Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Grain Boundary Character Dependence on Nucleation of Discontinuous Precipitates in Cu-Ti Alloys.

ABSTRACT: The dependence of the grain boundary character distribution for a Cu-4 at. % Ti polycrystal alloy (average grain size: 100 µm) on the nucleation of cellular discontinuous precipitates was systematically investigated. In an alloy over-aged at 723 K, cellular discontinuous precipitates consisted of a terminal Cu solid solution and a stable β-Cu₄Ti lamellae nucleated at grain boundaries. Electron backscatter diffraction analysis revealed that the discontinuous precipitation reaction preferentially occurred at random grain boundaries with a Σ value of more than 21 according to the coincidence site lattice theory. On the other hand, few cellular discontinuous precipitates nucleated at low-angle and low-Σ boundaries, particularly twin (Σ 3) boundaries. These findings suggest that the nucleation of discontinuous precipitates is closely correlated with grain boundary character and structure, and hence energy and/or diffusibility. It should therefore be possible to suppress the discontinuous precipitation reaction through control of the alloy's grain boundary energy, by means of texture control and third elemental addition.

SUBMITTER: Semboshi S

PROVIDER: S-EPMC5506957 | biostudies-other | 2017 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel.

Project description:In polycrystalline materials, grain boundaries are known to be a critical microstructural component controlling material's mechanical properties, and their characters such as misorientation and crystallographic boundary planes would also influence the dislocation dynamics. Nevertheless, many of generally used mechanistic models for deformation twin nucleation in fcc metal do not take considerable care of the role of grain boundary characters. Here, we experimentally reveal that deformation twin nucleation occurs at an annealing twin (Σ3{111}) boundary in a high-Mn austenitic steel when dislocation pile-up at Σ3{111} boundary produced a local stress exceeding the twining stress, while no obvious local stress concentration was required at relatively high-energy grain boundaries such as Σ21 or Σ31. A periodic contrast reversal associated with a sequential stacking faults emission from Σ3{111} boundary was observed by in-situ transmission electron microscopy (TEM) deformation experiments, proving the successive layer-by-layer stacking fault emission was the deformation twin nucleation mechanism, different from the previously reported observations in the high-Mn steels. Since this is also true for the observed high Σ-value boundaries in this study, our observation demonstrates the practical importance of taking grain boundary characters into account to understand the deformation twin nucleation mechanism besides well-known factors such as stacking fault energy and grain size.

| S-EPMC8055962 | biostudies-literature

The role of grain boundary scattering in reducing the thermal conductivity of polycrystalline XNiSn (X?=?Hf, Zr, Ti) half-Heusler alloys.

Project description:Thermoelectric application of half-Heusler compounds suffers from their fairly high thermal conductivities. Insight into how effective various scattering mechanisms are in reducing the thermal conductivity of fabricated XNiSn compounds (X?=?Hf, Zr, Ti, and mixtures thereof) is therefore crucial. Here, we show that such insight can be obtained through a concerted theory-experiment comparison of how the lattice thermal conductivity ? Lat(T) depends on temperature and crystallite size. Comparing theory and experiment for a range of Hf0.5Zr0.5NiSn and ZrNiSn samples reported in the literature and in the present paper revealed that grain boundary scattering plays the most important role in bringing down ? Lat, in particular so for unmixed compounds. Our concerted analysis approach was corroborated by a good qualitative agreement between the measured and calculated ? Lat of polycrystalline samples, where the experimental average crystallite size was used as an input parameter for the calculations. The calculations were based on the Boltzmann transport equation and ab initio density functional theory. Our analysis explains the significant variation of reported ? Lat of nominally identical XNiSn samples, and is expected to provide valuable insights into the dominant scattering mechanisms even for other materials.

| S-EPMC5653807 | biostudies-other

Competing nucleation of single- and double-layer Guinier-Preston zones in Al-Cu alloys.

Project description:Solid-state precipitation is a key heat-treatment strategy for strengthening engineering alloys. Therefore, predicting the precipitation process of localized solute-rich clusters, such as Guinier-Preston (GP) zones, is necessary. We quantitatively evaluated the critical nucleus size and nucleation barrier of GP zones in Al-Cu alloys, illustrating the precipitation preferences of single-layer (GP1) and double-layer (GP2) GP zones. Based on classical nucleation theory using an effective multi-body potential for dilute Al-Cu systems, our model predicted GP1 and GP2 precipitation sequences at various temperatures and Cu concentrations in a manner consistent with experimental observations. The crossover between formation enthalpy curves of GP1 and GP2 with increasing cluster size determines the critical conditions under which GP2 zones can nucleate without prior formation of GP1 zones. This relationship reflects competing interactions within and between clusters. The results illustrate the underlying mechanisms of competing nucleation between zones, and provide guidance for tailoring aging conditions to achieve desired mechanical properties for specific applications.

| S-EPMC7904818 | biostudies-literature

Grain boundary decohesion by nanoclustering Ni and Cr separately in CrMnFeCoNi high-entropy alloys.

Project description:The loss of ductility with temperature has been widely observed in tensile tests of single-phase face-centered cubic structured high-entropy alloys (HEAs). However, the fundamental mechanism for such a ductility loss remains unknown. Here, we show that ductility loss in the CrMnFeCoNi HEA upon deformation at intermediate temperatures is correlated with cracking at grain boundaries (GBs). Nanoclustering Cr, Ni, and Mn separately at GBs, as detected by atom probe tomography, reduces GB cohesion and promotes crack initiation along GBs. We further demonstrated a GB segregation engineering strategy to avoid ductility loss by shifting the fast segregation of principal elements from GBs into preexisting Cr-rich secondary phases. We believe that GB decohesion by nanoclustering multiprincipal elements is a common phenomenon in HEAs. This study not only provides insights into understanding ductility loss but also offers a strategy for tailoring ductility-temperature relations in HEAs.

| S-EPMC6897545 | biostudies-literature

A Direct Grain-Boundary-Activity Correlation for CO Electroreduction on Cu Nanoparticles.

Project description:Copper catalyzes the electrochemical reduction of CO to valuable C2+ products including ethanol, acetate, propanol, and ethylene. These reactions could be very useful for converting renewable energy into fuels and chemicals, but conventional Cu electrodes are energetically inefficient and have poor selectivity for CO vs H2O reduction. Efforts to design improved catalysts have been impeded by the lack of experimentally validated, quantitative structure-activity relationships. Here we show that CO reduction activity is directly correlated to the density of grain boundaries (GBs) in Cu nanoparticles (NPs). We prepared electrodes of Cu NPs on carbon nanotubes (Cu/CNT) with different average GB densities quantified by transmission electron microscopy. At potentials ranging from -0.3 V to -0.5 V vs the reversible hydrogen electrode, the specific activity for CO reduction to ethanol and acetate was linearly proportional to the fraction of NP surfaces comprised of GB surface terminations. Our results provide a design principle for CO reduction to ethanol and acetate on Cu. GB-rich Cu/CNT electrodes are the first NP catalysts with significant CO reduction activity at moderate overpotential, reaching a mass activity of up to ?1.5 A per gram of Cu and a Faradaic efficiency >70% at -0.3 V.

| S-EPMC4827560 | biostudies-literature

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application.

Project description:In the case of medical implants, foreign materials are preferential sites for bacterial adhesion and microbial contamination, which can lead to the development of prosthetic infections. Commercially biomedical TiNi shape memory alloys are the most commonly used materials for permanent implants in contact with bone and dental, and the prevention of infections of TiNi biomedical shape memory alloys in clinical cases is therefore a crucial challenge for orthopaedic and dental surgeons. In the present study, copper has been chosen as the alloying element for design and development novel ternary biomedical Ti?Ni?Cu shape memory alloys with antibacterial properties. The effects of copper alloying element on the microstructure, mechanical properties, corrosion behaviors, cytocompatibility and antibacterial properties of biomedical Ti?Ni?Cu shape memory alloys have been systematically investigated. The results demonstrated that Ti?Ni?Cu alloys have good mechanical properties, and remain the excellent shape memory effects after adding copper alloying element. The corrosion behaviors of Ti?Ni?Cu alloys are better than the commercial biomedical Ti?50.8Ni alloys. The Ti?Ni?Cu alloys exhibit excellent antibacterial properties while maintaining the good cytocompatibility, which would further guarantee the potential application of Ti?Ni?Cu alloys as future biomedical implants and devices without inducing bacterial infections.

| S-EPMC5126636 | biostudies-literature

Radioactive isotopes reveal a non sluggish kinetics of grain boundary diffusion in high entropy alloys.

Project description:High entropy alloys (HEAs) have emerged as a new class of multicomponent materials, which have potential for high temperature applications. Phase stability and creep deformation, two key selection criteria for high temperature materials, are predominantly influenced by the diffusion of constituent elements along the grain boundaries (GBs). For the first time, GB diffusion of Ni in chemically homogeneous CoCrFeNi and CoCrFeMnNi HEAs is measured by radiotracer analysis using the 63Ni isotope. Atom probe tomography confirmed the absence of elemental segregation at GBs that allowed reliable estimation of the GB width to be about 0.5 nm. Our GB diffusion measurements prove that a mere increase in number of constituent elements does not lower the diffusion rates in HEAs, but the nature of added constituents plays a more decisive role. The GB energies in both HEAs are estimated at about 0.8-0.9 J/m2, they are found to increase significantly with temperature and the effect is more pronounced for the CoCrFeMnNi alloy.

| S-EPMC5612997 | biostudies-literature

Stepwise work hardening induced by individual grain boundary in Cu bicrystal micropillars.

Project description:Vast experiments have demonstrated that the external specimen size makes a large difference in the deformation behavior of crystalline materials. However, as one important kind of internal planar defects, the role of grain boundary (GB) in small scales needs to be clarified in light of the scarce and inconsistent experimental results at present. Through compression of Cu bicrystal and its counterpart monocrystal micropillars, it is found that, in contrast to the monocrystals, the bicrystals are characterized by work hardening with discrete strain bursts. Interestingly, the stress rise between two adjacent strain bursts of the bicrystals increases with the decrease of specimen size. The results suggest that GBs play a critical role in the work hardening of materials in small scales, which may provide important implications to further understand the general work hardening behaviors of materials in the future.

| S-EPMC4614676 | biostudies-other

In vitro biocompatibility of Ti-Cp vs Ti-26Nb alloys on Saos-2 and THP-1 cells

Project description:This study assess the biocompatibility of Ti-26Nb compared to Ti-Cp, a reference in implantology, through the combination of conventional toxicological assay, morphological observations and transcriptomic analysis performed on two different cells line : Saos-2 and THP-1. The biocompatibility of Ti-Cp implants was evaluated in comparison with Ti-26Nb implants both having a mirror polished surface, studying cell proliferation (trypan blue and WST-1) and cell morphology/adhesion (SEM) on human THP-1 and Saos-2 cell lines. Finally, an evaluation of a potential toxicity of potassium niobiate powder KNbO3 was carried out by measuring metabolic activity and realizing a transcriptomic study on the THP-1 line (the first one) to deepen the results observed with Ti-26Nb discs. Indeed, niobiate ions are potentially released from implant in cellular acidic environnement. Concerning Saos-2 cells, our results suggest that Ti-26Nb and Ti-Cp discs do not impact proliferation and viability. Concerning THP-1 cell line, a decrease in proliferation and viability is observed in contact of Ti-26Nb discs (hypothesis of a cell-line effect ?, no biocompatibility study on monocyte/macrophage cell lines such as THP-1 actually available in literature). KNbO3 powder does not impact viability of THP-1 cells and does not induce changes at molecular level. Taken together, these data suggest a possible toxicity of Ti-26Nb toward THP-1 cells not directly related to the niobium but perhaps to the manufacturing process of Titane niobium alloy.

2022-08-31 | GSE197987 | GEO

Nucleation of shear bands in amorphous alloys.

Project description:The initiation and propagation of shear bands is an important mode of localized inhomogeneous deformation that occurs in a wide range of materials. In metallic glasses, shear band development is considered to center on a structural heterogeneity, a shear transformation zone that evolves into a rapidly propagating shear band under a shear stress above a threshold. Deformation by shear bands is a nucleation-controlled process, but the initiation process is unclear. Here we use nanoindentation to probe shear band nucleation during loading by measuring the first pop-in event in the load-depth curve which is demonstrated to be associated with shear band formation. We analyze a large number of independent measurements on four different bulk metallic glasses (BMGs) alloys and reveal the operation of a bimodal distribution of the first pop-in loads that are associated with different shear band nucleation sites that operate at different stress levels below the glass transition temperature, Tg. The nucleation kinetics, the nucleation barriers, and the density for each site type have been determined. The discovery of multiple shear band nucleation sites challenges the current view of nucleation at a single type of site and offers opportunities for controlling the ductility of BMG alloys.

| S-EPMC3964102 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data