Assessment of aluminum bioavailability in alum sludge for agricultural utilization.
Ontology highlight
ABSTRACT:
SUBMITTER: Kluczka J
PROVIDER: S-EPMC5537322 | biostudies-other | 2017 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:BackgroundThe production of agricultural wastes still growing as a consequence of the population growing. However, the majority of these residues are under-utilized due their chemical composition, which is mainly composed by cellulose. Actually, the search of cellulases with high efficiency to degrade this carbohydrate remains as the challenge. In the present experiment, two genes encoding an endoglucanase (EC 3.2.1.4) and β-glucosidase (EC 3.2.1.21) were overexpressed in Escherichia coli and their recombinant enzymes (egl-FZYE and cel-FZYE, respectively) characterized. Those genes were found in Trabulsiella odontermitis which was isolated from the gut of termite Heterotermes sp. Additionally, the capability to release sugars from agricultural wastes was evaluated in both enzymes, alone and in combination.ResultsThe results have shown that optimal pH was 6.0 and 6.5, reaching an activity of 1051.65 ± 47.78 and 607.80 ± 10.19 U/mg at 39 °C, for egl-FZYE and cel-FZYE, respectively. The Km and Vmax for egl-FZYE using CMC as substrate were 11.25 mg/mL and 3921.57 U/mg, respectively, whereas using Avicel were 15.39 mg/mL and 2314.81 U/mg, respectively. The Km and Vmax for cel-FZYE using Avicel as substrate were 11.49 mg/mL and 2105.26 U/mg, respectively, whereas using CMC the enzyme did not had activity. Both enzymes had effect on agricultural wastes, and their effect was improved when they were combined reaching an activity of 955.1 ± 116.1, 4016.8 ± 332 and 1124.2 ± 241 U/mg on corn stover, sorghum stover and pine sawdust, respectively.ConclusionsBoth enzymes were capable of degrading agricultural wastes, and their effectiveness was improved up to 60% of glucose released when combined. In summary, the results of the study demonstrate that the recombinant enzymes exhibit characteristics that indicate their value as potential feed additives and that the enzymes could be used to enhance the degradation of cellulose in the poor-quality forage generally used in ruminant feedstuffs.
| S-EPMC7986525 | biostudies-literature
Project description:Agricultural application of sewage sludge (SS) after carbonization is a plausible way for disposal. Despite its benefits of improving soil fertility and C sequestration, heavy metals contained in sewage sludge biochars (SSB) are still a concern. In this study, two types of heavy metal stabilizers were chosen: fulvic acid (FA) and phosphogypsum (with CaSO4, CS, as the main component). The two stabilizers were incorporated into SS prior to 350°C carbonization for 1 h at the rates of 1%, 2%, or 4%. The obtained SSBs were then analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Total and available concentrations of four heavy metals, i.e., Zn, Pb, Cd, and Ni, in the SSBs were determined. In addition, a series of pot soil culture experiments was conducted to investigate the effects of stabilizers incorporation into SSB on heavy metal bioavailability and the uptake by plants (corn as an indicator) and plant biomass yield, with SS and SSB (no stabilizers) as controls. The results showed that incorporation of both FA and CS increased functional groups such as carboxyl, phenol, hydroxyl, amine and quinine groups in the SSBs. The percentage of heavy metals in sulfuric and oxidizable state and residual state of SSBs were significantly increased after carbonization, and hence the mobility of the heavy metals in SSBs was decreased. The introduction of the stabilizers (i.e., FA or CS) significantly lowered the total and available concentrations of Zn, Pb, Cd, and Ni. The reduction in available heavy metal concentration increased with incorporation rate of the stabilizers from 1% to 4%. In the treatments with FA or CS incorporated SSB, less heavy metals were taken up by plants and more plant biomass yields were obtained. The mitigating effects were more pronounced at higher rates of FA or CS stabilizer. These findings provide a way to lower bioavailability of heavy metals in SS or SSB for land application or horticulture as a peat substitute.
| S-EPMC5568343 | biostudies-literature
Project description:Background With increasing food demand as a consequence of the growing world population, there is a corresponding demand for additional sources of phosphorus (P). Alum-phosphate (Al-P) sludge is a by-product of wastewater treatment and can be a good source of P. In this study, the response of maize (Zea mays L.) to Al-P sludge was tested. Maize was chosen as the test crop due to its prevalent use as human and animal food and as a source of biofuel. The objective of the study was to investigate Al-P sludge as a source of P compared to a commercial fertilizer (monoammonium phosphate, MAP). Methods A growth chamber assay was conducted over four cropping cycles (45 d each). The application rate was 9.7, 19.4, 29.1 and 38.8 mg P kg−1 dry soil. Amendments were applied once at the start of the first cropping cycle. Plants were harvested after each cycle and pots were re-seeded. Dry matter yield (DMY), total P uptake, Al-P uptake, soil total P and Olsen-P concentrations, pH, and EC were measured. Results DMY was significantly greater in pots amended with Al-P sludge than in pots treated with MAP. There was a significant rate × cropping cycle interaction effect on DMY with the differences among rates in cycle 1 different from those in cycle 4. Phosphorus uptake depended on cropping cycle, P source and P application rate. With sludge uptake higher than MAP in all cycles, the highest P uptake was observed at the highest application rate except for cycle 2 where this was observed at the rate of 29.1 mg kg−1. For MAP, phosphorus recovery efficiency (PRE) at the highest rate was significantly greater than that at the lowest rate whereas PRE in cycle 1 was significantly higher than that in cycle 4. In the first two cycles, aluminum uptake was negligible in both MAP and Al-P sludge treatments; however, in cycles 3 and 4, there was significantly more Al in maize from sludge amended pots. Our results show that Al-P sludge was as effective as MAP in supplying enough P for biomass yield. We, therefore, conclude that Al-P sludge could be an alternative source of P, especially for growing maize as feedstock for bioenergy.
| S-EPMC9392449 | biostudies-literature
Project description:This work is devoted to the investigation of the methanogenic archaea involved in anaerobic digestion of cattle manure and maize straw on the basis of terminal restriction fragment length polymorphism (T-RFLP) analysis of archaeal 16S rRNA genes. The biological diversity and dynamics of methanogenic communities leading to anaerobic degradation of agricultural organic wastes with biogas production were evaluated in laboratory-scale digesters. T-RFLP analysis, along with the establishment of archaeal 16S rRNA gene clone libraries, showed that the methanogenic consortium consisted mainly of members of the generaMethanosarcinaandMethanoculleus,with a predominance ofMethanosarcinaspp. throughout the experiment.
| S-EPMC3548177 | biostudies-literature
Project description:Sewage sludge is a high-volume and low-cost waste commonly generated worldwide, so its utilization is a vital issue. The application of this waste in the manufacturing of lightweight aggregates was investigated. The process was performed using intensive mixers with volumes of 5 and 30 L, as well as the industrial 500 L mixer. Then, granulates were sintered in a tube furnace. The influence of composition and mixer size on the particle size, microstructure, mechanical performance, and stability of lightweight aggregates in different environments was analyzed. The best results were obtained for a 500 L mixer, enhancing the industrial potential of the presented process. Increasing the share of sewage sludge in the composition of aggregates enhanced their porosity and reduced the specific weight, which caused a drop in compressive strength. Nevertheless, for all analyzed materials, the mechanical performance was superior compared to many commercial products. Therefore, sewage sludge can be efficiently applied as a raw material for the manufacturing of lightweight aggregates. The presented results confirm that a proper adjustment of composition allows easy the tailoring of aggregates' performance and cost.
| S-EPMC7764059 | biostudies-literature
Project description:Fluoroquinolones (FQs) are a widespread class of broad-spectrum antibiotics prescribed as a first line of defense, and, in some cases, as the only treatment against bacterial infection. However, when administered orally, reduced absorption and bioavailability can occur due to chelation in the gastrointestinal tract (GIT) with multivalent metal cations acquired from diet, coadministered compounds (sucralfate, didanosine), or drug formulation. Predicting the extent to which this interaction reduces in vivo antibiotic absorption and systemic exposure remains desirable yet challenging. In this study, we focus on quinolone interactions with magnesium, calcium and aluminum as found in dietary supplements, antacids (Maalox) orally administered therapies (sucralfate, didanosine). The effect of FQ-metal complexation on absorption rate was investigated through a combined molecular and pharmacokinetic (PK) modeling study. Quantum mechanical calculations elucidated FQ-metal binding energies, which were leveraged to predict the magnitude of reduced bioavailability via a quantitative structure-property relationship (QSPR). This work will help inform clinical FQ formulation design, alert to possible dietary effects, and shed light on drug-drug interactions resulting from coadministration at an earlier stage in the drug development pipeline.
| S-EPMC8143323 | biostudies-literature
Project description:This study investigated the co-pyrolysis of blends of sewage sludge (SS) with rice husk (RH) and with hemp straw (HS) at different ratios by using thermogravimetry (TG) and its rate (DTG, derivative TG) analysis at heating rates of 10, 20, and 30 K/min. The resulting kinetic parameters of activation energy (E a) were calculated by both Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose models, followed by comparison of experimental values with calculated values to reveal the synergistic effects of SS/RH and SS/HS. With increasing additions of RH or HS to SS, a gradual decreasing trend in the experimental pyrolysis temperature range was evident, ranging from 144.5 to 95.2 °C for SS/RH and from 144.5 to 88.8 °C for SS/RH. Moreover, such temperature ranges were 6.7-20.4 °C less than the calculated values at the same blending ratio. The fitting results of the two kinetic models showed that with the same SS mass ratio, the experimental E a * (average activation energy) of both SS/RH and SS/HS were less than the calculated E a *. Especially, the experimental E a * of 7SS-3RH was lower around 43.8% than the calculated E a *, whereas the experimental E a * of 3SS-7HS was lower by about 39.4% than the calculated E a *. Synergistic analysis demonstrated that the co-pyrolysis of RH or HS with SS at various mass ratios presented obvious synergistic effects and then the decrease of E a. The mechanism experiment showed that the co-pyrolysis of SS/HS may promote the decrease of E a by changing the co-pyrolysis gas products or by increasing the overflow of volatile matter and then forming intermediate transition products, while SS/RH may accelerate the decrease of the E a by using an appropriate K addition ratio from RH as a metal catalyst.
| S-EPMC8757449 | biostudies-literature
Project description:Assessing drug disposition in the skin after the application of a topical formulation is difficult. It is hypothesized that reverse iontophoresis (RI), which can extract charged/polar molecules for monitoring purposes, may provide a noninvasive approach for the assessment of local drug bioavailability. The passive and RI extraction of salicylic acid (SA) and nicotine (NIC) from porcine skin in vitro was assessed after a simple solution of the former and a transdermal patch of the latter had been applied for 24 and 8 h, respectively. Immediately after this "passive skin loading", the amount of drug in the stratum corneum (SC) and "viable" tissue (VT) was measured either (a) after tape-stripping and subsequent solvent extraction of both skin layers or (b) following RI extraction over 4 h. Parallel experiments were then performed in vivo in healthy volunteers; in this case, the VT was not sampled and the skin loading period for NIC was only 4 h. RI extraction of both drugs was significantly higher (in vitro and in vivo) than that achieved passively, and the cumulative RI extraction profiles as a function of time were mathematically analyzed using a straightforward compartmental model. Best-fit estimates of drug amounts in the SC and VT (ASC,0 and AVT,0, respectively) at the end of "loading" and two first-order rate constants describing transfer between the model compartments were then determined. The in vitro predictions of ASC,0 and AVT,0 were in excellent agreement with the experimental results, as was the value of the former in vivo. The rate constants derived from the in vitro and in vivo results were also similar. In summary, the results provide proof-of-concept that the RI method has the potential to noninvasively assess relevant metrics of drug bioavailability in the skin.
| S-EPMC10762657 | biostudies-literature
Project description:Carotenoids have been known to reduce the risk of several diseases including cancer and cardiovascular. However, carotenoids are unstable and susceptible to degradation. Rhinacanthus nasutus (L.) Kurz (R. nasutus), a Chinese medicinal herb rich in carotenoids, was reported to possess vital biological activities such as anti-cancer. This study intends to isolate carotenoids from R. nasutus by column chromatography, identify and quantify by HPLC-MS, and prepare carotenoid microemulsions for determination of absolute bioavailability in rats. Initially, carotenoid fraction was isolated using 250?mL ethyl acetate poured into an open-column packed with magnesium oxide-diatomaceous earth (1:3, w/w). Fourteen carotenoids including internal standard ?-apo-8'-carotenal were resolved within 62 min by a YMC C30 column and gradient mobile phase of methanol-acetonitrile-water (82:14:4, v/v/v) and methylene chloride. Highly stable carotenoid microemulsions were prepared using a mixture of Capryol(TM)90, Transcutol®HP, Tween 80 and deionized water, with the mean particle being 10.4?nm for oral administration and 10.7?nm for intravenous injection. Pharmacokinetic study revealed that the absolute bioavailability of carotenoids in microemulsions and dispersion was 0.45% and 0.11%, respectively, while a much higher value of 6.25% and 1.57% were shown for lutein, demonstrating 4-fold enhancement in bioavailability upon incorporation of R. nasutus carotenoids into a microemulsion system.
| S-EPMC4858739 | biostudies-literature
Project description:The electrocoagulation setup must be optimized in order to design an economically feasible process. Therefore, in this work, the effect of the punched aluminum electrode on the performance of the electrocoagulation (EC) has been investigated. A series of experiments were performed for treatment of sewage wastewater using plane electrode and compare with punched electrodes. Effect of contact time, voltage, electrode spacing and stirring speed has been optimized for removal of Biochemical oxygen demand (BOD) and Total dissolved solids (TDS). It was observed that the performance of electrocoagulation process increased using punched electrode. Also, the less operating cost noticed in punched electrode as compared to a plane electrode for (70-80%) removal of BOD and TDS. These data would be useful in designing of an EC reactor to obtain high removal efficiency at low energy consumption.
| S-EPMC6058665 | biostudies-literature