Conductive Polymer Porous Film with Tunable Wettability and Adhesion.
Ontology highlight
ABSTRACT:
SUBMITTER: Teng Y
PROVIDER: S-EPMC5507056 | biostudies-other | 2015 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Functional materials with specific surface wettability play an important role in a wide variety of areas. Inspired by nature's Nepenthes pitcher plant, we present a novel slippery film with tunable wettability based on a shape-memory graphene sponge. The porous graphene sponge coated with shape-memory polymer was used to lock in inert lubricants and construct slippery surfaces to repel different liquids. The superelasticity and high strength, together with good electrical conductivity, of the graphene sponge imparted the graphene/polymer hybrid films with fast recoverable shape-memory properties. Various droplets could slip on the compressed film with a lubricant-covered surface, but the droplets would be pinned when the shape-memory graphene film rebounded due to electrical stimulation, which caused the penetration of the infused lubricant into the pores and the exposure of rough topography film surfaces. The electrothermally dynamic tuning approach was stable and reversible; thus, the shape-memory graphene film was imparted with controlled slippery properties and functions that would be amenable to a variety of applications, such as liquid handling for microplates.
| S-EPMC5457146 | biostudies-literature
Project description:A series of phosphorus-functionalized porous organic polymers supported palladium catalysts with tunable surface wettability were successfully prepared using an easy copolymerization and successive immobilization method. The obtained polymers were carefully characterized by many physicochemical methods. Characterization results suggested that the prepared materials featured hierarchically porous structures, high pore volumes, tunable surface wettability and strong electron-donating ability towards palladium species. We demonstrated the use of these solid catalysts for water-mediated Suzuki-Miyaura coupling reactions. It was found that the surface wettability of the prepared catalysts has an important influence on their catalytic activities. The optimal catalyst, which has excellent amphipathicity and relatively high phosphorus concentration, displayed superior catalytic activity compared to the other catalysts. Under ambient conditions, a variety of aryl chlorides can be efficiently transformed to biaryls in high yields. Moreover, the catalyst could be easily recovered and reused at least six times.
| S-EPMC9075338 | biostudies-literature
Project description:Facile fabrication of well-intergrown, oriented zeolite membranes with tunable chemical properties on commercially proven substrates is crucial to broadening their applications for separation and catalysis. Rationally determined electrostatic adsorption can enable the direct attachment of a b-oriented silicalite-1 monolayer on a commercial porous ceramic substrate. Homoepitaxially oriented, well-intergrown zeolite ZSM-5 membranes with a tunable composition of Si/Al=25-∞ were obtained by secondary growth of the monolayer. Intercrystallite defects can be eliminated by using Na+ as the mineralizer to promote lateral crystal growth and suppress surface nucleation in the direction of the straight channels, as evidenced by atomic force microscopy measurements. Water permeation testing shows tunable wettability from hydrophobic to highly hydrophilic, giving the potential for a wide range of applications.
| S-EPMC6391953 | biostudies-literature
Project description:The spontaneous gelation of poly(4-vinyl pyridine)/pyridine solution produces materials with conductive properties that are suitable for various energy conversion technologies. The gel is a thermoelectric material with a conductivity of 2.2-5.0 × 10-6 S m-1 and dielectric constant ε = 11.3. On the molecular scale, the gel contains various types of hydrogen bonding, which are formed via self-protonation of the pyridine side chains. Our measurements and calculations revealed that the gelation process produces bias-dependent polymer complexes: quasi-symmetric, strongly hydrogen-bonded species, and weakly bound protonated structures. Under an applied DC bias, the gelled complexes differ in their capacitance/conductive characteristics. In this work, we exploited the bias-responsive characteristics of poly(4-vinyl pyridine) gelled complexes to develop a prototype of a thermal energy harvesting device. The measured device efficiency is S = ΔV/ΔT = 0.18 mV/K within the temperature range of 296-360 K. Investigation of the mechanism underlying the conversion of thermal energy into electric charge showed that the heat-controlled proton diffusion (the Soret effect) produces thermogalvanic redox reactions of hydrogen ions on the anode. The charge can be stored in an external capacitor for heat energy harvesting. These results advance our understanding of the molecular mechanisms underlying thermal energy conversion in the poly(4-vinyl pyridine)/pyridine gel. A device prototype, enabling thermal energy harvesting, successfully demonstrates a simple path toward the development of inexpensive, low-energy thermoelectric generators.
| S-EPMC9798393 | biostudies-literature
Project description:Organic small-molecule semiconductors have higher carrier mobility compared to polymer semiconductors, while the actual performances of these materials are susceptible to morphological defects and misalignment of crystalline grains. Here, a new strategy is explored to control the crystallization and morphologies of a solution-processed organic small-molecule semiconductor 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) using soluble polymer films to control the wettability of substrates. Different from the traditional surface modification method, the polymer layer as a modification layer is soluble in the semiconductor solution during the fabrication of organic thin-film transistors (OTFTs). The dissolved polymer alters the state of the semiconductor solution, which in turn, changes the crystallographic morphologies of the semiconductor films. By controlling the solubility and thickness of the polymer modification layers, it is possible to regulate the grain boundary and domain size of C8-BTBT films, which determine the performances of OTFTs. The bottom-gate transistors modified by a thick PS layer exhibit a mobility of >7 cm2/V·s and an on/off ratio of >107. It is expected that this new modification method will be applicable to high-performance OTFTs based on other small molecular semiconductors and dielectrics.
| S-EPMC7241009 | biostudies-literature
Project description:The fabrication of
| S-EPMC9578110 | biostudies-literature
Project description:Cross-linked polymers containing β-cyclodextrin (β-CD) are promising adsorbents with demonstrated removal performances for per- and polyfluoroalkyl substances (PFASs) from contaminated water sources. Despite the promising performance of some β-CD-based adsorbents for PFAS removal, many of these materials are not amenable for rational performance improvement or addressing fundamental questions about the PFAS adsorption mechanisms. These ambiguities arise from the poorly defined structure of the cross-linked polymers, especially with respect to the random substitution patterns of the cyclodextrins as well as side reactions that modify the structures of some cross-linkers. Here, we report a new β-CD polymer platform in which styrene groups are covalently attached to β-CD to form a discrete monomer that is amenable to radical polymerization. This monomer was polymerized with styrene and methacrylate comonomers to provide three β-CD polymers with high specific surface areas and high isolated yields (all >93%). A β-CD polymer copolymerized with a methacrylate bearing a cationic functional group achieved nearly 100% removal for eight anionic PFASs (initial concentration of 1 μg/L for each compound) in nanopure water at an exceedingly low adsorbent loading of 1 mg L-1, as compared to previous cyclodextrin polymers that required loadings at least 1 order of magnitude higher to achieve an equivalent degree of PFAS removal. Furthermore, when the adsorbents were studied in a challenging salt matrix, we observed that long-chain PFAS adsorption was controlled by a complementary interplay of hydrophobic and electrostatic interactions, whereas short-chain PFASs primarily relied on electrostatic interactions. This approach demonstrates great promise for anionic PFAS removal, and we anticipate that new compositions will be tailored using the versatility of radical polymerization to simultaneously target PFASs and other classes of micropollutants in the future.
| S-EPMC9136966 | biostudies-literature
Project description:Scientific and technological advances in transparent conductive electrodes improve the heating performance of flexible transparent film heaters (TFHs), which can be utilized for various applications as defrosters and heaters. To achieve high performance as well as practical TFHs, several conditions, such as high optical transmittance, low electrical resistance, heating uniformity, and operational stability in various environmental conditions should be satisfied. However, due to the trade-offs between optical transmittance and electrical resistance, it is not easy to fulfill all the requirements concurrently. Here we report flexible TFHs using a ternary composite of silver nanowire (AgNW), conducting polymer (i.e., poly[3,4-ethylenedioxythiophene]:polystyrene sulfonate [PEDOT:PSS]), and a thin conductive oxide (i.e., indium tin oxide [ITO]) layer, exhibiting higher performance in terms of the maximum heating temperature (>110 °C), operational stability, mechanical flexibility, and optical transmittance (95% at 550 nm), compared to pristine AgNW-based TFHs. We also demonstrated the stable operation of the AgNW-PEDOT:PSS/ITO TFHs soaked in water, showing excellent environmental stability. To analyse the fundamental mechanisms for the improved performance of the AgNW-PEDOT:PSS/ITO TFHs, we investigated the progress of joule heating using a device simulator, and found that the improvement originated not only from reduced electrical resistance but also from enhanced heat dissipation with PEDOT:PSS and ITO. We anticipate that our analysis and results will be helpful for further development of practical flexible TFHs.
| S-EPMC9060799 | biostudies-literature
Project description:Despite efforts to mature human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) for disease modeling and high throughput screening, cells remain immature and may not reflect adult biology. Recent advancements utilize electro-mechanical and paracrine stimulation to functionally mature cardiomyocytes, but the resulting engineered constructs continue to lack a microenvironment conducive to electrical signal propagation and maturity. Conductive polymers are attractive candidates to facilitate electrical communication between gaps in sparse hPSC-CM clusters or between hPSC-CMs to repair conduction defects. To create a conductive polymer platform for improved electrical signal propagation between hPSC-CMs and achieve electrical maturity, we electrospun poly(3,4-ethylendioxythiophene):polystyrene sulfonate (PEDOT:PSS) blended with 8% (w/v) poly(vinyl alcohol) (PVA). Matrix fiber structure remained stable over 4 weeks in buffer, stiffness remains near cardiac stiffness in vivo, and electrical conductivity scaled with PEDOT:PSS concentration. When fibroblasts were added to fibers, cells had higher initial attachment to PEDOT:PSS compared to PVA-only scaffolds, and after 5 days, over 90% of fibroblasts remained viable on PEDOT:PSS scaffolds compared to PVA-only scaffolds. Electrically excitable hPSC-CMs cultured on conductive substrates exhibited an upregulation of cardiac and muscle-related genes as opposed to non-conductive substrates. These cells further displayed increased desmoplakin (DP) localization on conductive scaffolds, indicating an improvement in the mechanical stability of our hPSC-CMs. Sarcomere organization also scaled with increasing PEDOT:PSS concentration, even in sub-monolayer cell densities, suggesting that improved organization of the contractile machinery in these cells was due to the electrical condition of the matrix. Calcium handling indicated higher calcium flux with a shorter time to peak, further suggesting improved electrical maturity, even when sub-confluent. Taken together, these data suggest that PEDOT:PSS/PVA scaffolds are stable, of a stiffness relevant to cardiomyocytes, and supportive of electrical coupling even in the absence of a monolayer, which may improve cardiac disease modeling and drug development.
2023-12-13 | GSE226541 | GEO
Project description:Poly(chloro-p-xylylene) (PPXC) film has a water contact angle (WCA) of only about 84°. It is necessary to improve its hydrophobicity to prevent liquid water droplets from corroding or electrically shorting metallic circuits of semiconductor devices, sensors, microelectronics, and so on. Herein, we reported a facile approach to improve its surface hydrophobicity by varying surface pattern structures under different temperature and relative humidity (RH) conditions on a thermal curable polydimethylsiloxane (PDMS) and hydrophobic silica (SiO?) nanoparticle coating. Three distinct large-scale surface patterns were obtained mainly depending on the contents of SiO? nanoparticles. The regularity of patterns was mainly controlled by the temperature and RH conditions. By changing the pattern structures, the surface wettability of PPXC film could be improved and its WCA was increased from 84° to 168°, displaying a superhydrophobic state. Meanwhile, it could be observed that water droplets on PPXC film with superhydrophobicity were transited from a "Wenzel" state to a "Cassie" state. The PPXC film with different surface patterns of 200 ?m × 200 ?m and the improved surface hydrophobicity showed wide application potentials in self-cleaning, electronic engineering, micro-contact printing, cell biology, and tissue engineering.
| S-EPMC5951332 | biostudies-literature