Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation.

ABSTRACT: Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C), were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), and methanol oxidation activity compared using CV and chronoamperometry (CA). While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous)/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells.

SUBMITTER: Kang J

PROVIDER: S-EPMC5521225 | biostudies-other | 2013 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Core-shell Pd-P@Pt-Ni nanoparticles with enhanced activity and durability as anode electrocatalyst for methanol oxidation reaction.

Project description:Pd-P@Pt-Ni core-shell nanoparticles, which consisted of a Pd-P alloy as a core and Pt-Ni thin layer as a shell, were explored as electrocatalysts for methanol oxidation reaction. The crystallographic information and the electronic properties were fully investigated by X-ray diffraction and X-ray photoelectron spectroscopy. In the methanol electrooxidation reaction, the particles showed high catalytic activity and strong resistance to the poisoning carbonaceous species in comparison with those of commercial Pt/C and the as-prepared Pt/C catalysts. The excellent durability was demonstrated by electrochemically active surface area loss and chronoamperometric measurements. These results would be due to the enhanced catalytic properties of Pt by the double synergistic effects from the core part and the nickel species in the shell part.

| S-EPMC8979267 | biostudies-literature

Electrodeposition of Mesoporous Ni-Rich Ni-Pt Films for Highly Efficient Methanol Oxidation.

Project description:The use of soft templates for the electrosynthesis of mesoporous materials has shown tremendous potential in energy and environmental domains. Among all the approaches that have been featured in the literature, block copolymer-templated electrodeposition had robustness and a simple method, but it practically cannot be used for the synthesis of mesoporous materials not based on Pt or Au. Nonetheless, extending and understanding the possibilities and limitations of block copolymer-templated electrodeposition to other materials and substrates is still challenging. Herein, a critical analysis of the role of the solution's primary electroactive components and the applied potential were performed in order to understand their influences on the mesostructure of Ni-rich Ni-Pt mesoporous films. Among all the components, tetrahydrofuran and a platinum (IV) complex were shown to be crucial for the formation of a truly 3D mesoporous network. The electrosynthesized well-ordered mesoporous Ni-rich Ni-Pt deposits exhibit excellent electrocatalytic performance for methanol oxidation in alkaline conditions, improved stability and durability after 1000 cycles, and minimal CO poisoning.

| S-EPMC7466700 | biostudies-literature

Synthesis of Hollow Pt-Ni Nanoboxes for Highly Efficient Methanol Oxidation.

Project description:In direct methanol fuel cell technology, highly stable electrochemical catalysts are critically important for their practical utilization at the commercial scale. In this study, sub ~10?nm hollow Pt-Ni (1:1 at. ratio) nanoboxes supported on functionalized Vulcan carbon (Pt-Ni/C-R2) were synthesized through a facile method for the efficient electrooxidation of methanol. Two reaction procedures, namely, a simultaneous reduction and a modified sequential reduction method using a reverse microemulsion (RME) method, were adopted to synthesize solid Pt-Ni NPs and hollow nanoboxes, respectively. To correlate the alloy composition and surface structure with the enhanced catalytic activity, the results were compared with the nanocatalyst synthesized using a conventional NaBH4 reduction method. The calculated electroactive surface area for the Pt-Ni/C-R2 nanoboxes was 190.8?m2.g-1, which is significantly higher compared to that of the Pt-Ni nanocatalyst (96.4?m2.g-1) synthesized by a conventional reduction method. Hollow nanoboxes showed 34% and 44% increases in mass activity and rate of methanol oxidation reaction, respectively, compared to solid NPs. These results support the nanoreactor confinement effect of the hollow nanoboxes. The experimental results were supported by Density Functional Theory (DFT) studies, which revealed that the lowest CO poisoning of the Pt1Ni1 catalyst among all Ptm-Nin mixing ratios may account for the enhanced methanol oxidation. The synthesized hollow Pt-Ni/C (R2) nanoboxes may prove to be a valuable and highly efficient catalysts for the electrochemical oxidation of methanol due to their low cost, numerous catalytically active sites, low carbon monoxide poisoning, large electroactive surface area and long-term stability.

| S-EPMC6813309 | biostudies-literature

Mesoporous Pt@PtM (M = Co, Ni) cage-bell nanostructures toward methanol electro-oxidation.

Project description:Rational design of Pt-based nanostructures with a controllable morphology and composition is vital for electrocatalysis. Herein, we demonstrate a dual-template strategy to fabricate well-defined cage-bell nanostructures including a Pt core and a mesoporous PtM (M = Co, Ni) bimetallic shell (Pt@mPtM (M = Co, Ni) CBs). Owing to their unique nanostructure and bimetallic properties, Pt@mPtM (M = Co, Ni) CBs show higher catalytic activity, better durability and stronger CO tolerance for the methanol oxidation reaction than commercial Pt/C. This work provides a general method for convenient preparation of cage-bell nanostructures with a mesoporous bimetallic shell, which have high promising potential for application in electrocatalytic fields.

| S-EPMC9417950 | biostudies-literature

Facile Synthesis of Core/Shell-like NiCo2O4-Decorated MWCNTs and its Excellent Electrocatalytic Activity for Methanol Oxidation.

Project description:The design and development of an economic and highly active non-precious electrocatalyst for methanol electrooxidation is challenging due to expensiveness of the precursors as well as processes and non-ecofriendliness. In this study, a facile preparation of core-shell-like NiCo2O4 decorated MWCNTs based on a dry synthesis technique was proposed. The synthesized NiCo2O4/MWCNTs were characterized by infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and selected area energy dispersive spectrum. The bimetal oxide nanoparticles with an average size of 6?±?2?nm were homogeneously distributed onto the surface of the MWCNTs to form a core-shell-like nanostructure. The NiCo2O4/MWCNTs exhibited excellent electrocatalytic activity for the oxidation of methanol in an alkaline solution. The NiCo2O4/MWCNTs exhibited remarkably higher current density of 327?mA/cm(2) and a lower onset potential of 0.128?V in 1.0?M KOH with as high as 5.0?M methanol. The impressive electrocatalytic activity of the NiCo2O4/MWCNTs is promising for development of direct methanol fuel cell based on non-Pt catalysts.

| S-EPMC4734329 | biostudies-literature

Methanol electro oxidation on Ni-Pt-CrO/CNFs composite: morphology, structural, and electrochemical characterization.

Project description:In this work, prepared nanoparticle samples of Ni1-xCrx with a fixed ratio of platinum (3%) were synthesized and loaded onto carbon nanofibers, which were produced by an electrospinning technique and carbonized at 900 °C for 7 h in an argon atmosphere. A variety of analysis techniques were applied to examine the stoichiometry, structure, surface morphology, and electrochemical activity. The carbonization process produces carbon nanofibers decorated with metal nanoparticles. Typical fibre diameters are 250-520 nm. The fibre morphologies of the treated samples don't exhibit any overt alterations. A study of the samples' methanol electrocatalytic capabilities was conducted. Cyclic voltammetry, chronoamperometry, and electrochemical impedance measurements were used to investigate catalytic performance and electrode stability as a function of electrolyte concentration, scan rate, and reaction time. The electrooxidation reaction's activation energy is increased, and the electrode's stability is increased, when Cr is added to Ni. In sample C3, the maximum current density (JPE) was 170.3 mA/cm2 at 0.8 V with an onset potential of 0.352 V. Utilizing our electrocatalysts, the electrooxidation of methanol involves a mix of kinetic and diffusion control limiting reactions. This study has shown how to fabricate a powerful Ni-Pt-Cr-based methanol electrooxidation catalyst using a novel approach.

| S-EPMC10039033 | biostudies-literature

The Effect of PtRuIr Nanoparticle Crystallinity in Electrocatalytic Methanol Oxidation.

Project description:Two structural forms of a ternary alloy PtRuIr/C catalyst, one amorphous and one highly crystalline, were synthesized and compared to determine the effect of their respective structures on their activity and stability as anodic catalysts in methanol oxidation. Characterization techniques included TEM, XRD, and EDX. Electrochemical analysis using a glassy carbon disk electrode for cyclic voltammogram and chronoamperometry were tested in a solution of 0.5 mol L-1 CH₃OH and 0.5 mol L-1 H₂SO₄. Amorphous PtRuIr/C catalyst was found to have a larger electrochemical surface area, while the crystalline PtRuIr/C catalyst had both a higher activity in methanol oxidation and increased CO poisoning rate. Crystallinity of the active alloy nanoparticles has a big impact on both methanol oxidation activity and in the CO poisoning rate.

| S-EPMC5452513 | biostudies-other

Enhanced Photoinduced Electrocatalytic Oxidation of Methanol Using Pt Nanoparticle-Decorated TiO2-Polyaniline Ternary Nanofibers.

Project description:Herein, perylene-3,4,9,10-tetracarboxylic acid-doped polyaniline (PTP) nanofibers with/without photoreactive anatase TiO2 (TiO2-PTP and PTP, respectively) have been successively synthesized and subsequently decorated by Pt nanoparticles (Pt NPs) to prepare Pt-PTP and Pt-TiO2-PTP composites. High-resolution transmission electron microscopy confirms the presence of ∼3 nm spherical-shaped Pt NPs on both the composites along with TiO2 on Pt-TiO2-PTP. Pt loading on the composites is deliberately kept similar to compare the methanol electro-oxidation in the two composites. The Pt nanocomposites along with the precursor polyanilines are characterized by optical characterization, X-ray diffraction study, X-ray fluorescence spectroscopy, and Raman spectroscopy. The ternary composite-modified (Pt-TiO2-PTP) electrode demonstrates high electrocatalytic performance for methanol oxidation reaction in acid medium than Pt-PTP and Pt-TiO2. The higher electrochemical surface area (1.7 times), high forward/backward current ratio, and the higher CO tolerance ability for Pt-TiO2-PTP make it a superior catalyst for methanol oxidation reaction in the electrochemical process than Pt-PTP. Moreover, the catalytic activity of Pt-TiO2-PTP is further enhanced significantly with light irradiation. The cooperative effects of photo- and electrocatalysis on methanol oxidation reaction in Pt-TiO2-PTP enhance the methanol oxidation catalytic activity approximately 1.3 times higher in light illumination than in dark. Therefore, the present work will be proficient to get a light-assisted sustainable approach for developing the methanol oxidation reaction activity of Pt NP-containing catalysts in direct methanol fuel cells.

| S-EPMC6643921 | biostudies-literature

Facile in Situ Transformation of NiOOH into MOF-74(Ni)/NiO OH Heterogeneous Composite for Enchancing Electrocatalytic Methanol Oxidation.

Project description:A new MOF-74(Ni)/NiOOH heterogeneous composite was synthesized via NiOOH microsphere precursor. The electrocatalytic methanol oxidation reactions' (MOR) performance was assessed. The as-prepared MOF-74(Ni)/NiOOH exhibited excellent activity with high peak current density (27.62 mA·cm-2) and high mass activity (243.8 mA·mg-1). The enhanced activity could be a result of the synergistic effect of the MOF-74(Ni)/NiOOH heterocomposite providing more exposed active sites, a beneficial diffusion path between the catalyst surface and electrolyte, and improved conductivity, favorable for improving MOR performance.

| S-EPMC9000767 | biostudies-literature

Pt2CeO2 Heterojunction Supported on Multiwalled Carbon Nanotubes for Robust Electrocatalytic Oxidation of Methanol.

Project description:Herein, we prepared Pt2CeO2 heterojunction nanocluster (HJNS) on multiwalled carbon nanotubes (MWCNTs) in deep eutectic solvents (DESs) which is a special class of ionic liquids. The catalyst was then heat-treated at 400 °C in N2 (refer to Pt2CeO2/CNTs-400). The Pt2CeO2/CNTs-400 catalyst showed remarkably improved electrocatalytic performance towards methanol oxidation reaction (MOR) (839.1 mA mgPt-1) compared to Pt2CeO2/CNTs-500 (620.3 mA mgPt-1), Pt2CeO2/CNTs-300 (459.2 mA mgPt-1), Pt2CeO2/CNTs (641.6 mAmg-1) (the catalyst which has not been heat-treated) and commercial Pt/C (229.9 mAmg-1). Additionally, the Pt2CeO2/CNTs-400 catalyst also showed better CO poisoning resistance (onset potential: 0.47 V) compared to Pt2CeO2/CNTs (0.56 V) and commercial Pt/C (0.58 V). The improved performance of Pt2CeO2/CNTs-400 catalyst is attributed to the addition of appropriate CeO2, which changed the electronic state around the Pt atoms, lowered the d-band of Pt atoms, formed more Ce-O-Pt bonds acting as new active sites, affected the adsorption of toxic intermediates and weakened the dissolution of Pt; on the other hand, with the assistance of thermal treatment at 400 °C, the obtained Pt2CeO2 HJNS expose more new active sites at the interface between Pt and CeO2 to enhance the electrochemical active surface area (ECSA) and the dehydrogenation process of MOR. Thirdly, DES is beneficial to the increase of the effective component Pt(0) in the carbonization process. The study shows a new way to construct high-performance Pt-CeO2 catalyst for the direct methanol fuel cell (DMFC).

| S-EPMC10095660 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data