Drop-Weight Impact Test on U-Shape Concrete Specimens with Statistical and Regression Analyses.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhu XC
PROVIDER: S-EPMC5512661 | biostudies-other | 2015 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In this paper, the impact energy potential of hybrid fiber reinforced concrete (HFRC) was explored with different fiber mixes manufactured for comparative analyses of hybridization. The uniaxial compression and 3-point bending tests were conducted to determine the compressive strength and flexural strength. The experimental results imply that the steel fiber outperforms the polypropylene fiber and polyvinyl alcohol fiber in improving compressive and flexural strength. The sequent repeated drop weight impact tests for each mixture concrete specimens were performed to study the effect of hybrid fiber reinforcement on the impact energy. It is suggested that the steel fiber incorporation goes moderately ahead of the polypropylene or polyvinyl alcohol fiber reinforcement in terms of the impact energy improvement. Moreover, the impact toughness of steel-polypropylene hybrid fiber reinforced concrete as well as steel-polyvinyl alcohol hybrid fiber reinforced concrete was studied to relate failure and first crack strength by best fitting. The impact toughness is significantly improved due to the positive hybrid effect of steel fiber and polymer fiber incorporated in concrete. Finally, the hybrid effect index is introduced to quantitatively evaluate the hybrid fiber reinforcement effect on the impact energy improvement. When steel fiber content exceeds polyvinyl alcohol fiber content, the corresponding impact energy is found to be simply sum of steel fiber reinforced concrete and polyvinyl alcohol fiber reinforced concrete.
| S-EPMC6315794 | biostudies-literature
Project description:The impact and splash of liquid drops on solid substrates are ubiquitous in many important fields. However, previous studies have mainly focused on spherical drops while the non-spherical situations, such as raindrops, charged drops, oscillating drops, and drops affected by electromagnetic field, remain largely unexplored. Using ferrofluid, we realize various drop shapes and illustrate the fundamental role of shape in impact and splash. Experiments show that different drop shapes produce large variations in spreading dynamics, splash onset, and splash amount. However, underlying all these variations we discover universal mechanisms across various drop shapes: the impact dynamics is governed by the superellipse model, the splash onset is triggered by the Kelvin-Helmholtz instability, and the amount of splash is determined by the energy dissipation before liquid taking off. Our study generalizes the drop impact research beyond the spherical geometry, and reveals the potential of using drop shape to control impact and splash.
| S-EPMC8144391 | biostudies-literature
Project description:Patient-specific image-based computational fluid dynamics (CFD) is widely adopted in the cardiovascular research community to study hemodynamics, and will become increasingly important for personalized medicine. However, segmentation of the flow domain is not exact and geometric uncertainty can be expected which propagates through the computational model, leading to uncertainty in model output. Seventy-four aortic-valves were segmented from computed tomography images at peak systole. Statistical shape modeling was used to obtain an approximate parameterization of the original segmentations. This parameterization was used to train a meta-model that related the first five shape mode coefficients and flowrate to the CFD-computed transvalvular pressure-drop. Consequently, shape uncertainty in the order of 0.5 and 1.0 mm was emulated by introducing uncertainty in the shape mode coefficients. A global variance-based sensitivity analysis was performed to quantify output uncertainty and to determine relative importance of the shape modes. The first shape mode captured the opening/closing behavior of the valve and uncertainty in this mode coefficient accounted for more than 90% of the output variance. However, sensitivity to shape uncertainty is patient-specific, and the relative importance of the fourth shape mode coefficient tended to increase with increases in valvular area. These results show that geometric uncertainty in the order of image voxel size may lead to substantial uncertainty in CFD-computed transvalvular pressure-drops. Moreover, this illustrates that it is essential to assess the impact of geometric uncertainty on model output, and that this should be thoroughly quantified for applications that wish to use image-based CFD models.
| S-EPMC9286381 | biostudies-literature
Project description:Independent Component Analysis (ICA) is one of the most popular techniques for the analysis of resting state FMRI data because it has several advantageous properties when compared with other techniques. Most notably, in contrast to a conventional seed-based correlation analysis, it is model-free and multivariate, thus switching the focus from evaluating the functional connectivity of single brain regions identified a priori to evaluating brain connectivity in terms of all brain resting state networks (RSNs) that simultaneously engage in oscillatory activity. Furthermore, typical seed-based analysis characterizes RSNs in terms of spatially distributed patterns of correlation (typically by means of simple Pearson's coefficients) and thereby confounds together amplitude information of oscillatory activity and noise. ICA and other regression techniques, on the other hand, retain magnitude information and therefore can be sensitive to both changes in the spatially distributed nature of correlations (differences in the spatial pattern or "shape") as well as the amplitude of the network activity. Furthermore, motion can mimic amplitude effects so it is crucial to use a technique that retains such information to ensure that connectivity differences are accurately localized. In this work, we investigate the dual regression approach that is frequently applied with group ICA to assess group differences in resting state functional connectivity of brain networks. We show how ignoring amplitude effects and how excessive motion corrupts connectivity maps and results in spurious connectivity differences. We also show how to implement the dual regression to retain amplitude information and how to use dual regression outputs to identify potential motion effects. Two key findings are that using a technique that retains magnitude information, e.g., dual regression, and using strict motion criteria are crucial for controlling both network amplitude and motion-related amplitude effects, respectively, in resting state connectivity analyses. We illustrate these concepts using realistic simulated resting state FMRI data and in vivo data acquired in healthy subjects and patients with bipolar disorder and schizophrenia.
| S-EPMC5346569 | biostudies-literature
Project description:Hydrodynamic collapse of a central air-cavity during the recoil phase of droplet impact on a superhydrophobic sieve leads to satellite-free generation of a single droplet through the sieve. Two modes of cavity formation and droplet ejection have been observed and explained. The volume of the generated droplet scales with the pore size. Based on this phenomenon, we propose a drop-on-demand printing technique. Despite significant advancements in inkjet technology, enhancement in mass-loading and particle-size have been limited due to clogging of the printhead nozzle. By replacing the nozzle with a sieve, we demonstrate printing of nanoparticle suspension with 71% mass-loading. Comparatively large particles of 20 μm diameter are dispensed in droplets of ~80 μm diameter. Printing is performed for surface tension as low as 32 mNm-1 and viscosity as high as 33 mPa∙s. In comparison to existing techniques, this way of printing is widely accessible as it is significantly simple and economical.
| S-EPMC7455714 | biostudies-literature
Project description:BackgroundAdvances in medical imaging, segmentation techniques, and high performance computing have stimulated the use of complex, patient-specific, three-dimensional Computational Fluid Dynamics (CFD) simulations. Patient-specific, CFD-compatible geometries of the aortic valve are readily obtained. CFD can then be used to obtain the patient-specific pressure-flow relationship of the aortic valve. However, such CFD simulations are computationally expensive, and real-time alternatives are desired.AimThe aim of this work is to evaluate the performance of a meta-model with respect to high-fidelity, three-dimensional CFD simulations of the aortic valve.MethodsPrincipal component analysis was used to build a statistical shape model (SSM) from a population of 74 iso-topological meshes of the aortic valve. Synthetic meshes were created with the SSM, and steady-state CFD simulations at flow-rates between 50 and 650 mL/s were performed to build a meta-model. The meta-model related the statistical shape variance, and flow-rate to the pressure-drop.ResultsEven though the first three shape modes account for only 46% of shape variance, the features relevant for the pressure-drop seem to be captured. The three-mode shape-model approximates the pressure-drop with an average error of 8.8% to 10.6% for aortic valves with a geometric orifice area below 150 mm2 . The proposed methodology was least accurate for aortic valve areas above 150 mm2 . Further reduction to a meta-model introduces an additional 3% error.ConclusionsStatistical shape modeling can be used to capture shape variation of the aortic valve. Meta-models trained by SSM-based CFD simulations can provide an estimate of the pressure-flow relationship in real-time.
| S-EPMC7583374 | biostudies-literature
Project description:Masonry structures are widely used nowadays for their advantages like low-cost workmanship, efficiency and fast construction techniques. The compressive strength of the materials that compose masonry (block and mortar) is very important to the behavior of the system, but the tensile strength is even more significant for the standards and building codes. In this work, a dataset for indirect tensile tests of hollow concrete blocks is obtained. Splitting tests as described in ASTM C-1006-13 are applied. Two sets of blocks were tested, one with medium compressive strength and the other with high compressive strength. The first set was tested in three directions named A, B, and C; the second one was tested in two directions, A and B. The data was collected with a servo-hydraulic machine. The data is presented in tables and can be used by material researchers, as well as in numerical modeling.
| S-EPMC8645457 | biostudies-literature
Project description:This paper studies the statistical correlation in mechanical characteristics of class F fly ash based geopolymer concrete (CFGPC). Experimentally measured values of the compressive strength, elastic modulus and indirect tensile strength of CFGPC specimens made from class F fly ash (CFA) were presented and analyzed. The results were compared with those of corresponding ordinary Portland cement concrete (OPCC) using statistical hypothesis tests. Results illustrated that when possessing similar compressive and tensile strength, the elastic modulus for CFGPC is significantly lower than that of OPCC. The corresponding expressions recommended by standards for the case of OPCC is proved to be inaccurate when applied in the case of CFGPC. Statistical regression was used to identify tendencies and correlations within the mechanical characteristics of CFGPC, as well as the empirical equations for predicting tensile strength and elastic modulus of CFGPC from its compressive strength values. In conclusion, CFGPC and OPCC has significant differences in terms of the correlations between mechanical properties. The empirical equations obtained in this study could provide relatively accurate predictions on the mechanical behavior of CFGPC.
| S-EPMC7178337 | biostudies-literature
Project description:This SuperSeries is composed of the SubSeries listed below.
2011-08-10 | GSE26736 | GEO
Project description:In this study, we tested the hypothesis that machine learning methods can accurately classify extant primates based on triquetrum shape data. We then used this classification tool to observe the affinities between extant primates and fossil hominoids. We assessed the discrimination accuracy for an unsupervised and supervised learning pipeline, i.e. with principal component analysis (PCA) and linear discriminant analysis (LDA) feature extraction, when tasked with the classification of extant primates. The trained algorithm is used to classify a sample of known fossil hominoids. For the visualization, PCA and uniform manifold approximation and projection (UMAP) are used. The results show that the discriminant function correctly classified the extant specimens with an F1-score of 0.90 for both PCA and LDA. In addition, the classification of fossil hominoids reflects taxonomy and locomotor behaviour reported in literature. This classification based on shape data using PCA and LDA is a powerful tool that can discriminate between the triquetrum shape of extant primates with high accuracy and quantitatively compare fossil and extant morphology. It can be used to support taxonomic differentiation and aid the further interpretation of fossil remains. Further testing is necessary by including other bones and more species and specimens per species extinct primates.
| S-EPMC10509576 | biostudies-literature