Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Effect of a Rapid Heating Rate, Mechanical Vibration and Surfactant Chemistry on the Structure-Property Relationships of Epoxy/Clay Nanocomposites.

ABSTRACT: The role of processing conditions and intercalant chemistry in montmorillonite clays on the dispersion, morphology and mechanical properties of two epoxy/clay nanocomposite systems was investigated in this paper. This work highlights the importance of employing complementary techniques (X-ray diffraction, small angle X-ray scattering, optical microscopy and transmission electron microscopy) to correlate nanomorphology to macroscale properties. Materials were prepared using an out of autoclave manufacturing process equipped to generate rapid heating rates and mechanical vibration. The results suggested that the quaternary ammonium surfactant on C30B clay reacted with the epoxy during cure, while the primary ammonium surfactant (I.30E) catalysed the polymerisation reaction. These effects led to important differences in nanocomposite clay morphologies. The use of mechanical vibration at 4 Hz prior to matrix gelation was found to facilitate clay dispersion and to reduce the area fraction of I.30E clay agglomerates in addition to increasing flexural strength by over 40%.

SUBMITTER: Nuhiji B

PROVIDER: S-EPMC5521326 | biostudies-other | 2013 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Mechanical property and structure of covalent functionalised graphene/epoxy nanocomposites.

Project description:Thermally reduced graphene nanoplatelets were covalently functionalised via Bingel reaction to improve their dispersion and interfacial bonding with an epoxy resin. Functionalised graphene were characterized by microscopic, thermal and spectroscopic techniques. Thermal analysis of functionalised graphene revealed a significantly higher thermal stability compared to graphene oxide. Inclusion of only 0.1 wt% of functionalised graphene in an epoxy resin showed 22% increase in flexural strength and 18% improvement in storage modulus. The improved mechanical properties of nanocomposites is due to the uniform dispersion of functionalised graphene and strong interfacial bonding between modified graphene and epoxy resin as confirmed by microscopy observations.

| S-EPMC3953726 | biostudies-other

Comparison of the Nanostructure and Mechanical Performance of Highly Exfoliated Epoxy-Clay Nanocomposites Prepared by Three Different Protocols.

Project description:Three different protocols for the preparation of polymer layered silicate nanocomposites based upon a tri-functional epoxy resin, triglycidyl para-amino phenol (TGAP), have been compared in respect of the cure kinetics, the nanostructure and their mechanical properties. The three preparation procedures involve 2 wt% and 5 wt% of organically modified montmorillonite (MMT), and are: isothermal cure at selected temperatures; pre-conditioning of the resin-clay mixture before isothermal cure; incorporation of an initiator of cationic homopolymerisation, a boron tri-fluoride methyl amine complex, BF₃·MEA, within the clay galleries. It was found that features of the cure kinetics and of the nanostructure correlate with the measured impact strength of the cured nanocomposites, which increases as the degree of exfoliation of the MMT is improved. The best protocol for toughening the TGAP/MMT nanocomposites is by the incorporation of 1 wt% BF₃·MEA into the clay galleries of nanocomposites containing 2 wt% MMT.

| S-EPMC5455920 | biostudies-other

Mechanical properties of epoxy nanocomposites filled with melamine functionalized molybdenum disulfide.

Project description:In this work, a melamine functionalized molybdenum disulfide (M-MoS2) was prepared and used as fillers to form epoxy (EP)/MoS2 nanocomposites. The effects of molybdenum disulfide (MoS2) and melamine functionalized molybdenum disulfide (M-MoS2) loading on the mechanical properties of epoxy composites were investigated and compared. With only addition of 0.8 wt% M-MoS2, the tensile strength and modulus of EP/M-MoS2 nanocomposites showed 4.5 and 4.0 times increase over the neat epoxy. Interestingly, the elongation at break value of EP was also increased with the introduction of M-MoS2 fillers. These properties could result from the good dispersion and strong interfacial adhesion of M-MoS2 fillers and the EP matrix. Therefore, this work provides a facile way to produce of high-performance EP nanocomposites.

| S-EPMC9080842 | biostudies-literature

Anti-corrosive and oil sensitive coatings based on epoxy/polyaniline/magnetite-clay composites through diazonium interfacial chemistry.

Project description:Epoxy polymer nanocomposites filled with magnetite (Fe3O4) clay (B), named (B-DPA-PANI@Fe3O4) have been prepared at different filler loading (0.1, 0.5, 1, 3, 5 wt. %). The surface modification of clay by polyaniline (PANI) is achieved in the presence of 4-diphenylamine diazonium salt (DPA). The effects of the nanofiller loading on Tensile, mechanical and dielectric properties were systematically studied. Improved properties was highlighted for all reinforced samples. The addition of only 3 wt. % of the filler enhanced the tensile strength of the composites by 256%, and the glass transition temperature Tg by 37%. The dielectric spectra over a broad frequency showed a robust interface between the hybrid (B-DPA-PANI@Fe3O4) fillers and epoxy matrix. The results showed most significant improvement in corrosion inhibition using electrochemical impedance spectroscopy (EIS) in 3.5 wt % NaCl, as well as a significant response in oil sensing test. High charge transfer resistance of 110?×?106 ?.cm2 using 3-wt % of filler was noted compared to 0.35?×?106 ?.cm2 for the pure epoxy. The results obtained herein will open new routes for the preparation of efficient anticorrosion sensor coatings.

| S-EPMC6127100 | biostudies-literature

On the Effect of Nanoparticle Surface Chemistry on the Electrical Characteristics of Epoxy-Based Nanocomposites.

Project description:The effect of nanosilica surface chemistry on the electrical behavior of epoxy-based nanocomposites is described. The nanosilica was reacted with different volumes of (3-glycidyloxypropyl)trimethoxysilane and the efficacy of the process was demonstrated by infrared spectroscopy and combustion analysis. Nanocomposites containing 2 wt % of nanosilica were prepared and characterized by scanning electron microscopy (SEM), AC ramp electrical breakdown testing, differential scanning calorimetry (DSC) and dielectric spectroscopy. SEM examination indicated that, although the nanoparticle dispersion improved somewhat as the degree of surface functionalization increased, all samples nevertheless contained agglomerates. Despite the non-ideal nature of the samples, major improvements in breakdown strength (from 182 ± 5 kV·mm-1 to 268 ± 12 kV·mm-1) were observed in systems formulated from optimally treated nanosilicas. DSC studies of the glass transition revealed no evidence for any modified interphase regions between the nanosilica and the matrix, but interfacial effects were evident in the dielectric spectra. In particular, changes in the magnitude of the real part of the permittivity and variations in the interfacial ?'-relaxation suggest that the observed changes in breakdown performance stem from variations in the polar character of the nanosilica surface, which may affect the local density of trapping states and, thereby, charge transport dynamics.

| S-EPMC6431979 | biostudies-literature

Swelling transition of a clay induced by heating.

Project description:Clays are of paramount importance for soil stability, but also in applications ranging from oil recovery to composites and hydrogels. Generically, clays are divided into two subclasses: macroscopically swelling, 'active' clays that have the capacity for taking up large amounts of water to form stable gels, and 'passive' or non-swelling clays; the former stabilize soils whereas the latter are known to lead to landslides. However, it has been unclear so far what mechanisms underlie clay swelling. Here, we report the first observation of a temperature-induced transition from a passive to an active, swelling clay. We propose a simple description of the swelling transition; while net attractive interactions are dominant at low temperatures so that the clay particles remain attached to each other in stacks, at higher temperatures it is energetically favourable for the clay to swell due to the entropy that is gained by counterions which are liberated during swelling.

| S-EPMC3431542 | biostudies-literature

Effect of the alumina micro-particle sizes on the thermal conductivity and dynamic mechanical property of epoxy resin.

Project description:Epoxy thermal conductive adhesives with high thermal conductivity and dynamic mechanical properties are important thermally conductive materials for fabricating highly integrated electronic devices. In this paper, micro-Al2O3 is used as a thermally conductive filler for the epoxy resin composite and investigated the effect of micron-sized alumina particle size on the thermal conductivity and dynamic mechanical property of epoxy resin by the transient planar hot plate method and DMA (Dynamic mechanical analysis). The experimental results show that with the same amount of alumina filling, the thermal conductivity and Tg (glass transition temperature) of epoxy/Al2O3 composite material decrease with the increase of alumina particle size. The maximum thermal conductivity of the composite material is 0.679 (W/mK), while the energy storage modulus of epoxy/Al2O3 composite material increases with the increase of alumina particle size, and the maximum energy storage modulus of the composite material is 160MPa. Compared with pure epoxy resin, the thermal conductivity and energy storage modulus have increased by 2.7 and 3.2 times, respectively. The epoxy/Al2O3 composite was applied to the COB (Chips On Board) type LED package, and the substrate temperature of the LED dropped to the lowest after 1.5 hours of operation using EP-A5 composite, and the temperature was stabilized at 38.2°C, indicating that the addition of 5-micron alumina composite has the best heat dissipation in the COB type LED package. These results are critical for the implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.

| S-EPMC10575537 | biostudies-literature

Development of Marine Antifouling Epoxy Coating Enhanced with Clay Nanotubes.

Project description:An antifouling epoxy resin doped with natural clay nanotubes that are loaded with biocide or silver allowed extended protection against the proliferation of marine microorganisms. Compared to the 2-3 months of protection with antifoulant dichlorooctylisothiazolone (DCOIT) directly admixed into epoxy resin, the DCOIT release time of the halloysite formulations was extended to 12 months by incorporating biocide-loaded nanoclay in the polymer matrix. The protective properties of the epoxy-halloysite nanocomposites showed much less adhesion and proliferation of marine bacteria Vibrio natriegens on the resin surface after a two-month exposure to seawater than the coating formulations directly doped with non-encapsulated DCOIT. The coating formulation protection efficiency was further confirmed by twelve-month shallow field tests in the South China Sea. Replacing 2 wt.% biocide in the traditional formula with DCOIT-loaded natural environmentally friendly halloysite clay drastically improved the antifouling properties of the epoxy coating, promising scalable applications in protective marine coating. The antifouling property of epoxy resin was enhanced with silver particles synthesized on halloysite nanotubes. A natural mixture of MnO particles and halloysite could also be used as a nonbiocide additive to marine coating. The short-term White Sea water test of epoxy coating with 5% of Ag-halloysite composite of MnO-halloysite natural mixture showed no visible fouling.

| S-EPMC6947195 | biostudies-literature

Complex Network Representation of the Structure-Mechanical Property Relationships in Elastomers with Heterogeneous Connectivity.

Project description:The complicated structure-property relationships of materials have recently been described using a methodology of data science that is recognized as the fourth paradigm in materials science. In network polymers or elastomers, the manner of connection of the polymer chains among the crosslinking points has a significant effect on the material properties. In this study, we quantitatively evaluate the structural heterogeneity of elastomers at the mesoscopic scale based on complex network, one of the methods used in data science, to describe the elastic properties. It was determined that a unified parameter with topological and spatial information universally describes some parameters related to the stresses. This approach enables us to uncover the role of individual crosslinking points for the stresses, even in complicated structures. Based on the data science, we anticipate that the structure-property relationships of heterogeneous materials can be interpretatively represented using this type of "white box" approach.

| S-EPMC7691396 | biostudies-literature

Effect of Nanoparticles Surface Bonding and Aspect Ratio on Mechanical Properties of Highly Cross-Linked Epoxy Nanocomposites: Mesoscopic Simulations.

Project description:The paper aims to study the mechanical properties of epoxy resin filled with clay nanoparticles (NPs), depending on their shapes and content on the surface of a modifying agent capable of forming covalent bonds with a polymer. The cylindrical clay nanoparticles with equal volume and different aspects ratios (disks, barrel, and stick) are addressed. The NPs' bonding ratio with the polymer (RGC) is determined by the fraction of reactive groups and conversion time and varies from RGC = 0 (non-bonded nanoparticles) to RGC = 0.65 (more than half of the surface groups are linked with the polymer matrix). The performed simulations show the so-called load-bearing chains (LBCs) of chemically cross-linked monomers and modified nanoparticles to determine the mechanical properties of the simulated composites. The introduction of nanoparticles leads to the breaking of such chains, and the chemical cross-linking of NPs with the polymer matrix restores the LBCs and strengthens the composite. At small values of RGC, the largest value of the elastic modulus is found for systems filled with nanoparticles having the smallest surface area, and at high values of RGC, on the contrary, the systems containing disk-shaped particles with the largest surface area have a larger elastic modulus than the others. All calculations are performed within the framework of a mesoscopic model based on accurate mapping of the atomistic structures of the polymer matrix and nanoparticles into coarse-grained representations, which, if necessary, allow reverse data mapping and quantitative assessment of the state of the filled epoxy resin. On the other hand, the obtained data can be used to design the functional materials with specified mechanical properties based on other practically significant polymer matrices and nanofillers.

| S-EPMC8587117 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data