Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rapid, chemical-free breaking of microfluidic emulsions with a hand-held antistatic gun.

ABSTRACT: Droplet microfluidics can form and process millions of picoliter droplets with speed and ease, allowing the execution of huge numbers of biological reactions for high-throughput studies. However, at the conclusion of most experiments, the emulsions must be broken to recover and analyze their contents. This is usually achieved with demulsifiers, like perfluorooctanol and chloroform, which can interfere with downstream reactions and harm cells. Here, we describe a simple approach to rapidly and efficiently break microfluidic emulsions, which requires no chemicals. Our method allows one-pot multi-step reactions, making it useful for large scale automated processing of reactions requiring demulsification. Using a hand-held antistatic gun, we pulse emulsions with the electric field, coalescing ∼100 μl of droplets in ∼10 s. We show that while emulsions broken with chemical demulsifiers exhibit potent PCR inhibition, the antistatic-broken emulsions amplify efficiently. The ability to break emulsions quickly without chemicals should make our approach valuable for most demulsification needs in microfluidics.

SUBMITTER: Karbaschi M

PROVIDER: S-EPMC5519397 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A hand-held, power-free microfluidic device for monodisperse droplet generation.

Project description:Here we develop a microfluidic device to generate monodispersion sub-nanoliter size droplets. Our system reaches steady state within 3?s after the flow starts and generates 100,000 droplets in 28?s with high size consistency (CV?<?8%). This low cost device is composed with a microfluidic chip, 2 tubings, a collection vial, a syringe and a station; and is in the size of an iPad Mini (4"?×?6"?×?3/4"). In this system, all incoming reagents share the same pressure drop across the fluidic passage to generator droplets. A single source negative pressure is applied to the fluids to create the flow by a vacuum at the exit end of the device. The vacuum is generated on-site by pulling the plunger of a syringe. The position of the plunger before and after pulling determines the degree of vacuum. A fixture is used to hold the plunger after it is pulled to maintain its vacuum. Although this system loses vacuum gradually as the liquid filling in, it maintains a flow rates with the changes less than 10% and droplet sizes changes less than 2% during the course of generating 150,000 droplets. The pressure drop across the chip, the flow rates of all reagents, the droplet size and generation frequency are predictable, programmable, and reproducible. This device is designed for generating droplets for single cell genome profiling application but can be also used for digital PCR or other droplet-based applications.

| S-EPMC6127847 | biostudies-other

?droPi: A Hand-Held Microfluidic Droplet Imager and Analyzer Built on Raspberry Pi.

Project description:We built a low-cost and hand-held device to image and analyze microfluidic droplets mainly for educational/teaching purposes in laboratory settings of universities. The device was assembled based on a Raspberry Pi with a camera attached on the back and an LCD screen on the top. We evaluated the performance of this device to capture images and videos to visualize high-throughput droplet generation in a microfluidic device. The qualities of imaging resolution and speed were sufficient for us to perform subsequent droplet analysis quantitatively through automatic image possessing. Droplet characteristics including droplet size, volume, and dispersity, as well as droplet intensity, have been measured, showing the potential of this device to analyze droplet-based assays. Most importantly, in addition to learning the knowledge and principles from classroom lectures, students can thus gain practice of using an advanced, state-of-the-art technology in a laboratory course. It will also open up opportunities to train students with skills of interdisciplinary thinking and learning.

| S-EPMC7263740 | biostudies-literature

A new hand-held microfluidic cytometer for evaluating irradiation damage by analysis of the damaged cells distribution.

Project description:Space radiation brings uneven damages to cells. The detection of the distribution of cell damage plays a very important role in radiation medicine and the related research. In this paper, a new hand-held microfluidic flow cytometer was developed to evaluate the degree of radiation damage of cells. The device we propose overcomes the shortcomings (e.g., large volume and high cost) of commercial flow cytometers and can evaluate the radiation damage of cells accurately and quickly with potential for onsite applications. The distribution of radiation-damaged cells is analyzed by a simultaneous detection of immunofluorescence intensity of ?-H2AX and resistance pulse sensor (RPS) signal. The ?-H2AX fluorescence intensity provides information of the degree of radiation damage in cells. The ratio of the number of cells with ?-H2AX fluorescence signals to the total numbers of cells detected by RPS indicates the percentage of the cells that are damaged by radiation. The comparison experiment between the developed hand-held microfluidic flow cytometer and a commercial confocal microscope indicates a consistent and comparable detection performance.

| S-EPMC4794725 | biostudies-literature

Breaking of Emulsions with Chemical Additives: Using Surrogate Fluids to Develop a Novel Theoretical Framework and Its Application to Water-in-Crude Oil Emulsions.

Project description:We investigate the role of adding a water-soluble surfactant (Tween 20) that acts as a demulsifier on the stability of water-in-dodecane emulsions stabilized with Span 80. Performing bottle test experiments, we monitor the emulsion separation process. Initially, water droplets sediment fast (∼10 min) until they become closely packed and form the so-called dense packed layer (DPL). The presence of the DPL, a long-lived metastable high-water-fraction (70-90%) emulsion separating bulk oil and water layers, slows down significantly the kinetics (∼105 min) of water separation. Once the DPL is formed, the ratio of the volume of separated water to the total water amount is called as water separation efficiency. We assume that the emulsion stability is reached when the coverage of the emulsifier surfactant exceeds 80% and use the ideal solution approximation. From that, we rationalize the water separation efficiency and the minimum demulsifier concentration required to maximize it, in terms of the mean droplet size, the surfactant concentrations, the total water volume fraction, and the adsorption strength of the water-soluble surfactant. Model predictions and experimental findings are in excellent agreement. We further test the validity and robustness of our theoretical model, by applying it successfully to data found in the literature on water-in-crude oil emulsion systems. Ultimately, our results prove that the efficiency of a demulsifier agent to break a W/O emulsion strongly correlates to its adsorption strength at the W/O interface, providing a novel contribution to the selection guidelines of chemical demulsifiers.

| S-EPMC8552343 | biostudies-literature

Volumetric Assessment of Pediatric Vascular Malformations Using a Rapid, Hand-Held Three-Dimensional Imaging System.

Project description:The effect of percutaneous, surgical, and medical therapies for vascular malformations (VMs) is often difficult to quantify volumetrically using cross-sectional imaging. Volumetric measurement is often estimated with serial, expensive MRI examinations which may require sedation or anesthesia. We aim to explore whether a portable 3D scanning device is capable of rapid, accurate volumetric analysis of pediatric VMs. Using an iPad-mounted infrared scanning device, 3D scans of patient faces, arms, and legs were acquired over an 8-month study period. Proprietary software was use to perform subsequent volumetric analysis. Of a total of 30 unilateral VMs involving either the face, arms, or legs, 26 (86.7%) VMs were correctly localized by discerning the larger volume of the affected side compared to the normal contralateral side. For patients with unilateral facial VMs (n = 10), volume discrepancy between normal and affected sides differed compared with normal controls (n = 19). This was true for both absolute (60 cc ± 55 vs 15 cc ± 8, p = 0.03) as well as relative (18.1% ± 13.2 vs 4.0% ± 2.1, p = 0.008) volume discrepancy. Following treatment, two patients experienced change in leg volume discrepancy ranging from - 17.3 to - 0.4%. Using a portable 3D scanning device, we were able to rapidly and noninvasively detect and quantify volume discrepancy resulting from VMs of the face, arms, and legs. Preliminary data suggests this technology can detect volume reduction of VMs in response to therapy.

| S-EPMC6456645 | biostudies-literature

First-in-human evaluation of a hand-held automated venipuncture device for rapid venous blood draws.

Project description:Obtaining venous access for blood sampling or intravenous (IV) fluid delivery is an essential first step in patient care. However, success rates rely heavily on clinician experience and patient physiology. Difficulties in obtaining venous access result in missed sticks and injury to patients, and typically require alternative access pathways and additional personnel that lengthen procedure times, thereby creating unnecessary costs to healthcare facilities. Here, we present the first-in-human assessment of an automated robotic venipuncture device designed to safely perform blood draws on peripheral forearm veins. The device combines ultrasound imaging and miniaturized robotics to identify suitable vessels for cannulation and robotically guide an attached needle toward the lumen center. The device demonstrated results comparable to or exceeding that of clinical standards, with a success rate of 87% on all participants (n = 31), a 97% success rate on nondifficult venous access participants (n = 25), and an average procedure time of 93 ± 30 s (n = 31). In the future, this device can be extended to other areas of vascular access such as IV catheterization, central venous access, dialysis, and arterial line placement.

| S-EPMC7156113 | biostudies-literature

Hand-held and integrated single-cell pipettes.

Project description:Successful single-cell isolation is a primary step for subsequent chemical and biological analyses of single cells. Conventional single-cell isolation methods often encounter operational complexity, limited efficiency, deterioration of cell viability, incompetence in the isolation of a single-cell into nanoliter liquid, and/or inability to select single adherent cells with specific phenotypes. Here, we develop a hand-held single-cell pipet (hSCP) that is rapid, operationally simple, highly efficient, and inexpensive for unbiased isolation of single viable suspended cells directly from submicroliter cell suspensions into nanoliter droplets without the assistance of any additional equipment. An integrated SCP (iSCP) has also been developed for selective isolation of single suspended and adherent cells according to the fluorescence imaging and morphological features. The isolated single cells can be conveniently transferred into standard 96-/384-well plates, Petri dishes, or vials for cloning, PCR, and other single-cell biochemical assays.

| S-EPMC4133013 | biostudies-literature

Rapid and Highly Controlled Generation of Monodisperse Multiple Emulsions via a One-Step Hybrid Microfluidic Device.

Project description:Multiple Emulsions (MEs) contain a drop laden with many micro-droplets. A single-step microfluidic-based synthesis process of MEs is presented to provide a rapid and controlled generation of monodisperse MEs. The design relies on the interaction of three immiscible fluids with each other in subsequent droplet formation steps to generate monodisperse ME constructs. The design is within a microchannel consists of two compartments of cross-junction and T-junction. The high shear stress at the cross-junction creates a stagnation point that splits the first immiscible phase to four jet streams each of which are sprayed to micrometer droplets surrounded by the second phase. The resulted structure is then supported by the third phase at the T-junction to generate and transport MEs. The ME formation within microfluidics is numerically simulated and the effects of several key parameters on properties of MEs are investigated. The dimensionless modeling of ME formation enables to change only one parameter at the time and analyze the sensitivity of the system to each parameter. The results demonstrate the capability of highly controlled and high-throughput MEs formation in a one-step synthesis process. The consecutive MEs are monodisperse in size which open avenues for the generation of controlled MEs for different applications.

| S-EPMC6722102 | biostudies-literature

Soft channel formation and symmetry breaking in exotic active emulsions.

Project description:We use computer simulations to study the morphology and rheological properties of a bidimensional emulsion resulting from a mixture of a passive isotropic fluid and an active contractile polar gel, in the presence of a surfactant that favours the emulsification of the two phases. By varying the intensity of the contractile activity and of an externally imposed shear flow, we find three possible morphologies. For low shear rates, a simple lamellar state is obtained. For intermediate activity and shear rate, an asymmetric state emerges, which is characterized by shear and concentration banding at the polar/isotropic interface. A further increment in the active forcing leads to the self-assembly of a soft channel where an isotropic fluid flows between two layers of active material. We characterize the stability of this state by performing a dynamical test varying the intensity of the active forcing and shear rate. Finally, we address the rheological properties of the system by measuring the effective shear viscosity, finding that this increases as active forcing is increased-so that the fluid thickens with activity.

| S-EPMC7522284 | biostudies-literature

Tip-multi-breaking in Capillary Microfluidic Devices.

Project description:We report tip-multi-breaking (TMB) mode of droplet breakup in capillary microfluidic devices. This new mode appears in a region embraced by Cai = 0 and lg(Cai) = -8.371(Ca0)?-7.36 with Ca0 varying from 0.35 to 0.63 on the Cai -?Ca0 phase diagram, Cai and Ca0 being the capillary numbers of inner and outer fluids, respectively. The mode is featured with a periodic, constant-speed thinning of the inner liquid tip and periodic formation of a sequence of droplets. The droplet number n in a sequence is determined by and increases with outer phase capillary number, and varies from two to over ten. The distribution of both pinch-off time and size of the droplets in a sequence is a geometric progression of common ratio that depends exclusively on and increases monotonically with the droplet number from its minimum value of 0.5 at n = 2 to its maximum value of 1 as n tends to infinity. These features can help identify the unique geometric morphology of droplet clusters and make them promising candidates for encryption and anti-fake identification.

| S-EPMC4468424 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data