BONE RESPONSE TO STAINLESS STEEL AND TITANIUM BONE PLATES: An Experimental Study On Animals.
Ontology highlight
ABSTRACT:
SUBMITTER: Sahoo NK
PROVIDER: S-EPMC5529616 | biostudies-other | 1994 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:BACKGROUND:Orthopaedic implant infections are difficult to eradicate because bacteria adhering to implant surfaces inhibit the ability of the immune system and antibiotics to combat these infections. Thermal cycling is a temperature modulation process that improves performance and longevity of materials through molecular structural reorientation, thereby increasing surface uniformity. Thermal cycling may change material surface properties that reduce the ability for bacteria to adhere to the surface of orthopaedic implants. This study aims to determine whether thermal cycling of orthopaedic implants can reduce bacterial growth. METHODS:In a randomized, blinded in-vitro study, titanium and stainless steel plates treated with thermal cycling were compared to controls. Twenty-seven treated and twenty-seven untreated plates were covered with 10 ml tryptic soy broth containing ~?105 colony forming units (CFU)/ml of bioluminescent Staphylococcus aureus (S. aureus)Xen29 and incubated at 37 °C for 14d. Quantity and viability of bacteria were characterized using bioluminescence imaging, live/dead staining and determination of CFUs. RESULTS:Significantly fewer CFUs grow on treated stainless steel plates compared to controls (p?=?0.0088). Similar findings were seen in titanium plates (p?=?0.0048) following removal of an outlier. No differences were evident in live/dead staining using confocal microscopy, or in metabolic activity determined using bioluminescence imaging (stainless steel plates: p?=?0.70; titanium plates: p?=?0.26). CONCLUSION:This study shows a reduction in CFUs formation on thermal cycled plates in-vitro. Further in-vivo studies are necessary to investigate the influence of thermal cycling on bacterial adhesion during bone healing. Thermal cycling has demonstrated improved wear and strength, with reductions in fatigue and load to failure. The added ability to reduce bacterial adhesions demonstrates another potential benefit of thermal cycling in orthopaedics, representing an opportunity to reduce complications following fracture fixation or arthroplasty.
| S-EPMC6062927 | biostudies-literature
Project description:A/J mice are genetically predisposed to spontaneous and/or chemically-induced lung tumors while C57BL/6J (B6) mice are resistant. This genetic disparity provides a unique scenario to identify molecular mechanisms associated with the lung response to welding fume at the transcriptome level.
2010-04-30 | GSE20174 | GEO
Project description:Prions are notorious for their extraordinary resistance to traditional methods of decontamination, rendering their transmission a public health risk. Iatrogenic Creutzfeldt-Jakob disease (iCJD) via contaminated surgical instruments and medical devices has been verified both experimentally and clinically. Standard methods for prion inactivation by sodium hydroxide or sodium hypochlorite have failed, in some cases, to fully remove prion infectivity, while they are often impractical for routine applications. Prion accumulation in peripheral tissues and indications of human-to-human bloodborne prion transmission, highlight the need for novel, efficient, yet user-friendly methods of prion inactivation. Here we show both in vitro and in vivo that homogenous photocatalytic oxidation, mediated by the photo-Fenton reagent, has the potential to inactivate the pathological prion isoform adsorbed on metal substrates. Photocatalytic oxidation with 224 ?g mL(-1) Fe (3+), 500 ?g mL(-1) h(-1) H 2O 2, UV-A for 480 min lead to 100% survival in golden Syrian hamsters after intracranial implantation of stainless steel wires infected with the 263K prion strain. Interestingly, photocatalytic treatment of 263K infected titanium wires, under the same experimental conditions, prolonged the survival interval significantly, but failed to eliminate infectivity, a result that we correlate with the increased adsorption of PrP(Sc) on titanium, in comparison to stainless steel. Our findings strongly indicate that our, user--and environmentally--friendly protocol can be safely applied to the decontamination of prion infected stainless steel surfaces.
| S-EPMC4201617 | biostudies-literature
Project description:Bronization and carburization of fine-grain superplastic stainless steel is reviewed, and new experimental results for fine grain Ti88.5Al4.5V₃Fe₂Mo₂ are reported. In superplastic duplex stainless steel, the diffusion of carbon and boron is faster than in non-superplastic duplex stainless steel. Further, diffusion is activated by uniaxial compressive stress. Moreover, non-superplastic duplex stainless steel shows typical grain boundary diffusion; however, inner grain diffusion is confirmed in superplastic stainless steel. The presence of Fe and Cr carbides or borides is confirmed by X-ray diffraction, which indicates that the diffused carbon and boron react with the Fe and Cr in superplastic stainless steel. The Vickers hardness of the carburized and boronized layers is similar to that achieved with other surface treatments such as electro-deposition. Diffusion of boron into the superplastic Ti88.5Al4.5V₃Fe₂Mo₂ alloy was investigated. The hardness of the surface exposed to boron powder can be increased by annealing above the superplastic temperature. However, the Vickers hardness is lower than that of Ti boride.
| S-EPMC5448689 | biostudies-other
Project description:This report introduces a novel technique that allows a safe and predictable canal negotiation, creation of a glide path and canal preparation with reciprocating nickel-titanium or stainless steel engine-driven instruments in canals where the use of rotary and the newly developed reciprocating instruments is contraindicated. In this novel technique, the instruments are used in reciprocating motion with very small angles. Hand files are not used regardless of the complexity of the canal anatomy. It also allows achieving predictable results in canal negotiation and glide path creation in challenging canals without the risk of instrument fracture.
| S-EPMC4320282 | biostudies-literature
Project description:In this work, we present laser coloration on 304 stainless steel using nanosecond laser. Surface modifications are tuned by adjusting laser parameters of scanning speed, repetition rate, and pulse width. A comprehensive study of the physical mechanism leading to the appearance is presented. Microscopic patterns are measured and employed as input to simulate light-matter interferences, while chemical states and crystal structures of composites to figure out intrinsic colors. Quantitative analysis clarifies the final colors and RGB values are the combinations of structural colors and intrinsic colors from the oxidized pigments, with the latter dominating. Therefore, the engineering and scientific insights of nanosecond laser coloration highlight large-scale utilization of the present route for colorful and resistant steels.
| S-EPMC5541041 | biostudies-literature
Project description:Cronobacter sakazakii is well-known for its desiccation tolerance in the powdered infant formula (PIF) food production environment and the bacterium has been linked with high fatality rates in neonates who consume contaminated product. In this study, using deep-level RNA-sequencing, differentially expressed genes were studied in C. sakazakii ATCCTM29544 grown in simulated low-moisture environment designed to mimic the PIF production environment. Desiccation of bacteria was carried out on stainless steel coupons from which total RNA was subsequently recovered and sequenced. During 4 h of desiccation from the early stationary phase (ESP) grown culture, an approximately 3 log10 reduction was recorded for C. sakazakii viable cell count, with the largest change in viable cells occurring between desiccation hour 1 and 2 during which the culture medium was completely dried. Transcriptomic data obtained after 4 h of desiccation highlighted several highly-up regulated osmotolerance-related genes which were associated with the secondary response mechanism. These actively expressed genes mainly modulate pathways that synthetize glycine betaine and trehalose as well as the transport of these two and other compatible solutes. Understanding the activities of these genes and pathways will assist the development of technologies that mitigate the survival of C. sakazakii in the PIF production process.
2021-10-04 | GSE129553 | GEO
Project description:Additively manufactured (AM) metallic materials commonly possess substantial microscale internal stresses that manifest as intergranular and intragranular residual stresses. However, the impact of these residual stresses on the mechanical behaviour of AM materials remains unexplored. Here we combine in situ synchrotron X-ray diffraction experiments and computational modelling to quantify the lattice strains in different families of grains with specific orientations and associated intergranular residual stresses in an AM 316L stainless steel under uniaxial tension. We measure pronounced tension-compression asymmetries in yield strength and work hardening for as-printed stainless steel, and show they are associated with back stresses originating from heterogeneous dislocation distributions and resultant intragranular residual stresses. We further report that heat treatment relieves microscale residual stresses, thereby reducing the tension-compression asymmetries and altering work-hardening behaviour. This work establishes the mechanistic connections between the microscale residual stresses and mechanical behaviour of AM stainless steel.
| S-EPMC6761200 | biostudies-literature
Project description:This paper aims to establish the most indicated route to manufacture a nanostructured powder composed of 5 wt% Multi-walled Carbon Nanotubes and 304LSS powder. Four specimens were prepared using Mechanical Alloying and Chemical Treatment (CT) with Hydrogen Peroxide ([Formula: see text]) as the main processes. A thermal treatment post-processing was used in half of the samples to remove the remaining amorphous carbon and to evaluate its effects. Regarding the powder analysis, attachment, amorphous carbon degree, crystallinity, and doping of the CNT throughout the metal matrix were investigated. The nanostructured powders were then inserted as a core in a 304LSS tubular rod to perform the arc welding process. The CT route eliminated the amorphous carbon and generated more refiner grains, which provided a cross-section hardness gain of more than 40% regarding the 304LSS joint. In summary, the CT route, combined with the GTAW process, provided a new method for nanocomposite manufacturing by combining shorter preparation steps, obtaining an improvement in the microstructural and hardness performance.
| S-EPMC7578026 | biostudies-literature
Project description:Titanium plates and screws (implants) developed indigenously by DRDO were used to manage 20 patients with maxillofacial fractures. Efficacy of these implants was evaluated clinically and radiographically so that these can be put into use on routine basis. In 18 patients recovery was uneventful. Extended maxillomandibullar fixation was employed for 3 to 7 days only depending on the degree and displacement of fractures and; mobilisation of jaw was allowed fully from 7th post operative day onwards. 2 patients developed discharging sinus at the fractured mandibular angle region which was due to impacted mandibular third molar in the line of fracture. This healed completely after extraction of offending tooth and appropriate medication. There was no occlusal or nerve disturbances, wound dehiscence or rejection of the bone implant. Radiographical evaluation at various intervals showed good alignment, approximation and sound healing of fractured fragments, with complete osteointegration.
| S-EPMC5531927 | biostudies-other