Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An Efficient Violet Amplified Spontaneous Emission (ASE) from a Conjugated Polymer (PFO-co-pX) in Solution.

ABSTRACT: The optical of conjugated polymer poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(2,5-p-xylene)] also known as [(PFO-co-pX), ADS145UV], dissolved in a few solvents, has been measured. The absorption, emission spectra, and quantum yield have been investigated by using a spectrophotometer and spectrofluorometer, respectively. The properties of Amplified Spontaneous Emission (ASE) of conjugated PFO-co-pX polymer under different conditions such as solvent type, concentration, and pumping energy have been examined by using the tripled frequency of a Nd:YAG laser as a source of pumping. The relation between output energy and pumping energy for the samples with different concentrations in three solvents has been studied. In addition, efficiency and optical gain from the ASE were measured. Additionally, the stability of this polymer as a laser material was investigated. Among the host of conjugated polymer lasers obtained by optical pumping, this conjugated polymer has exhibited only one ASE band under a wide range of concentrations and pump power values. This is most likely due to the steric hindrance by the copolymer segment pX (2,5-p-xylene). This investigation has provided new insights into the excited state dynamics of conjugated polymer materials and has shown that this new conjugated polymer is quite efficient in the violet region.

SUBMITTER: Abdulaziz Alfahd S

PROVIDER: S-EPMC5503314 | biostudies-other | 2017 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Gamma-Irradiation Effects on the Spectral and Amplified Spontaneous Emission (ASE) Properties of Conjugated Polymers in Solution.

Project description:In this paper, we investigate the effects of gamma (γ) radiation on the spectral and mplified spontaneous emission (ASE) properties of two conjugated polymers (CPs) viz., poly [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH⁻PPV) (CPM) and poly{[2-[2',5'-bis(2″-ethylhexyloxy)phenyl]-1,4-phenylenevinylene]-co-[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene]} (BEHP-co-MEH⁻PPV) (BMP) in tetrahydrofuran (THF). Gamma irradiation strongly affected the photophysical properties of these CPs. To explore these changes, gamma radiation, in the range of 2⁻50 kGy, was used to maintain the temperature at 5 °C constant for all doses at a dose rate of 12.67 kGy/h, using a 60Co gamma ray. The ASE profiles of the CPs in THF were obtained under the high power excitation of a Nd:YAG laser (355 nm), pre- and post-radiation. The result revealed a dramatic blue shift of the fluorescence and the ASE spectra after gamma irradiation. This shift in the luminescence and ASE spectra could be a response to the conformational disorders such as gamma irradiation-induced polymer crosslinking, which was verified using Raman spectra, FTIR, and swelling experiments. This could be the first report on the effect of gamma radiation on the ASE properties of conjugated polymers.

| S-EPMC6432246 | biostudies-literature

Flexible all-polymer waveguide for low threshold amplified spontaneous emission.

Project description:The fabrication of all polymer optical waveguides, based on a highly fluorescent conjugated polymer (CP) poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) and a mechanically flexible and biodegradable polymer, cellulose acetate (CA), is reported. The replication by hot embossing of patterned surfaces in CA substrates, onto which high quality F8BT films can be easily processed by spin coating, is exploited to produce an entirely plastic device that exhibits low optical loss and low threshold for amplified spontaneous emission (ASE). As a result, highly transparent and flexible waveguides are obtained, with excellent optical properties that remain unaltered after bending, allowing them to be adapted in various flexible photonic devices.

| S-EPMC5043348 | biostudies-literature

Amplified Spontaneous Emission in Paper.

Project description:Industrially produced copy paper is presented as a novel optical material for narrow-band stimulated emission. Fluorescent brightening agents (FBA) such as Calcofluor White provide enough gain to exceed the threshold for amplified spontaneous emission. By applying an additional dye such as Coumarin 307, or simply a highlighter pen, the emission line can be shifted from blue (~440 nm), towards turquoise (>480 nm), up to orange (590 nm) which can be useful for spectroscopic applications. These properties are demonstrated in two papers, a commercial copy paper and a FBA-stained calligraphy paper.

| S-EPMC6372576 | biostudies-literature

High-power amplified spontaneous emission pulses with tunable coherence for efficient non-linear processes.

Project description:We report on a detailed study of an amplified spontaneous emission source operated in a pulsed regime with particular attention paid to the influence of high-intensity chaotic temporal events on the generation of nonlinear processes. To this aim, we have developed a monolithic high-power fiber system delivering partially coherent pulses of adjustable coherence. We also have demonstrated a non-linear method to characterize the stochastic properties of the source mitigating the bandwidth limitation of linear techniques. Measured parameters of the source for various configurations are presented. An enhanced classical model has been established to reproduce the statistical properties of the source and predict the behaviour when exciting non-linear processes. Finally, a non-linear process (second harmonic generation) is investigated comparing the efficiency when the process is pumped by a pulsed beam with maximal and low coherence.

| S-EPMC7921131 | biostudies-literature

Amplified Spontaneous Emission Threshold Dependence on Determination Method in Dye-Doped Polymer and Lead Halide Perovskite Waveguides.

Project description:Nowadays, the search for novel active materials for laser devices is proceeding faster and faster thanks to the development of innovative materials able to combine excellent stimulated emission properties with low-cost synthesis and processing techniques. In this context, amplified spontaneous emission (ASE) properties are typically investigated to characterize the potentiality of a novel material for lasers, and a low ASE threshold is used as the key parameter to select the best candidate. However, several different methods are currently used to define the ASE threshold, hindering meaningful comparisons among various materials. In this work, we quantitatively investigate the ASE threshold dependence on the method used to determine it in thin films of dye-polymer blends and lead halide perovskites. We observe a systematic ASE threshold dependence on the method for all the different tested materials, and demonstrate that the best method choice depends on the kind of information one wants to extract. In particular, the methods that provide the lowest ASE threshold values are able to detect the excitation regime of early-stage ASE, whereas methods that are mostly spread in the literature return higher thresholds, detecting the excitation regime in which ASE becomes the dominant process in the sample emission. Finally, we propose a standard procedure to properly characterize the ASE threshold, in order to allow comparisons between different materials.

| S-EPMC9268657 | biostudies-literature

Dual Amplified Spontaneous Emission and Lasing from Nanographene Films.

Project description:Chemically synthesized zigzag-edged nanographenes (NG) have recently demonstrated great success as the active laser units in solution-processed organic distributed feedback (DFB) lasers. Here, we report the first observation of dual amplified spontaneous emission (ASE) from a large-size NG derivative (with 12 benzenoid rings) dispersed in a polystyrene film. ASE is observed simultaneously at the 685 and 739 nm wavelengths, which correspond to different transitions of the photoluminescence spectrum. Ultrafast pump-probe spectroscopy has been used to ascertain the underlying photophysical processes taking place in the films. DFB lasers, based on these materials and top-layer nanostructured polymeric resonators (i.e., one or two-dimensional surface relief gratings), have been fabricated and characterized. Lasers emitting close to either one of the two possible ASE wavelengths, or simultaneously at both of them, have been prepared by proper selection of the resonator parameters.

| S-EPMC7466616 | biostudies-literature

Electrically control amplified spontaneous emission in colloidal quantum dots.

Project description:Colloidal quantum dots (CQDs) are highly promising materials for light amplification thanks to their efficient photoluminescence, tunable emission wavelength and low-cost synthesis. Unfortunately, CQDs are suffering from band-edge state degeneracy which demands multiple excitons to achieve population inversion. As a result, non-radiative Auger recombination increases the lasing threshold and limits the gain lifetime. Here, benefiting from the negative charging, we demonstrate that the amplified spontaneous emission (ASE) threshold is controllable in a device where CQD film is exposed to an external electric field. Specifically, singly charged CQDs lower the threshold due to the preexisting electron in the conduction band, while strongly enhanced Auger recombination in doubly charged CQDs stymies the ASE. Experimental results and kinetic equation model show that ASE threshold reduces 10% even if our device only charges ~17% of the CQD population. Our results open new possibilities for controlling exciton recombination dynamics and achieving electrically pumped CQD lasers.

| S-EPMC6814376 | biostudies-literature

Electrically Switchable Amplified Spontaneous Emission from Lead Halide Perovskite Film.

Project description:Electrically tunable optical devices that allow for modulation and detection of the optical signals would be extremely beneficial for the next photonic and electronic technologies. Perovskite materials as an emerging excitonic one provide promising platforms because they offer excitons manipulated by an external electrical field and efficient coupling to light. However, so far, electrically modulated switches based on perovskite amplified spontaneous emission (ASE) still remain unexplored. Here, we prepared perovskite films on indium tin oxide substrates by a spin-coating method and characterized their ASE behaviors. Based on it, we designed and fabricated electrically switchable ASE devices of perovskite film based on a light-emitting diode device configuration. Under the externally applied current, this device exhibits good controllable optoelectronic switching behaviors. Furthermore, this photoelectric response can be modulated by the different current densities. Our strategy for electrically switchable perovskite ASE will promote integrated applications in optoelectronic devices and provide valuable experience for the development of electrically pumped perovskite lasers.

| S-EPMC8675001 | biostudies-literature

Continuous wave amplified spontaneous emission in phase-stable lead halide perovskites.

Project description:Sustained stimulated emission under continuous-wave (CW) excitation is a prerequisite for new semiconductor materials being developed for laser gain media. Although hybrid organic-inorganic lead-halide perovskites have attracted much attention as optical gain media, the demonstration of room-temperature CW lasing has still not been realized. Here, we present a critical step towards this goal by demonstrating CW amplified spontaneous emission (ASE) in a phase-stable perovskite at temperatures up to 120 K. The phase-stable perovskite maintains its room-temperature phase while undergoing cryogenic cooling and can potentially support CW lasing also at higher temperatures. We find the threshold level for CW ASE to be 387 W cm-2 at 80 K. These results indicate that easily-fabricated single-phase perovskite thin films can sustain CW stimulated emission, potential at higher temperatures as well, by further optimization of the material quality in order to extend the carrier lifetimes.

| S-EPMC6395683 | biostudies-literature

Attosecond interferometry with self-amplified spontaneous emission of a free-electron laser.

Project description:Light-phase-sensitive techniques, such as coherent multidimensional spectroscopy, are well-established in a broad spectral range, already spanning from radio-frequencies in nuclear magnetic resonance spectroscopy to visible and ultraviolet wavelengths in nonlinear optics with table-top lasers. In these cases, the ability to tailor the phases of electromagnetic waves with high precision is essential. Here we achieve phase control of extreme-ultraviolet pulses from a free-electron laser (FEL) on the attosecond timescale in a Michelson-type all-reflective interferometric autocorrelator. By varying the relative phase of the generated pulse replicas with sub-cycle precision we observe the field interference, that is, the light-wave oscillation with a period of 129 as. The successful transfer of a powerful optical method towards short-wavelength FEL science and technology paves the way towards utilization of advanced nonlinear methodologies even at partially coherent soft X-ray FEL sources that rely on self-amplified spontaneous emission.

| S-EPMC5459985 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data