A Simple Analytical Model for Magnetization and Coercivity of Hard/Soft Nanocomposite Magnets.
Ontology highlight
ABSTRACT:
SUBMITTER: Park J
PROVIDER: S-EPMC5504001 | biostudies-other | 2017 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Hard/soft permanent magnets have aroused many interests in the past two decades because of their potential in achieving giant energy products as well as their rich variety of magnetic behaviors. Nevertheless, the experimental energy products are much smaller than the theoretical ones due to the much smaller coercivity measured in the experiments. In this paper, the deterioration of the coercivity due to the interface atomic diffusion is demonstrated based on a three dimensional (3D) micromagnetic software (OOMMF) and a formula derived for the pinning field in a hard/soft multilayer, which can be applied to both permanent magnets and exchange-coupled-composite (ECC) media. It is found that the formation of the interface layer can decrease the coercivity by roughly 50%, which is responsible for the observed smaller coercivity in both composite and single-phased permanent magnets. A method to enhance the coercivity in these systems is proposed based on the discussions, consistent with recent experiments where excellent magnetic properties are achieved.
| S-EPMC4653640 | biostudies-literature
Project description:Magnetic ferrites such as Fe(3)O(4) and Fe(2)O(3) are extensively used in a range of applications because they are inexpensive and chemically stable. Here we show that rhodium-substituted ?-Fe(2)O(3), ?-Rh(x)Fe(2-x)O(3) nanomagnets prepared by a nanoscale chemical synthesis using mesoporous silica as a template, exhibit a huge coercive field (H(c)) of 27 kOe at room temperature. Furthermore, a crystallographically oriented sample recorded an H(c) value of 31 kOe, which is the largest value among metal-oxide-based magnets and is comparable to those of rare-earth magnets. In addition, ?-Rh(x)Fe(2-x)O(3) shows high frequency millimetre wave absorption up to 209 GHz. ?-Rh(0.14)Fe(1.86)O(3) exhibits a rotation of the polarization plane of the propagated millimetre wave at 220 GHz, which is one of the promising carrier frequencies (the window of air) for millimetre wave wireless communications.
| S-EPMC3658006 | biostudies-literature
Project description:Some of the best-performing high-temperature magnets are Sm-Co-based alloys with a microstructure that comprises an [Formula: see text] matrix and magnetically hard [Formula: see text] cell walls. This generates a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performance of Sm-Co magnets, but experiments and theory have not yet converged to a unified model. Here, transmission electron microscopy, atom probe tomography, and nanometer-resolution off-axis electron holography have been combined with micromagnetic simulations to reveal that the magnetization state in Sm-Co magnets results from curling instabilities and domain-wall pinning effects at the intersections of phases with different magnetic hardness. Additionally, this study has found that topologically non-trivial magnetic domains separated by a complex network of domain walls play a key role in the magnetic state by acting as nucleation sites for magnetization reversal. These findings reveal previously hidden aspects of magnetism in Sm-Co magnets and, by identifying weak points in the microstructure, provide guidelines for improving these high-performance magnetic materials.
| S-EPMC7713442 | biostudies-literature
Project description:A facile synthesis and isolation of pristine silicon tetrakis(trifluoromethanesulfonate), Si(OTf)4 , is reported, acting as the first neutral silicon-based Lewis superacid suitable towards soft and hard Lewis bases. Its OTf groups have a dual function: they are excellent leaving groups and modulate the degree of reactivity towards soft and hard Lewis bases. Exposed to soft Lewis donors, Si(OTf)4 leads to [L2 Si(OTf)4 ] complexes (L=isocyanide, thioether and carbonyl compounds) with retention of all Si-OTf bonds. In contrast, it can cleave C-X bonds (X=F, Cl) of hard organic Lewis bases with a high tendency to form SiX4 (X=F, Cl) after halide/triflate exchange. Most notable, Si(OTf)4 allows a gentle oxydefluorination of mono- and bis(trifluoromethyl)benzenes, resulting in the formation of the corresponding benzoylium species, which are stabilized by the weakly coordinating [Si(OTf)6 ] dianion.
| S-EPMC8252640 | biostudies-literature
Project description:We study collective modes in a classical system of particles with repulsive inverse-power-law (IPL) interactions in the fluid phase, near the fluid-solid coexistence (IPL melts). The IPL exponent is varied from n = 10 to n = 100 to mimic the transition from moderately soft to hard-sphere-like interactions. We compare the longitudinal dispersion relations obtained using molecular dynamic (MD) simulations with those calculated using the quasi-crystalline approximation (QCA) and find that this simple theoretical approach becomes grossly inaccurate for [Formula: see text]. Similarly, conventional expressions for high-frequency (instantaneous) elastic moduli, predicting their divergence as n increases, are meaningless in this regime. Relations of the longitudinal and transverse elastic velocities of the QCA model to the adiabatic sound velocity, measured in MD simulations, are discussed for the regime where QCA is applicable. Two potentially useful freezing indicators for classical particle systems with steep repulsive interactions are discussed.
| S-EPMC5554265 | biostudies-other
Project description:Reconstruction of complex craniomaxillofacial (CMF) defects is challenging due to the highly organized layering of multiple tissue types. Such compartmentalization necessitates the precise and effective use of cells and other biologics to recapitulate the native tissue anatomy. In this study, intra-operative bioprinting (IOB) of different CMF tissues, including bone, skin, and composite (hard/soft) tissues, is demonstrated directly on rats in a surgical setting. A novel extrudable osteogenic hard tissue ink is introduced, which induced substantial bone regeneration, with ≈80% bone coverage area of calvarial defects in 6 weeks. Using droplet-based bioprinting, the soft tissue ink accelerated the reconstruction of full-thickness skin defects and facilitated up to 60% wound closure in 6 days. Most importantly, the use of a hybrid IOB approach is unveiled to reconstitute hard/soft composite tissues in a stratified arrangement with controlled spatial bioink deposition conforming the shape of a new composite defect model, which resulted in ≈80% skin wound closure in 10 days and 50% bone coverage area at Week 6. The presented approach will be absolutely unique in the clinical realm of CMF defects and will have a significant impact on translating bioprinting technologies into the clinic in the future.
| S-EPMC8376234 | biostudies-literature
Project description:The paper presents results of validation of the anhysteretic magnetization model for a soft amorphous alloy with significant perpendicular anisotropy. The validation was carried out for the Jiles-Atherton model with Ramesh extension considering anisotropy. Due to the fact that it is difficult to measure anhysteretic magnetization directly, the soft magnetic core with negligible hysteresis was used. The results of validation indicate that the Jiles-Atherton model with Ramesh extension should be corrected to allow accurate modeling of the anhysteretic magnetization. The corrected model may be applied for modeling the cores of current transformers operating in a wide range of measured currents.
| S-EPMC5455830 | biostudies-other
Project description:When building the tree of life, variability of phylogenetic signal is often accounted for by partitioning gene sequences and testing for differences. The same considerations, however, are rarely applied to morphological data, potentially undermining its use in evolutionary contexts. Here, we apply partition heterogeneity tests to 59 animal datasets to demonstrate that significant differences exist between the phylogenetic signal conveyed by 'hard' and 'soft' characters (bones, teeth and shells versus myology, integument etc). Furthermore, the morphological partitions differ significantly in their consistency relative to independent molecular trees. The observed morphological differences correspond with missing data biases, and as such their existence presents a problem not only for phylogeny reconstruction, but also for interpretations of fossil data. Evolutionary inferences drawn from clades in which hard, readily fossilizable characters are relatively less consistent and different from other morphology (mammals, bivalves) may be less secure. More secure inferences might be drawn from the fossil record of clades that exhibit fewer differences, or exhibit more consistent hard characters (fishes, birds). In all cases, it will be necessary to consider the impact of missing data on empirical data, and the differences that exist between morphological modules.
| S-EPMC5745416 | biostudies-literature
Project description:Biomechanical modelling is a powerful tool for quantifying the evolution of functional performance in extinct animals to understand key anatomical innovations and selective pressures driving major evolutionary radiations. However, the fossil record is composed predominantly of hard parts, forcing palaeontologists to reconstruct soft tissue properties in such models. Rarely are these reconstruction approaches validated on extant animals, despite soft tissue properties being highly determinant of functional performance. The extent to which soft tissue reconstructions and biomechanical models accurately predict quantitative or even qualitative patterns in macroevolutionary studies is therefore unknown. Here, we modelled the masticatory system in extant rodents to objectively test the ability of current muscle reconstruction methods to correctly identify quantitative and qualitative differences between macroevolutionary morphotypes. Baseline models generated using measured soft tissue properties yielded differences in muscle proportions, bite force, and bone stress expected between extant sciuromorph, myomorph, and hystricomorph rodents. However, predictions from models generated using reconstruction methods typically used in fossil studies varied widely from high levels of quantitative accuracy to a failure to correctly capture even relative differences between macroevolutionary morphotypes. Our novel experiment emphasizes that correctly reconstructing even qualitative differences between taxa in a macroevolutionary radiation is challenging using current methods. Future studies of fossil taxa should incorporate systematic assessments of reconstruction error into their hypothesis testing and, moreover, seek to expand primary datasets on muscle properties in extant taxa to better inform soft tissue reconstructions in macroevolutionary studies.
| S-EPMC7935025 | biostudies-literature
Project description:Pollen's practically-indestructible shell structure has long inspired the biomimetic design of organic materials. However, there is limited understanding of how the mechanical, chemical, and adhesion properties of pollen are biologically controlled and whether strategies can be devised to manipulate pollen beyond natural performance limits. Here, we report a facile approach to transform pollen grains into soft microgel by remodeling pollen shells. Marked alterations to the pollen substructures led to environmental stimuli responsiveness, which reveal how the interplay of substructure-specific material properties dictates microgel swelling behavior. Our investigation of pollen grains from across the plant kingdom further showed that microgel formation occurs with tested pollen species from eudicot plants. Collectively, our experimental and computational results offer fundamental insights into how tuning pollen structure can cause dramatic alterations to material properties, and inspire future investigation into understanding how the material science of pollen might influence plant reproductive success.
| S-EPMC7081183 | biostudies-literature