Al-Doped ZnO Monolayer as a Promising Transparent Electrode Material: A First-Principles Study.
Ontology highlight
ABSTRACT:
SUBMITTER: Wu M
PROVIDER: S-EPMC5506988 | biostudies-other | 2017 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Transparent anodes are indispensable components for optoelectronic devices. Two-dimensional (2D) materials are attracting increasing research interest due to their unique properties and promising applications. In order to design novel transparent anodes, we investigated the electronic, optical, and electrical properties of 2D ZnO monolayers doped with Al, Ga, and In using the first-principles calculation in combination with the Boltzmann transport theory. When the doping concentration of Al, Ga, and In is less than 12.5 wt %, we find that the average transmittance reaches up to 99% in the visible and UV regions. Moreover, the electrical conductivity is enhanced for the Al, Ga, and In doped systems compared to that of the pristine ZnO monolayer. In particular, a good electrical conductivity with a significant improvement for the In doped ZnO monolayer is achieved compared to Al and Ga doping at the 6.25 wt % level. These results suggest that the ZnO monolayer based materials, and in particular the In doped ZnO monolayer, are promising transparent anodes for nanoscale electronic and optoelectronic applications.
| S-EPMC5551746 | biostudies-other
Project description:We report on theoretical investigations of a methylammonium lead halide perovskite system loaded with iron oxide and aluminum zinc oxide (ZnO:Al/MAPbI3/Fe2O3) as a potential photocatalyst. When excited with visible light, this heterostructure is demonstrated to achieve a high hydrogen production yield via a z-scheme photocatalysis mechanism. The Fe2O3: MAPbI3 heterojunction plays the role of an electron donor, favoring the hydrogen evolution reaction (HER), and the ZnO:Al compound acts as a shield against ions, preventing the surface degradation of MAPbI3 during the reaction, hence improving the charge transfer in the electrolyte. Moreover, our findings indicate that the ZnO:Al/MAPbI3 heterostructure effectively enhances electrons/holes separation and reduces their recombination, which drastically improves the photocatalytic activity. Based on our calculations, our heterostructure yields a high hydrogen production rate, estimated to be 265.05 μmol/g and 362.99 μmol/g, respectively, for a neutral pH and an acidic pH of 5. These theoretical yield values are very promising and provide interesting inputs for the development of stable halide perovskites known for their superlative photocatalytic properties.
| S-EPMC10002523 | biostudies-literature
Project description:Recently, two dimensional transition metal dichalcogenides become popular research topics because of their unique crystal and electronic structure. In this work, the geometrical structure, electronic, electrical transport, redox potentials and photocatalytic properties of nonmetal (H, B, C, Si, N, P, As, O, S, Te, F, Cl, Br and I) doped monolayer MoSe2 were investigated by first principle calculations. The binding energy indicates that nonmetal doped MoSe2 are energetically favorable compared to Se vacancies, except B- and C-doped. We have found that nonmetal dopants with an even number of valence electrons doped MoSe2 have p-type conductivity. On the contrary, nonmetal dopants with an odd number of valence electrons doped MoSe2 have p-type or n-type conductivity; and they have better photocatalytic performance.
| S-EPMC5719077 | biostudies-literature
Project description:Based on the first principles of density functional theory, the adsorption behavior of H2CO on original monolayer MoS2 and Zn doped monolayer MoS2 was studied. The results show that the adsorption of H2CO on the original monolayer MoS2 is very weak, and the electronic structure of the substrate changes little after adsorption. A new kind of surface single cluster catalyst was formed after Zn doped monolayer MoS2, where the ZnMo3 small clusters made the surface have high selectivity. The adsorption behavior of H2CO on Zn doped monolayer MoS2 can be divided into two situations. When the H-end of H2CO molecule in the adsorption structure is downward, the adsorption energy is only 0.11 and 0.15 eV and the electronic structure of adsorbed substrate changes smaller. When the O-end of H2CO molecule is downward, the interaction between H2CO and the doped MoS2 is strong leading to the chemical adsorption with the adsorption energy of 0.80 and 0.98 eV. For the O-end-down structure, the adsorption obviously introduces new impurity states into the band gap or results in the redistribution of the original impurity states. All of these may lead to the change of the chemical properties of the doped MoS2 monolayer, which can be used to detect the adsorbed H2CO molecules. The results show that the introduction of appropriate dopant may be a feasible method to improve the performance of MoS2 gas sensor.
| S-EPMC8085485 | biostudies-literature
Project description:New two-dimensional (2D) transition-metal borides have attracted considerable interest in research on electrode materials for Li-ion batteries (LIBs) owing to their promising properties. In this study, 2D molybdenum boride (Mo2B2) with and without transition metal (TM, TM=Mn, Fe, Co, Ni, Ru, and Pt) atom doping was investigated. Our results indicated that all TM-doped Mo2B2 samples exhibited excellent electronic conductivity, similar to the intrinsic 2D Mo2B2 metal behavior, which is highly beneficial for application in LIBs. Moreover, we found that the diffusion energy barriers of Li along paths 1 and 2 for all TM-doped Mo2B2 samples are smaller than 0.30 and 0.24 eV of the pristine Mo2B2. In particular, for 2D Co-doped Mo2B2, the diffusion energy barriers of Li along paths 1 and 2 are reduced to 0.14 and 0.11 eV, respectively, making them the lowest Li diffusion barriers in both paths 1 and 2. This indicates that TM doping can improve the electrochemical performance of 2D Mo2B2 and that Co-doped Mo2B2 is a promising electrode material for LIBs. Our work not only identifies electrode materials with promising electrochemical performance but also provides guidance for the design of high-performance electrode materials for LIBs.
| S-EPMC11319228 | biostudies-literature
Project description:Using density functional theory and the Hubbard U method, we investigated the geometric structure, electronic structure, and optical property of Al/Ga-codoped ZnO. A 3 × 3 × 3 ZnO supercell was used to construct Al- and Ga-monodoped ZnO structures and Al/Ga-codoped ZnO (AGZO) structures. All three structures showed n-type conduction, and the optical band gaps were larger than that of pure ZnO. For a given impurity concentration, Ga impurities contribute more free carriers than Al impurities in AGZO. However, the presence of Al impurities improves the transmittance. These results can theoretically explain the factors that influence the electrical and optical properties.
| S-EPMC5456706 | biostudies-other
Project description:Aluminum-doped zinc oxide (AZO) is a popular, low-cost, nontoxic material that finds application as a transparent conducting electrode in photonic, sensing, and photovoltaic devices. We report the AZO thin films with a high figure of merit on large-area glass substrates by direct current magnetron sputtering without any intentional substrate heating. Furthermore, a simple thermal post-treatment to improve the transmittance of AZO thin film in the infrared region for its application in low-band-gap devices is presented. High optoelectronic properties are obtained by optimizing oxygen content during the sputtering process. The structural, morphological, optoelectrical, and photoluminescence characterization of cold sputtered AZO films is investigated for its latent applications. AZO thin films with an electrical sheet resistance of 8.8 Ω/□ and a visible light transmittance of 78.5% with thickness uniformity above 95% are achieved on 300 mm × 300 mm glass substrate. The AZO film with optimized process conditions is employed as a transparent electrode to fabricate a copper-indium-gallium-selenide-based thin film solar cell, demonstrating 11.8% power conversion efficiency. The AZO film with optimized sputter conditions was post-treated in ambient conditions with an Al blanket to suppress the resistivity by proper organization of the defects due to Al3+ consumption and point defects, resulting in improved transparency (85%) in the infrared region with a sheet resistance of 40 Ω/□. This has great potential for developing scalable and low-cost AZO thin films for transparent electrodes in a wide range of the spectrum.
| S-EPMC9089357 | biostudies-literature
Project description:Ti-doped ZnO thin films were obtained with the aim of tailoring ZnO film bioadhesiveness and making the optoelectronic properties of ZnO materials transferable to biological environments. The films were prepared on silicon substrates by sol-gel spin-coating and subsequent annealing. A Ti-O segregation limits the ZnO crystallite growth and creates a buffer out-layer. Consequently, the Ti-doped ZnO presents slightly increased resistivity, which remains in the order of 10-3 Ω·cm. The strong biochemical interference of Zn2+ ions released from pure ZnO surfaces was evidenced by culturing Staphylococcus epidermidis with and without the Zn2+ coupling agent clioquinol. The Ti-doped ZnO surfaces showed a considerable increase of bacterial viability with respect to pure ZnO. Cell adhesion was assayed with human mesenchymal stem cells (hMSCs). Although hMSCs find difficulties to adhere to the pure ZnO surface, they progressively expand on the surface of ZnO when the Ti doping is increased. A preliminary microdevice has been built on the Si substrate with a ZnO film doped with 5% Ti. A one-dimensional micropattern with a zigzag structure shows the preference of hMSCs for adhesion on Ti-doped ZnO with respect to Si. The induced contrast of surface tension further induces a cell polarization effect on hMSCs. It is suggested that the presence of Ti-O covalent bonding on the doped surfaces provides a much more stable ground for bioadhesion. Such fouling behavior suggests an influence of Ti doping on film bioadhesiveness and sets the starting point for the selection of optimal materials for implantable optoelectronic devices.
| S-EPMC6682115 | biostudies-literature
Project description:Solar energy hydrogen production is one of the best solutions for energy crisis. Therefore, finding effective photocatalytic materials that are able to split water under the sunlight is a hot topic in the present research fields. In addition, theoretical prediction is a present low-cost important method to search a new kind of materials. Herein, with the aim of seeking efficient photocatalytic material we investigated the photocatalytic activity of GaAs monolayer by the first principles calculation. According to the obtained electronic and optical properties, we primarily predicted the photocatalytic water splitting activity of GaAs monolayer, which the result further confirmed by the calculated reaction free energy. More remarkably, predicted carrier mobility of GaAs monolayer 2838 cm2V-1s-1 is higher than 200 cm2V-1s-1 of MoS2. Our finding provides a promising material for the development of renewable energy conversion and a new outlook for better designing of a superior photocatalyst for water splitting.
| S-EPMC7293266 | biostudies-literature
Project description:Using first-principles calculations, we have investigated the electronic structure and magnetic properties of Fe-X6 clusters (X = S, C, N, O, and F) incorporated in 4 × 4 monolayer MoS2, where a Mo atom is substituted by Fe and its nearest S atoms are substituted by C, N, O, and F. Single Fe and Fe-F6 substituions make the system display half-metallic properties, Fe-C6 and Fe-N6 substitutions lead to a spin gapless semiconducting behavior, and Fe-O6 doped monolayer MoS2 is semiconducting. Magnetic moments of 1.93, 1.45, 3.18, 2.08, and 2.21 μB are obtained for X = S, C, N, O, and F, respectively. The different electronic and magnetic characters originate from hybridization between the X and Fe/Mo atoms. Our results suggest that cluster doping can be an efficient strategy for exploring two-dimensional diluted magnetic semiconductors.
| S-EPMC3913919 | biostudies-other