Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Constrained Sintering in Fabrication of Solid Oxide Fuel Cells.

ABSTRACT: Solid oxide fuel cells (SOFCs) are inevitably affected by the tensile stress field imposed by the rigid substrate during constrained sintering, which strongly affects microstructural evolution and flaw generation in the fabrication process and subsequent operation. In the case of sintering a composite cathode, one component acts as a continuous matrix phase while the other acts as a dispersed phase depending upon the initial composition and packing structure. The clustering of dispersed particles in the matrix has significant effects on the final microstructure, and strong rigidity of the clusters covering the entire cathode volume is desirable to obtain stable pore structure. The local constraints developed around the dispersed particles and their clusters effectively suppress generation of major process flaws, and microstructural features such as triple phase boundary and porosity could be readily controlled by adjusting the content and size of the dispersed particles. However, in the fabrication of the dense electrolyte layer via the chemical solution deposition route using slow-sintering nanoparticles dispersed in a sol matrix, the rigidity of the cluster should be minimized for the fine matrix to continuously densify, and special care should be taken in selecting the size of the dispersed particles to optimize the thermodynamic stability criteria of the grain size and film thickness. The principles of constrained sintering presented in this paper could be used as basic guidelines for realizing the ideal microstructure of SOFCs.

SUBMITTER: Lee HW

PROVIDER: S-EPMC5510732 | biostudies-other | 2016 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

In situ fabrication of high-performance Ni-GDC-nanocube core-shell anode for low-temperature solid-oxide fuel cells.

Project description:A core-shell anode consisting of nickel-gadolinium-doped-ceria (Ni-GDC) nanocubes was directly fabricated by a chemical process in a solution containing a nickel source and GDC nanocubes covered with highly reactive {001} facets. The cermet anode effectively generated a Ni metal framework even at 500?°C with the growth of the Ni spheres. Anode fabrication at such a low temperature without any sintering could insert a finely nanostructured layer close to the interface between the electrolyte and the anode. The maximum power density of the attractive anode was 97?mW?cm(-2), which is higher than that of a conventional NiO-GDC anode prepared by an aerosol process at 55?mW?cm(-2) and 600?°C, followed by sintering at 1300?°C. Furthermore, the macro- and microstructure of the Ni-GDC-nanocube anode were preserved before and after the power-generation test at 700?°C. Especially, the reactive {001} facets were stabled even after generation test, which served to reduce the activation energy for fuel oxidation successfully.

| S-EPMC4663492 | biostudies-literature

Development of Ni-Sr(V,Ti)O3-δ Fuel Electrodes for Solid Oxide Fuel Cells.

Project description:A series of strontium titanates-vanadates (STVN) with nominal cation composition Sr1-xTi1-y-zVyNizO3-δ (x = 0-0.04, y = 0.20-0.40 and z = 0.02-0.12) were prepared by a solid-state reaction route in 10% H2-N2 atmosphere and characterized under reducing conditions as potential fuel electrode materials for solid oxide fuel cells. Detailed phase evolution studies using XRD and SEM/EDS demonstrated that firing at temperatures as high as 1200 °C is required to eliminate undesirable secondary phases. Under such conditions, nickel tends to segregate as a metallic phase and is unlikely to incorporate into the perovskite lattice. Ceramic samples sintered at 1500 °C exhibited temperature-activated electrical conductivity that showed a weak p(O2) dependence and increased with vanadium content, reaching a maximum of ~17 S/cm at 1000 °C. STVN ceramics showed moderate thermal expansion coefficients (12.5-14.3 ppm/K at 25-1100 °C) compatible with that of yttria-stabilized zirconia (8YSZ). Porous STVN electrodes on 8YSZ solid electrolytes were fabricated at 1100 °C and studied using electrochemical impedance spectroscopy at 700-900 °C in an atmosphere of diluted humidified H2 under zero DC conditions. As-prepared STVN electrodes demonstrated comparatively poor electrochemical performance, which was attributed to insufficient intrinsic electrocatalytic activity and agglomeration of metallic nickel during the high-temperature synthetic procedure. Incorporation of an oxygen-ion-conducting Ce0.9Gd0.1O2-δ phase (20-30 wt.%) and nano-sized Ni as electrocatalyst (≥1 wt.%) into the porous electrode structure via infiltration resulted in a substantial improvement in electrochemical activity and reduction of electrode polarization resistance by 6-8 times at 900 °C and ≥ one order of magnitude at 800 °C.

| S-EPMC8746223 | biostudies-literature

Europium-Doped Ceria Nanowires as Anode for Solid Oxide Fuel Cells.

Project description:CeO2-based materials have been studied intensively as anodes for intermediate temperature solid oxide fuel cells (IT-SOFCs). In this work, pristine and europium (Eu)-doped CeO2 nanowires were comprehensively investigated as anode materials for IT-SOFCs, by a combination of theoretical predictions and experimental characterizations. The results demonstrate: (1) Oxygen vacancies can be energetically favorably introduced into the CeO2 lattice by Eu doping; (2) The lattice parameter of the ceria increases linearly with the Eu content when it varies from 0 to 35 mol.%, simultaneously resulting in a significant increase in oxygen vacancies. The concentration of oxygen vacancies reaches its maximum at a ca. 10 mol.% Eu doping level and decreases thereafter; (3) The highest oxygen ion conductivity is achieved at a Eu content of 15 mol.%; while the 10 mol.% Eu-doped CeO2 sample displays the highest catalytic activity for H2-TPR and CO oxidization reactions. The conducting and catalytic properties benefit from the expanded lattice, the large amount of oxygen vacancies, the enhanced reactivity of surface oxygen and the promoted mobility of bulk oxygen ions. These results provide an avenue toward designing and optimizing CeO2 as a promising anode for SOFCs.

| S-EPMC7261932 | biostudies-literature

Route to High-Performance Micro-solid Oxide Fuel Cells on Metallic Substrates.

Project description:Micro-solid oxide fuel cells based on thin films have strong potential for use in portable power devices. However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures. Devices based on bulk metal substrates overcome these limitations, though performance is hindered by the challenge of growing state-of-the-art epitaxial materials on metals. Here, we demonstrate for the first time the growth of epitaxial cathode materials on metal substrates (stainless steel) commercially supplied with epitaxial electrolyte layers (1.5 μm (Y2O3)0.15(ZrO2)0.85 (YSZ) + 50 nm CeO2). We create epitaxial mesoporous cathodes of (La0.60Sr0.40)0.95Co0.20Fe0.80O3 (LSCF) on the substrate by growing LSCF/MgO vertically aligned nanocomposite films by pulsed laser deposition, followed by selectively etching out the MgO. To enable valid comparison with the literature, the cathodes are also grown on single-crystal substrates, confirming state-of-the-art performance with an area specific resistance of 100 Ω cm2 at 500 °C and activation energy down to 0.97 eV. The work marks an important step toward the commercialization of high-performance micro-solid oxide fuel cells for portable power applications.

| S-EPMC7844816 | biostudies-literature

Performance Analysis of Anode-Supported Solid Oxide Fuel Cells: A Machine Learning Approach.

Project description:Prior to the long-term utilization of solid oxide fuel cell (SOFC), one of the most remarkable electrochemical energy conversion devices, a variety of difficult experimental validation procedures is required, so it would be time-consuming and steep to predict the applicability of these devices in the future. For numerous years, extensive efforts have been made to develop mathematical models to predict the effects of various characteristics of solid oxide fuel cells (SOFCs) components on their performance (e.g., voltage). Taking advantage of the machine learning (ML) method, however, some issues caused by assumptions and calculation costs in mathematical modeling could be alleviated. This paper presents a machine learning approach to predict the anode-supported SOFCs performance as one of the most promising types of SOFCs based on architectural and operational variables. Accordingly, a dataset was collected from a study about the effects of cell parameters on the output voltage of a Ni-YSZ anode-supported cell. Convolutional machine learning models and multilayer perceptron neural networks were implemented to predict the current-voltage dependency. The resulting neural network model could properly predict, with more than 0.998 R2 score, a mean squared error of 9.6 × 10-5, and mean absolute error of 6 × 10-3 (V). Conventional models such as the Gaussian process as one of the most powerful models exhibits a prediction accuracy of 0.996 R2 score, 10-4 mean squared, and 6 × 10-3 (V) absolute error. The results showed that the built neural network could predict the effect of cell parameters on current-voltage dependency more accurately than previous mathematical and artificial neural network models. It is noteworthy that this procedure used in this study is general and can be easily applied to other materials datasets.

| S-EPMC9655730 | biostudies-literature

Fabrication of Lanthanum Strontium Manganite Ceramics via Agar Gel Casting and Solid State Sintering.

Project description:Fabricating lanthanum strontium manganite (LSM) ceramics with certain shapes is important for the design and construction of high-temperature energy conversion and storage devices. Here, we describe a low-cost and environmentally friendly method for fabricating LSM ceramics via agar gel casting and high temperature sintering. This new approach uses temperature tuning to fabricate LSM gel bodies, not only by manufacturing in the secondary process but also by remolding and recycling during the gel casting process. The effect of the sintering temperature on the properties of LSM ceramics was investigated as well. As a result, the porosity and compressive strength of LSM ceramics sintered at 1000 °C are ~60% and 5.6 MPa, respectively. When the sintering temperature increases to 1200 °C, the porosity decreases to ~28%, whereas the compressive strength increases to 25 MPa, which is able to meet the requirement of cathode-supported SOFCs (solid oxide fuel cells).

| S-EPMC6472146 | biostudies-literature

Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells.

Project description:The existing Ni-yttria-stabilized zirconia anodes in solid oxide fuel cells (SOFCs) perform poorly in carbon-containing fuels because of coking and deactivation at desired operating temperatures. Here we report a new anode with nanostructured barium oxide/nickel (BaO/Ni) interfaces for low-cost SOFCs, demonstrating high power density and stability in C(3)H(8), CO and gasified carbon fuels at 750°C. Synchrotron-based X-ray analyses and microscopy reveal that nanosized BaO islands grow on the Ni surface, creating numerous nanostructured BaO/Ni interfaces that readily adsorb water and facilitate water-mediated carbon removal reactions. Density functional theory calculations predict that the dissociated OH from H(2)O on BaO reacts with C on Ni near the BaO/Ni interface to produce CO and H species, which are then electrochemically oxidized at the triple-phase boundaries of the anode. This anode offers potential for ushering in a new generation of SOFCs for efficient, low-emission conversion of readily available fuels to electricity.

| S-EPMC3157151 | biostudies-literature

A micro-nano porous oxide hybrid for efficient oxygen reduction in reduced-temperature solid oxide fuel cells.

Project description:Tremendous efforts to develop high-efficiency reduced-temperature (≤ 600°C) solid oxide fuel cells are motivated by their potentials for reduced materials cost, less engineering challenge, and better performance durability. A key obstacle to such fuel cells arises from sluggish oxygen reduction reaction kinetics on the cathodes. Here we reported that an oxide hybrid, featuring a nanoporous Sm(0.5)Sr(0.5)CoO(3-δ) (SSC) catalyst coating bonded onto the internal surface of a high-porosity La(0.9)Sr(0.1)Ga(0.8)Mg(0.2)O(3-δ) (LSGM) backbone, exhibited superior catalytic activity for oxygen reduction reactions and thereby yielded low interfacial resistances in air, e.g., 0.021 Ω cm(2) at 650°C and 0.043 Ω cm(2) at 600°C. We further demonstrated that such a micro-nano porous hybrid, adopted as the cathode in a thin LSGM electrolyte fuel cell, produced impressive power densities of 2.02 W cm(-2) at 650°C and 1.46 W cm(-2) at 600°C when operated on humidified hydrogen fuel and air oxidant.

| S-EPMC3375499 | biostudies-literature

Rapid and Low-Energy Fabrication of Symmetrical Solid Oxide Cells by Microwave Methods.

Project description:Solid oxide fuel cells are highly efficient, low-emission, and fuel-flexible energy conversion devices that can also run in reverse as solid oxide electrolysis cells, converting CO2 and/or H2O to useful fuels and pure O2. Our team has recently developed a highly promising mixed conducting oxide catalyst (La0.3Ca0.7Fe0.7Cr0.3O3-δ) that can be used at both the anode and cathode in either the fuel cell or electrolysis mode in a lower-cost symmetrical cell. However, there is still a need to improve material processing and cell manufacturing methods in this field. Here, we report, for the first time, fabrication of a symmetrical solid oxide cell, based on our very promising catalysts, using rapid, low-cost, low-energy, and green microwave (MW) processing techniques. These cells were fabricated with MW-sintered powders and were then MW-sintered without the use of any MW susceptors inside the electrode layers or any additional presintering steps. The catalyst layers show very stable nanostructures and do not delaminate, and the cells exhibit reaction rates that are similar to those obtained using normal ceramic processing methods. Importantly, the powder preparation and cell sintering steps, carried out using MW methods, require only ca. 1/3 and 1/9 of the time/energy, respectively, versus those required in traditional furnace methods, thus translating to significant cost savings.

| S-EPMC6641171 | biostudies-literature

Enhanced Oxygen Electrocatalysis in Heterostructured Ceria Electrolytes for Intermediate-Temperature Solid Oxide Fuel Cells.

Project description:Heterostructured composite ceria electrolytes have been shown to accelerate the oxygen reduction activity and provide a new approach to improve solid oxide fuel cell (SOFC) performance. In this study, barium carbonate was added to gadolinium-doped ceria, Gd0.2Ce0.8O2-δ (GDC) electrolyte to improve the electrochemical performance of intermediate-temperature SOFCs. The heterostructured electrolyte was formed by the addition of 5 wt % BaCO3 to a GDC electrolyte, resulting in a reaction during sintering that formed well-dispersed BaCe0.8Gd0.2O3-δ (BCG) throughout the electrolyte. The resulting material was tested as an electrolyte using La0.6Sr0.4Co0.2Fe0.8O3-δ as a cathode, resulting in a dramatic reduction to the polarization resistance of more than half the value (600 and 700 °C, the resistance was reduced from 2.49 and 0.23 Ω cm2 to 1.21 and 0.12 Ω cm2) obtained by using pure GDC as an electrolyte. Furthermore, full cell SOFC tests employing the heterostructured electrolyte conducted during overextended durations indicated that the BCG phase in the 5BCG-GDC electrolyte was stable in an air atmosphere with no observed reactions with residual CO2. This approach of tailoring surface reactivity by tailoring the composition and structure of the electrolyte as opposed to electrode materials provides an alternative method to improve fuel cell performance.

| S-EPMC6644590 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data