Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cone Beam Computed Tomography Study of Root Canal Morphology of Permanent Mandibular Incisors in Indian Subpopulation.

ABSTRACT: The aim of the study was to determine the root canal morphology of permanent mandibular incisor teeth in the Indian subpopulation with the use of cone beam computed tomography (CBCT).CBCT images of 200 patients with 800 permanent mandibular incisors, fulfilling necessary inclusion criteria and aged 18 to 60 years were evaluated. The number of roots, number of root canals and canal configuration were investigated and then classified according to Vertucci's classification of root canals. The effect of gender on the incidence of root canal morphology was also investigated.All the permanent mandibular incisors had a single root. The majority of mandibular incisors (66.5%) had a single root with a single canal. The prevalence of second canals was as follows: right central incisor - 33.5%, left central incisor - 30%, right lateral incisors - 33.5% and left lateral incisor - 36.5%. According to gender, 15.2% of men and 20.4% of women had a second root canal. Type 1 Vertucci configuration was most prevalent, followed by type 3, type 2, type 5 and type 4 in that order.Type 1 Vertucci's classification (64.5%) was the most prevalent canal configuration in the mandibular anterior teeth in the Indian population. Type 5 Vertucci's classification was the most frequently observed canal configuration of the two-canalled teeth. CBCT is an excellent imaging modality for detection of different canal configurations of mandibular incisors.

SUBMITTER: Verma GR

PROVIDER: S-EPMC5513681 | biostudies-other | 2017

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Root Canal Anatomy of Myanmar Permanent Mandibular Incisors in Mandalay Region

Project description:Introduction Incomplete understanding of the root canal system leads to endodontic failure. Missed canal was the fourth most common endodontic failure, which needed retreatment. There were a few studies on internal morphology of posterior teeth of Myanmar population. However, there was no report on root canal anatomy of anterior teeth. So, the aim of the in vitro study was to investigate root canal anatomy of Myanmar permanent mandibular incisors in Mandalay Region by the staining and clearing method. Materials and Methods A total of 96 teeth from the tertiary hospitals and one academic department in Mandalay Region were selected according to inclusion and exclusion criteria. Then, they were cleaned, drilled, stained with Indian ink, and decalcified with 5% nitric acid for 3 days. After that, they were dehydrated with ascending concentration of ethanol (80% overnight, 90% for 1 hour, and full strength for three hours). Finally, they were clarified with 98% methyl salicylate and investigated by calibrated observer in case of Vertucci's classification, allocation of apical foramen, and the detailed anatomy. Result Almost 70% of the teeth had type ? followed by 21.8% type ???, 4% 1-2-1-2-1 and type ??, and 1-3-2 and 2-3-1 comprised 1% each. Nearly 70% of apical foramen at central allocation of the root and 14% of detailed anatomy were seen in the sample teeth. Conclusion Most of the sampled Myanmar teeth comprised one canal and one foramen followed by type ???. However, unusual anatomies, such as 1-2-1-2-1, 1-3-2, and 2-3-1, were also seen. Contrastively, proportions of central location of apical foramen and of detailed anatomy were differed from the former reports. This study summarized that 3 in 10 mandibular incisors comprised the evidence of second or third canal configuration. Three types of intercanal calcifications, fusiform, islet, and bead, were additionally explored.

| S-EPMC7428882 | biostudies-literature

Root canal anatomy of human permanent mandibular incisors and mandibular canines: A systematic review.

Project description:Mandibular incisors and canines show variations in their root canal anatomy. It is imperative to be aware of these variations to lower the frequency of missed canals. The objective was to systematically review the existing studies to recognize the root and root canal anatomy of the mandibular incisors and canines among the population of various geographical locations, as studied by different methods. This systematic review was registered in the International Prospective Register of Systematic Reviews database under the number CRD42020185146. An exhaustive search was undertaken in three electronic databases - MEDLINE PubMed, EBSCOhost, and Google Scholar - along with hand-searching for the identification of studies. Studies were selected following strict inclusion and exclusion criteria. Selected studies were scored using the Joanna Briggs Institute Critical Appraisal tool for prevalence studies to determine the risk of bias. This review included data from 26 countries including the analysis of 71,404 mandibular anterior teeth. The risk of bias of all included studies was either low or moderate. Overall, it was seen that the percentage of second canals was higher in lateral than in central incisors. Mandibular canines occasionally showed the presence of two roots. Deviations in anatomy were high in the Middle Eastern European countries and the Indian subcontinent. Limitations are as follows: lack of homogeneity across data reported in the studies concerning the methods used to study the root canal anatomy. Diversities seen in the root canal configurations of mandibular incisors and canines vary according to ethnicity, and thus, one must have a thorough knowledge before commencing endodontic treatment.

| S-EPMC9274686 | biostudies-literature

Deep Learning Method for Mandibular Canal Segmentation in Dental Cone Beam Computed Tomography Volumes.

Project description:Accurate localisation of mandibular canals in lower jaws is important in dental implantology, in which the implant position and dimensions are currently determined manually from 3D CT images by medical experts to avoid damaging the mandibular nerve inside the canal. Here we present a deep learning system for automatic localisation of the mandibular canals by applying a fully convolutional neural network segmentation on clinically diverse dataset of 637 cone beam CT volumes, with mandibular canals being coarsely annotated by radiologists, and using a dataset of 15 volumes with accurate voxel-level mandibular canal annotations for model evaluation. We show that our deep learning model, trained on the coarsely annotated volumes, localises mandibular canals of the voxel-level annotated set, highly accurately with the mean curve distance and average symmetric surface distance being 0.56 mm and 0.45 mm, respectively. These unparalleled accurate results highlight that deep learning integrated into dental implantology workflow could significantly reduce manual labour in mandibular canal annotations.

| S-EPMC7125134 | biostudies-literature

Localization of the Mandibular Canal in a Turkish Population: a Retrospective Cone-Beam Computed Tomography Study.

Project description:Objectives:The aim of this study was to determine the location of the mandibular canal at the mental foramen region that is essential in order to prevent injuries to the inferior alveolar neurovascular bundle during mandibular surgical procedures. Material and Methods:The position of the mandibular canal was analysed using cone-beam computed tomography images from 300 Turkish patients, who were referred to Department of Oral and Maxillofacial Radiology, Faculty of Dentistry, Izmir Katip Celebi University for various complaints. The distances of the mandibular canal to the outer superior (D1), inferior (D2), buccal (D3), and lingual (D4) cortical margins were measured at 2 mm distal to the mental foramen. Results:There were 148 (49.3%) males and 152 (50.7%) females with ages ranging from 15 to 74 years (39.15 [SD 17.8]). D1 was significantly greater than D2 and D3 was significantly greater than D4 on both left and right sides. While the mean D1, D2, and D4 in males were significantly greater than in females on both left and right sides. There was no significant difference between D3 in males and females on both left and right sides. Conclusions:The results showed that the mandibular canal was vertically located nearer to the inferior cortical border and horizontally nearer to the lingual cortical border of the mandible at the mental foramen region. Knowledge of the distances of mandibular canal to the outer cortical margins at this region of the mandible will be helpful for surgical procedures.

| S-EPMC6683388 | biostudies-literature

Assessing the Prevalence and Morphological Characteristics of Bifid Mandibular Canal Using Cone-Beam Computed Tomography - A Retrospective Cross-Sectional Study.

Project description:Objectives:To evaluate the prevalence, location and configuration of bifid mandibular canals so as to avoid injury to the nerve and inadequate anesthesia during surgical procedures. Materials and Methods:CBCT scan of 203 patients (125 males and 78 females) was evaluated for the presence and the type of the bifid mandibular canal. They were classified according to Nortje et al. The prevalence rates were determined according to gender, location, and type of bifid mandibular canal. Statistical analysis was performed using IBM SPSS software version 24. Results:The prevalence rate of bifid mandibular canals was found to be 10.3% with 12.8% in males and 6.4% in females. The Chi-square test reveals there is a statistically significant difference between the different locations of bifid mandibular canals and most of the canals were present on the right side. The most frequent type of bifid mandibular canal observed was type II dental canal (38.1%), followed by type III forward canal (28.6%), type I retromolar canal (14.3%), and type IV buccolingual canal (14.3%). Conclusion:CBCT is suggested for a detailed evaluation and identification of bifid mandibular canals before any surgical procedures to avoid post-operative complications.

| S-EPMC7265462 | biostudies-literature

Assessment of the prevalence and configuration of middle distal canals in the mandibular molars in a Saudi subpopulation using Cone-Beam computed tomography.

Project description:PurposeThe prevalence of the middle distal (MD) canal in the mandibular molar is significantly low among countries including the USA, Spain, Turkey, and Jordan; however, analysis of its prevalence and configuration has not been performed in Saudi Arabia. Therefore, we aimed to assess the prevalence and configuration of the MD canal in Saudi Arabia.MethodsA retrospective analysis of 132 cone-beam computed tomography (CBCT) images was performed to evaluate the presence of the MD canal in patients visiting the Radiology Department of The College of Dentistry in King Saud University between July 2018 and July 2019. The canal was examined if it was confluent with the distobuccal (DB) or distolingual (DL) canals, fin, or independent. Moreover, the distances from the MD canal to the DL and DB canals and cementoenamel junction (CEJ) were recorded.ResultsOne MD canal (0.7%) was observed in 145 teeth. It was confluent with the DL canal. No statistical significance was observed among sex and age. The distances from the MD canal to the DL canal, DB canal, and CEJ were 1.4 mm, 1.9 mm, and 3.1 mm, respectively.ConclusionsThe prevalence of the MD canal was significantly low in a Saudi subpopulation (0.7%). Careful evaluation of CBCT images and the pulpal floor is significantly important to detect the MD canal to ensure a good prognosis.

| S-EPMC8864375 | biostudies-literature

Three-dimension model of root canal morphology of primary maxillary incisors by micro-computed tomography study.

Project description:The success of root canal treatment for deciduous teeth depends upon the shape of the root canal, among other factors. Despite this, there are limited reports on the use of high-resolution micro-CT to describe the root canal morphology of primary maxillary incisors. In this study, we aimed to create a three-dimensional (3D) digital model of the root canal morphology of primary maxillary incisors using microcomputed tomography (micro-CT). To provide a reference for the development of restorative posts for the primary maxillary incisors. Primary maxillary central and lateral incisors (n = 10 each) were analysed. Micro-computed tomography was used to conduct 3D analyses of the root canal system of the primary maxillary incisors. The canal volume and surface area of the primary maxillary central incisors were larger than those of the primary maxillary lateral incisors. The structural model index value was significantly lower in central incisors. At the cervical level and the interface between the cervical and middle one-third cross-sectional levels, the root canals of the primary maxillary lateral incisors were significantly rounder. The labio-palatal dimension and the diameters of the central incisors at the four different levels were significantly smaller than the diameter of the mesio-distal dimension. The taper of the central and lateral incisors gradually increased from the apical one-third to the cervical one-third in the labio-palatal dimension. The data obtained from the 3D analysis of maxillary incisors in this study will contribute to the design of root canal posts.

| S-EPMC10873741 | biostudies-literature

Automatic analysis algorithm for acquiring standard dental and mandibular shape data using cone-beam computed tomography.

Project description:This study aims to introduce a new algorithm developed using retrospective cone-beam computed tomography (CBCT) data to obtain a standard dental and mandibular arch shape automatically for an optimal panoramic focal trough. A custom-made program was developed to analyze each arch shape of randomly collected 30 CBCT images. First, volumetric data of the mandible were binarized and projected in the axial direction to obtain 2-dimensional arch images. Second, 30 patients' mandibular arches were superimposed on the center of the bilateral distal contact points of the mandibular canines to generate an average arch shape. Third, the center and boundary of a panoramic focal trough were obtained using smoothing splines. As a result, the minimum thickness and transition of the focal trough could be obtained. If this new algorithm is applied to big data of retrospective CBCT images, standard focal troughs could be established by race, sex, and age group, which would improve the image quality of dental panoramic radiography.

| S-EPMC6131388 | biostudies-literature

Mandibular Flexure and Its Significance: An In Vivo Cone Beam-Computed Tomography Proof-of-Concept Study.

Project description:The aim of this study was to assess intra-arch mandibular dimensional changes that may occur during mouth opening using cone beam-computed tomography (CBCT). Fifteen patients in need of any type of treatment whose execution considered a pre- and post-CBCT assessment consented and were enrolled. CBCTs were taken with the following settings: 90 kV, 8 mA, field of view (FOV) 140 by 100 mm (height and diameter), Voxel size 0.25 mm (high resolution). The pre-CBCT was executed in the maximum mandibular opening (MO), while the post-CBCT was in the maximum intercuspation (MI). A thermoplastic stent with radiopaque fiducial markers (steel ball bearings) was fabricated for each patient. Measurements were made using radiographic markers between contralateral canines and contralateral first molars and between ipsilateral canines and first molars on both sides. Paired t-tests were performed to evaluate the difference between open and closed positions on these four measurements. In the MO position were registered a significative tightening of the mandible at the canine (-0.49 mm, SD 0.54 mm; p < 0.001) and molar points (-0.81 mm, SD 0.63 mm; p < 0.001) and a significative shortening of the mandible on the right (-0.84 mm, SD 0.80 mm; p < 0.001) and left sides (-0.87 mm, SD 0.49 mm; p < 0.001). Within the study limitations, mandibular flexure determined a significant shortening and tightening between maximum intercuspation to maximum opening positions. Mandibular dimensional changes should be considered in light of other patient factors in the treatment planning of implant positioning and long-span complete arch implant-supported fixed prostheses in order to avoid technical complications.

| S-EPMC10299314 | biostudies-literature

Prevalence of middle mesial canal using cone beam computed tomography: A systematic review and meta-analysis.

Project description:BackgroundThe presence of middle mesial canals in mandibular molars are not commonly encountered in daily practice. However, locating and debriding such anatomical variation during the endodontic therapy is essential to avoid endodontic failure. The aim of this systematic review was to identify the overall prevalence of middle mesial canals (MMC) in mandibular molars using cone-beam computed tomography (CBCT), to assess the influence of different gender on the prevalence of MMCs in mandibular molars and to describe the MMC configurations.MethodsThe review protocol was registered in the PROSPERO database (CRD42021238523). The main electronic databases were searched until February 2022 for prevalence studies on root/canal anatomy in mandibular molars using CBCT imaging, in addition to hand-searched scientific articles in peer-reviewed journals and grey literature. The quality of the included studies was assessed using the Joanna Briggs Institute Critical Appraisal tool. Egger's and Begg's tests and Pearson's chi-square test were used for statistical analysis.ResultsFrom 523 records, 488 studies were excluded after screening the title and abstract. 35 relevant studies were included for full-text assessment and 28 studies were included in the meta-analysis. The overall prevalence of MMC out of the 19,256 teeth was 5.09% (95% CI: 2.894 to 7.784). The prevalence of MMC was 9.79% (95% CI: 4.296 to 17.224) in males and 13.96% (95% CI: 0.541 to 40.737) in females with a statistically significant difference of 4.16% (95% CI: 2.29 to 6.01). The most MMC configuration found in this review to be confluent with the mesiobuccal canal.ConclusionThe results showed an overall 5.09% prevalence of MMC in mandibular molars, with a significantly high prevalence in female subjects. Additionally, this canal was found to be confluent with the mesiobuccal canal.

| S-EPMC10724365 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data