Plasmonic Colour Filters Based on Coaxial Holes in Aluminium.
Ontology highlight
ABSTRACT:
SUBMITTER: Rajasekharan Unnithan R
PROVIDER: S-EPMC5506962 | biostudies-other | 2017 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The pixel size imposes a fundamental limit on the amount of information that can be displayed or recorded on a sensor. Thus, there is strong motivation to reduce the pixel size down to the nanometre scale. Nanometre colour pixels cannot be fabricated by simply downscaling current pixels due to colour cross talk and diffraction caused by dyes or pigments used as colour filters. Colour filters based on plasmonic effects can overcome these difficulties. Although different plasmonic colour filters have been demonstrated at the micron scale, there have been no attempts so far to reduce the filter size to the submicron scale. Here, we present for the first time a submicron plasmonic colour filter design together with a new challenge - pixel boundary errors at the submicron scale. We present simple but powerful filling schemes to produce submicron colour filters, which are free from pixel boundary errors and colour cross- talk, are polarization independent and angle insensitive, and based on LCD compatible aluminium technology. These results lay the basis for the development of submicron pixels in displays, RGB-spatial light modulators, liquid crystal over silicon, Google glasses and pico-projectors.
| S-EPMC4170198 | biostudies-literature
Project description:We systematically investigate the effects of surface roughness on the characteristics of ultraviolet zinc oxide plasmonic nanolasers fabricated on aluminium films with two different degrees of surface roughness. We demonstrate that the effective dielectric functions of aluminium interfaces with distinct roughness can be analysed from reflectivity measurements. By considering the scattering losses, including Rayleigh scattering, electron scattering, and grain boundary scattering, we adopt the modified Drude-Lorentz model to describe the scattering effect caused by surface roughness and obtain the effective dielectric functions of different Al samples. The sample with higher surface roughness induces more electron scattering and light scattering for SPP modes, leading to a higher threshold gain for the plasmonic nanolaser. By considering the pumping efficiency, our theoretical analysis shows that diminishing the detrimental optical losses caused by the roughness of the metallic interface could effectively lower (~33.1%) the pumping threshold of the plasmonic nanolasers, which is consistent with the experimental results.
| S-EPMC5206644 | biostudies-literature
Project description:Plasmonic colour printing based on engineered metasurfaces has revolutionized colour display science due to its unprecedented subwavelength resolution and high-density optical data storage. However, advanced plasmonic displays with novel functionalities including dynamic multicolour printing, animations, and highly secure encryption have remained in their infancy. Here we demonstrate a dynamic plasmonic colour display technique that enables all the aforementioned functionalities using catalytic magnesium metasurfaces. Controlled hydrogenation and dehydrogenation of the constituent magnesium nanoparticles, which serve as dynamic pixels, allow for plasmonic colour printing, tuning, erasing and restoration of colour. Different dynamic pixels feature distinct colour transformation kinetics, enabling plasmonic animations. Through smart material processing, information encoded on selected pixels, which are indiscernible to both optical and scanning electron microscopies, can only be read out using hydrogen as a decoding key, suggesting a new generation of information encryption and anti-counterfeiting applications.
| S-EPMC5333121 | biostudies-literature
Project description:A miniaturized mid-infrared spectral analyzer will find a wide range of applications as a portable device in non-invasive disease diagnosis, environmental monitoring, food safety and others. In this work, we report an integrated spectral analyzer that can be constructed by using Au subwavelength hole arrays as multispectral filters. The hole arrays were fabricated with CMOS compatible processes. The transmission peak of the subwavelength hole arrays is continuously tuned from 3??m to 14??m by linearly increasing the periodicity of the holes in each array. Fourier transform infrared (FTIR) microscopy was applied to spatially map out the transmission of the hole arrays. The results show that each hole array can selectively allow for transmission at a specific wavelength. We further constructed an IR spectral analyzer model based on the microhole multispectral filters to retrieve IR spectral information of two test samples. Our experimental results show that the spectra from the integrated spectral analyzer follow nearly the same pattern of the FTIR spectra of the test samples, proving the potential of the miniaturized spectral analyzer for chemical analysis.
| S-EPMC6062579 | biostudies-literature
Project description:We report the experimental realization of an optical metamaterial composed of a hexagonal array of coaxial plasmonic metal/insulator/metal waveguides that shows strong polarization-independent optical mode index dispersion in the ultraviolet/blue. The metamaterial is composed of silicon coaxes with a well-defined diameter in the range of 150-168 nm with extremely thin sidewalls (13-15 nm), embedded in a silver film, fabricated using a combination of electron beam lithography, physical vapor deposition, reactive ion etching, and focused ion beam polishing. Using a Mach-Zehnder interferometer the phase advance is measured on several metamaterial samples with different dimensions in the UV/visible part of the spectrum. For all geometries the spectral features as well as the geometry dependence of the data correspond well with numerical finite-difference time domain simulations and the calculated waveguide dispersion diagram, showing a negative mode index between 440 and 500 nm.
| S-EPMC4245717 | biostudies-literature
Project description:Dynamic, colour-changing surfaces have many applications including displays, wearables and active camouflage. Plasmonic nanostructures can fill this role by having the advantages of ultra-small pixels, high reflectivity and post-fabrication tuning through control of the surrounding media. However, previous reports of post-fabrication tuning have yet to cover a full red-green-blue (RGB) colour basis set with a single nanostructure of singular dimensions. Here, we report a method which greatly advances this tuning and demonstrates a liquid crystal-plasmonic system that covers the full RGB colour basis set, only as a function of voltage. This is accomplished through a surface morphology-induced, polarization-dependent plasmonic resonance and a combination of bulk and surface liquid crystal effects that manifest at different voltages. We further demonstrate the system's compatibility with existing LCD technology by integrating it with a commercially available thin-film-transistor array. The imprinted surface interfaces readily with computers to display images as well as video.
| S-EPMC5436230 | biostudies-literature
Project description:Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates controllable chromotropic capability, that is, the ability of reversible colour transformations. This chromotropic capability affords enormous potentials in building functionalized prints for anticounterfeiting, special label, and high-density data encryption storage. With such excellent performances in functional colour applications, this colour-printing approach could pave the way for plasmonic colour printing in real-world commercial utilization.
| S-EPMC4660354 | biostudies-literature
Project description:Red-green colour vision deficiency (CVD) affects ~ 4% of Caucasians. Notch filters exist to simulate CVD when worn by colour vision normal (CVN) observers (simulation tools), or to improve colour discrimination when worn by CVD observers (compensation tools). The current study assesses effects of simulation (Variantor) and compensation (EnChroma) filters on performance in a variety of tasks. Experiments were conducted on 20 CVN and 16 CVD participants under no-filter and filter conditions (5 CVN used Variantor; 15 CVN and 16 CVD used EnChroma). Participants were tested on Ishihara and Farnsworth-Munsell 100 hue tests, CVA-UMinho colour discrimination and colour naming tasks and a board-game colour-sorting task. Repeated-measures ANOVAs found Variantor filters to significantly worsen CVN performance, mimicking protanopia. Mixed-model and repeated-measures ANOVAs demonstrate that EnChroma filters do not significantly enhance performance in CVD observers. Key EnChroma results were replicated in 8 CVD children (Ishihara test) and a sub-sample of 6 CVD adults (CVA-UMinho colour discrimination and colour naming tasks) for a smaller stimulus size. Pattern similarity exists across hue for discrimination thresholds and naming errors. Variantor filters are effective at mimicking congenital colour vision defects in CVN observers for all tasks, however EnChroma filters do not significantly compensate for CVD in any.
| S-EPMC9249763 | biostudies-literature
Project description:Plasmonic color filters employing a single optically-thick nanostructured metal layer have recently generated considerable interest as an alternative to colorant-based color filtering technologies, due to their reliability, ease of fabrication, and high color tunability. However, their relatively low transmission efficiency (~30%) needs to be significantly improved for practical applications. The present work reports, for the first time, a novel plasmonic subtractive color filtering scheme that exploits the counter-intuitive phenomenon of extraordinary low transmission (ELT) through an ultrathin nanostructured metal film. This approach relies on a fundamentally different color filtering mechanism than that of existing plasmonic additive color filters, and achieves unusually high transmission efficiencies of 60 ~ 70% for simple architectures. Furthermore, owing to short-range interactions of surface plasmon polaritons at ELT resonances, our design offers high spatial resolution color filtering with compact pixel size close to the optical diffraction limit (~?/2), creating solid applications ranging from imaging sensors to color displays.
| S-EPMC3792416 | biostudies-literature
Project description:Plasmonic color filters (PCFs) can acquire primary colors from non-polarized incident light through a two-dimensional arrangement of subwavelength holes. However, owing to the geometry of the 2D array, unintended secondary transmitted peaks derived from the higher-order modes of the surface plasmon resonance (SPR) lead to color cross-talk with the primary peaks. Herein, we propose a complementary design method for generating high-purity red, green, and blue (R/G/B) by combining the G/B filters of hole-arrays with the R filters of dot-arrays. Metallic dot-array filters, wherein the wavelength band under 575?nm was effectively blocked by the induction of peak broadening, operated as optical high-pass filters exhibiting pure red, and consequently widen the color gamut of PCFs by 30% without loss of luminance and color tunability. This harmonious combination promises to yield competitiveness for a next-generation color filter by enhancing the color reproducibility of plasmonic nanostructures.
| S-EPMC5234004 | biostudies-literature