0.69 g/cm3, 0.84 g/cm3, 17.86%, 1.22 and 28.5, respectively. Scanning electron microscopy (SEM) showed that MLM is an amorphous powder possessing particles of varying size and shape; meanwhile, rheological studies revealed the pseudoplastic behavior of MLM. The thermal transition process of MLM revealed by a differential scanning calorimetry (DSC) thermogram, occurring at a reasonable enthalpy change (∆H), reflects its good thermal stability. The presence of functional groups characteristic of polysaccharides was ascertained by the infrared (IR) and gas chromatography/mass spectrometry (GC/MS) analyses. GC revealed the presence of five neutral monosaccharides; namely, galactose, rhamnose, arabinose, glucose and mannose, showing 51.09, 10.24, 8.90, 1.80 and 0.90 mg/g of MLM, respectively. Meanwhile, galacturonic acid is the only detected acidic monosaccharide, forming 15.06 mg/g of MLM. It showed noticeable antioxidant activity against the DPPH (1,1-diphenyl-2-picrylhydrazyl) radical with an IC50 value of 154.27 µg/mL. It also prevented oxidative damage to DNA caused by the Fenton reagent, as visualized in gel documentation system. The sun protection factor was found to be 10.93 ± 0.15 at 400 µg/mL. Thus, MLM can be used in food, cosmetic and pharmaceutical industry and as a therapeutic agent due to its unique properties.
| S-EPMC8659702 | biostudies-literature
Project description:Design for Environment (DfE) principles are helpful for integrating manufacturing-specific environmental sustainability considerations into product and process design. However, such principles are often overly general, static, and disconnected from production contexts. This paper proposes a visual analytics-based framework for generating DfE principles that are contextualized to specific production setups. These principles are generated through interactive visual exploration of design and process parameters as well as manufacturing process performance metrics corresponding to the production setup. We also develop a formal schema for aiding storage, updating, and reuse of the generated DfE principles. In this schema, each DfE principle is associated with corresponding product lifecycle data and the evidence that led to the generation of that principle. We demonstrate the proposed visual analytics framework using data from an industry-led experiment that compared dry ice based and oil based milling for a specific production setup.
| S-EPMC6605087 | biostudies-literature