Tube-Super Dielectric Materials: Electrostatic Capacitors with Energy Density Greater than 200 J·cm-3.
Ontology highlight
ABSTRACT:
SUBMITTER: Cortes FJQ
PROVIDER: S-EPMC5512908 | biostudies-other | 2015 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Evidence is provided here that a class of materials with dielectric constants greater than 10⁵ at low frequency (<10-2 Hz), herein called super dielectric materials (SDM), can be generated readily from common, inexpensive materials. Specifically it is demonstrated that high surface area alumina powders, loaded to the incipient wetness point with a solution of boric acid dissolved in water, have dielectric constants, near 0 Hz, greater than 4 × 10⁸ in all cases, a remarkable increase over the best dielectric constants previously measured for energy storage capabilities, ca. 1 × 10⁴. It is postulated that any porous, electrically insulating material (e.g., high surface area powders of silica, titania, etc.), filled with a liquid containing a high concentration of ionic species will potentially be an SDM. Capacitors created with the first generated SDM dielectrics (alumina with boric acid solution), herein called New Paradigm Super (NPS) capacitors display typical electrostatic capacitive behavior, such as increasing capacitance with decreasing thickness, and can be cycled, but are limited to a maximum effective operating voltage of about 0.8 V. A simple theory is presented: Water containing relatively high concentrations of dissolved ions saturates all, or virtually all, the pores (average diameter 500 Å) of the alumina. In an applied field the positive ionic species migrate to the cathode end, and the negative ions to the anode end of each drop. This creates giant dipoles with high charge, hence leading to high dielectric constant behavior. At about 0.8 V, water begins to break down, creating enough ionic species to "short" the individual water droplets. Potentially NPS capacitor stacks can surpass "supercapacitors" in volumetric energy density.
| S-EPMC5456448 | biostudies-other
Project description:There have been numerous reports on discovery of giant dielectric permittivity materials called internal barrier layer capacitor in the recent years. We took particular note of one of such materials, i.e., BaTiO3 with SiO2 coating. It shows expressions of giant electric permittivity when processed by spark plasma sintering. So we evaluated various electrical characteristics of this material to find out whether it is applicable to multilayer ceramic capacitors. Our evaluation revealed that the isolated surface structure is the sole cause of expressions of giant dielectric permittivity.
| S-EPMC3585747 | biostudies-other
Project description:With an ever increasing dependence on electrical energy for powering modern equipment and electronics, research is focused on the development of efficient methods for the generation, storage and distribution of electrical power. In this regard, the development of suitable dielectric based solid-state capacitors will play a key role in revolutionizing modern day electronic and electrical devices. Among the popular dielectric materials, anti-ferroelectrics (AFE) display evidence of being a strong contender for future ceramic capacitors. AFE materials possess low dielectric loss, low coercive field, low remnant polarization, high energy density, high material efficiency, and fast discharge rates; all of these characteristics makes AFE materials a lucrative research direction. However, despite the evident advantages, there have only been limited attempts to develop this area. This article attempts to provide a focus to this area by presenting a timely review on the topic, on the relevant scientific advancements that have been made with respect to utilization and development of anti-ferroelectric materials for electric energy storage applications. The article begins with a general introduction discussing the need for high energy density capacitors, the present solutions being used to address this problem, and a brief discussion of various advantages of anti-ferroelectric materials for high energy storage applications. This is followed by a general description of anti-ferroelectricity and important anti-ferroelectric materials. The remainder of the paper is divided into two subsections, the first of which presents various physical routes for enhancing the energy storage density while the latter section describes chemical routes for enhanced storage density. This is followed by conclusions and future prospects and challenges which need to be addressed in this particular field.
| S-EPMC5458845 | biostudies-other
Project description:Materials exhibiting high energy/power density are currently needed to meet the growing demand of portable electronics, electric vehicles and large-scale energy storage devices. The highest energy densities are achieved for fuel cells, batteries, and supercapacitors, but conventional dielectric capacitors are receiving increased attention for pulsed power applications due to their high power density and their fast charge-discharge speed. The key to high energy density in dielectric capacitors is a large maximum but small remanent (zero in the case of linear dielectrics) polarization and a high electric breakdown strength. Polymer dielectric capacitors offer high power/energy density for applications at room temperature, but above 100 °C they are unreliable and suffer from dielectric breakdown. For high-temperature applications, therefore, dielectric ceramics are the only feasible alternative. Lead-based ceramics such as La-doped lead zirconate titanate exhibit good energy storage properties, but their toxicity raises concern over their use in consumer applications, where capacitors are exclusively lead free. Lead-free compositions with superior power density are thus required. In this paper, we introduce the fundamental principles of energy storage in dielectrics. We discuss key factors to improve energy storage properties such as the control of local structure, phase assemblage, dielectric layer thickness, microstructure, conductivity, and electrical homogeneity through the choice of base systems, dopants, and alloying additions, followed by a comprehensive review of the state-of-the-art. Finally, we comment on the future requirements for new materials in high power/energy density capacitor applications.
| S-EPMC8277101 | biostudies-literature
Project description:Calculations of electrostatic potential and solvation free energy of macromolecules are essential for understanding the mechanism of many biological processes. In the classical implicit solvent Poisson-Boltzmann (PB) model, the macromolecule and water are modeled as two-dielectric media with a sharp border. However, the dielectric property of interior cavities and ion-channels is difficult to model realistically in a two-dielectric setting. In fact, the detection of water molecules in a protein cavity remains to be an experimental challenge. This introduces an uncertainty, which affects the subsequent solvation free energy calculation. In order to compensate this uncertainty, a novel super-Gaussian dielectric PB model is introduced in this work, which devices an inhomogeneous dielectric distribution to represent the compactness of atoms and characterizes empty cavities via a gap dielectric value. Moreover, the minimal molecular surface level set function is adopted so that the dielectric profile remains to be smooth when the protein is transferred from water phase to vacuum. An important feature of this new model is that as the order of super-Gaussian function approaches the infinity, the dielectric distribution reduces to a piecewise constant of the two-dielectric model. Mathematically, an effective dielectric constant analysis is introduced in this work to benchmark the dielectric model and select optimal parameter values. Computationally, a pseudo-time alternative direction implicit (ADI) algorithm is utilized for solving the super-Gaussian PB equation, which is found to be unconditionally stable in a smooth dielectric setting. Solvation free energy calculation of a Kirkwood sphere and various proteins is carried out to validate the super-Gaussian model and ADI algorithm. One macromolecule with both water filled and empty cavities is employed to demonstrate how the cavity uncertainty in protein structure can be bypassed through dielectric modeling in biomolecular electrostatic analysis.
| S-EPMC9841320 | biostudies-literature
Project description:Large dielectric constants and small remanent polarization of the relaxor-ferroelectric (RFE) polymers are favored for energy-harvesting applications. Here, the energy harvesting of RFE thin films of vinylidene fluoride (VDF)-based terpolymers were re-evaluated. VDF-based terpolymers with trifluoroethylene (TrFE) and chlorofluoroethylene (CFE), CFE terpolymer, and those with TrFE and chlorotrifluoroethylene were used. Thermally annealed CFE terpolymer exhibited an energy density of 8.3 J cm-3 and an energy efficiency of 82% at a field of 280 MV m-1. The high-energy efficiency was related to the narrow bipolar hysteresis of displacement (D)-electric field (E) of the CFE terpolymer film. This narrow D-E hysteresis was a sum of the unipolar hysteresis directed toward the positive electric field region and that toward the negative electric field region, which suggested antiferroelectric-like behavior.
| S-EPMC7711697 | biostudies-literature
Project description:This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al2O3/TiO2/HfO2 dielectric-film-based metal-insulator-metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al2O3-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm-2, desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10-10 A·cm-2, and quadratic voltage coefficient of 303.6 ppm·V-2. Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm-2 and 0.25 fF·µm-2. Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole-Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.
| S-EPMC9227371 | biostudies-literature
Project description:The rapid development of electronic devices with high integration levels, a light weight, and a multifunctional performance has fostered the design of novel polymer materials with low dielectric constants, which is crucial for the electronic packaging and encapsulation of these electronic components. Theoretical studies are more efficient and cost-effective for screening potential polymer materials with low dielectric constants than experimental investigations. In this study, we used a molecular density functional theory (DFT) approach combined with the B3LYP functional at the 6-31+G(d, p) basis set to validate the feasibility of predicting static dielectric constants of the polymer materials. First, we assessed the influence of the basis sets on the polarizability. Furthermore, the changes of polarizability, polarizability per monomer unit, and differences in polarizability between the consecutive polymer chains as a function of the number of monomers were summarized and discussed. We outlined a similar behavior for the volume of the polymers as well. Finally, we simulated dielectric constants of three typical polymer materials, polyethylene (PE), polytetrafluoroethylene (PTFE), and polystyrene (PS), by combining with the Clausius-Mossotti equation. The simulated results showed excellent agreement with experimental data from the literature, suggesting that this theoretical DFT method has great potential for the molecular design and development of novel polymer materials with low dielectric constants.
| S-EPMC7830834 | biostudies-literature
Project description:In this manuscript, a dramatic increase in the energy density of ~ 69?Wh kg?¹ and an extraordinary cycleability ~ 2000 cycles of the Li-ion hybrid electrochemical capacitors (Li-HEC) is achieved by employing tailored activated carbon (AC) of ~ 60% mesoporosity derived from coconut shells (CS). The AC is obtained by both physical and chemical hydrothermal carbonization activation process, and compared to the commercial AC powders (CAC) in terms of the supercapacitance performance in single electrode configuration vs. Li. The Li-HEC is fabricated with commercially available Li?Ti?O?? anode and the coconut shell derived AC as cathode in non-aqueous medium. The present research provides a new routine for the development of high energy density Li-HEC that employs a mesoporous carbonaceous electrode derived from bio-mass precursors.
| S-EPMC3801125 | biostudies-literature
Project description:Poly(vinylidene fluoride)-based dielectric materials are prospective candidates for high power density electric storage applications because of their ferroelectric nature, high dielectric breakdown strength and superior processability. However, obtaining a polar phase with relaxor-like behavior in poly(vinylidene fluoride), as required for high energy storage density, is a major challenge. To date, this has been achieved using complex and expensive synthesis of copolymers and terpolymers or via irradiation with high-energy electron-beam or γ-ray radiations. Herein, a facile process of pressing-and-folding is proposed to produce β-poly(vinylidene fluoride) (β-phase content: ~98%) with relaxor-like behavior observed in poly(vinylidene fluoride) with high molecular weight > 534 kg mol-1, without the need of any hazardous gases, solvents, electrical or chemical treatments. An ultra-high energy density (35 J cm-3) with a high efficiency (74%) is achieved in a pressed-and-folded poly(vinylidene fluoride) (670-700 kg mol-1), which is higher than that of other reported polymer-based dielectric capacitors to the best of our knowledge.
| S-EPMC6800420 | biostudies-literature