Novel Flexible Wearable Sensor Materials and Signal Processing for Vital Sign and Human Activity Monitoring.
Ontology highlight
ABSTRACT:
SUBMITTER: Servati A
PROVIDER: S-EPMC5539541 | biostudies-other | 2017 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Despite coronavirus disease 2019, cardiovascular disease, the leading cause of global death, requires timely detection and treatment for a high survival rate, underscoring the 24 h monitoring of vital signs. Therefore, telehealth using wearable devices with vital sign sensors is not only a fundamental response against the pandemic but a solution to provide prompt healthcare for the patients in remote sites. Former technologies which measured a couple of vital signs had features that disturbed practical applications to wearable devices, such as heavy power consumption. Here, we suggest an ultralow power (100 μW) sensor that collects all cardiopulmonary vital signs, including blood pressure, heart rate, and the respiration signal. The small and lightweight (2 g) sensor designed to be easily embedded in the flexible wristband generates an electromagnetically reactive near field to monitor the contraction and relaxation of the radial artery. The proposed ultralow power sensor measuring noninvasively continuous and accurate cardiopulmonary vital signs at once will be one of the most promising sensors for wearable devices to bring telehealth to our lives.
| S-EPMC10189444 | biostudies-literature
Project description:BackgroundTechnological advances have enabled continuous monitoring of vital signs (CMVS) by wearable, wireless devices on general hospital wards to facilitate early detection of clinical deterioration, which could potentially improve clinical outcomes. However, evidence on the impact of these CMVS systems on patient outcomes is limited. This research aimed to explore the effect of CMVS on the clinical outcomes in major abdominal surgery patients in a general surgery ward.MethodsA single-centre before-after study was conducted from October 2019 to June 2022. Patients in the intervention group received CMVS in addition to conventional intermittent vital sign monitoring (standard care for control group). With CMVS, heart rate and respiratory rate were measured every 5 min by a patch sensor. Proactive vital signs trends assessments and, when necessary, subsequent nursing activities were performed every nursing shift. The primary outcome of interest was the length of hospital stay (LOS); also, 12 patient-related outcomes were analysed. In the CMVS group, follow-up nursing activities of deviating vital signs trends were described and patient acceptability was measured. Post-hoc subgroup analysis was performed for colorectal and hepatopancreatobiliary surgery.ResultsA total of 908 patients were included (colorectal: n = 650; hepatopancreatobiliary: n = 257). Overall, median LOS was lower in the CMVS group (5.0 versus 5.5 days; P = 0.012), respectively. Post-hoc subgroup analysis showed this reduction in LOS was mostly observed in the colorectal group and not in the hepatopancreatobiliary group. Apart from a decrease in nurse-to-house-officer calls (from 15.3% to 7.7%; P = 0.007), all secondary clinical outcomes were similar in CMVS and control groups. However, a non-significant trend towards less-severe complications and reduced ICU LOS was observed in the CMVS group. In CMVS patients, 109 additional nursing activities were performed and 83% of patients indicated CMVS was acceptable.ConclusionCMVS was associated with a significant reduction in LOS, while other clinical outcomes were unchanged. CMVS triggered additional nursing activities such as extra patient assessments and therapeutic interventions.
| S-EPMC10794900 | biostudies-literature
Project description:The ability to monitor subtle changes in vital and arterial signals using flexible devices attached to the human skin can be valuable for the detection of various health conditions such as cardiovascular disease. Conventional Si device technologies are being utilised in traditional clinical systems; however, its fabrication is not easy owing to the difficulties in adapting to conventional processes. Here, we present the development of a fully printed, wearable, ferroelectric-polymer vital sensor for monitoring the human pulse wave/rate on the skin. This vital sensor is compact, thin, sufficiently flexible, and conforms to the skin while providing high pressure sensitivity, fast response time, superior operational stability, and excellent mechanical fatigue properties. Moreover, the vital sensor is connected to a communication amplifier circuit for monitoring the pulse waves with a wireless sensing system. This sensor system can realise the development of new healthcare devices for wearable sensor applications.
| S-EPMC5849614 | biostudies-literature
Project description:ObjectiveTo create a novel neurological vital sign and reliably capture MS-related limb disability in less than 5 min.MethodsConsecutive patients meeting the 2010 MS diagnostic criteria and healthy controls were offered enrollment. Participants completed finger and foot taps wearing the MYO-band© (accelerometer, gyroscope, and surface electromyogram sensors). Signal processing was performed to extract spatiotemporal features from raw sensor data. Intraclass correlation coefficients (ICC) assessed intertest reproducibility. Spearman correlation and multivariable regression methods compared extracted features to physician- and patient-reported disability outcomes. Partial least squares regression identified the most informative extracted textural features.ResultsBaseline data for 117 participants with MS (EDSS 1.0-7.0) and 30 healthy controls were analyzed. ICCs for final selected features ranged from 0.80 to 0.87. Time-based features distinguished cases from controls (P = 0.002). The most informative combination of extracted features from all three sensors strongly correlated with physician EDSS (finger taps rs = 0.77, P < 0.0001; foot taps rs = 0.82, P < 0.0001) and had equally strong associations with patient-reported outcomes (WHODAS, finger taps rs = 0.82, P < 0.0001; foot taps rs = 0.82, P < 0.0001). Associations remained with multivariable modeling adjusted for age and sex.ConclusionsExtracted features from the multi-sensor demonstrate striking correlations with gold standard outcomes. Ideal for future generalizability, the assessments take only a few minutes, can be performed by nonclinical personnel, and wearing the band is nondisruptive to routine practice. This novel paradigm holds promise as a new neurological vital sign.
| S-EPMC7085995 | biostudies-literature
Project description:A flexible sensor that can be attached to the body to collect vital data wirelessly enables real-time human healthcare management. One potential application for home-use healthcare devices is monitoring of sleep conditions to diagnose sleep apnea syndrome. Such data are not readily gathered using conventional tools, owing to the bulk and cost of instrumentation. In order to monitor respiration at home, it is necessary to improve sensing performance and long-term stability of the sensors without sacrificing wearability and comfortability. To build a platform for wireless home-use respiration monitoring, this study develops a mask-borne flexible humidity sensor using ZnIn2S4 nanosheets as a humidity-sensitive material with high sensitivity and stability for more than 150 h. As proof-of-concept, long-term wireless respiration monitoring is demonstrated during sleep to identify symptoms of sleep apnea in wearers.
| S-EPMC9010767 | biostudies-literature
Project description:The flexible pressure sensor is expected to be applied in the new generation of sports wearable electronic devices. Developing flexible pressure sensors with a wide linear range and great sensitivity, however, remains a significant barrier. In this work, we propose a hybrid conductive elastomeric film oxide-based material with a concave-shape micro-patterned array (P-HCF) on the surface that sustainably shows the necessary sensing qualities. To enhance sensing range and sensitivity, one-dimensional carbon fibers and two-dimensional MXene are incorporated into the polydimethylsiloxane matrix to form a three-dimensional conductive network. Micro-patterns with a curved shape in P-HCFs can be able to linear sensitivity across the sensing range by controlling the pressure distribution inside the material. Besides, the sensitivity of P-HCF pressure sensor can reach 31.92 kPa-1, and meanwhile, the linear band of P-HCF pressure sensor can arrive at 24 Pa-720 kPa, which makes it a good choice for sports monitoring. The designed pressure sensor can be used to monitor the foot pressure during running. By analyzing the gait information during running, it can provide data support and strategy improvement for running. This new dual working mode pressure P-HCF sensor will provide a new way for the development of intelligent sports.
| S-EPMC9978046 | biostudies-literature
Project description:The COVID-19 pandemic has accelerated methods to facilitate contactless evaluation of patients in hospital settings. By minimizing in-person contact with individuals who may have COVID-19, healthcare workers can prevent disease transmission and conserve personal protective equipment. Obtaining vital signs is a ubiquitous task that is commonly done in person by healthcare workers. To eliminate the need for in-person contact for vital sign measurement in the hospital setting, we developed Dr. Spot, a mobile quadruped robotic system. The system includes IR and RGB cameras for vital sign monitoring and a tablet computer for face-to-face medical interviewing. Dr. Spot is teleoperated by trained clinical staff to simultaneously measure the skin temperature, respiratory rate, and heart rate while maintaining social distancing from patients and without removing their mask. To enable accurate, contactless measurements on a mobile system without a static black body as reference, we propose novel methods for skin temperature compensation and respiratory rate measurement at various distances between the subject and the cameras, up to 5 m. Without compensation, the skin temperature MAE is 1.3°C. Using the proposed compensation method, the skin temperature MAE is reduced to 0.3°C. The respiratory rate method can provide continuous monitoring with a MAE of 1.6 BPM in 30 s or rapid screening with a MAE of 2.1 BPM in 10 s. For the heart rate estimation, our system is able to achieve a MAE less than 8 BPM in 10 s measured in arbitrary indoor light conditions at any distance below 2 m.
| S-EPMC9096356 | biostudies-literature
Project description:Current pulse oximeter sensors can be challenged in working accurately and continuously in situations of reduced periphery perfusion, especially among anaesthetised patients. A novel tracheal photoplethysmography (PPG) sensor has been developed in an effort to address the limitations of current pulse oximeters. The sensor has been designed to estimate oxygen saturation (SpO2) and pulse rate, and has been manufactured on a flexible printed circuit board (PCB) that can adhere to a standard endotracheal (ET) tube. A pilot clinical trial was carried out as a feasibility study on 10 anaesthetised patients. Good quality PPGs from the trachea were acquired at red and infrared wavelengths in all patients. The mean SpO2 reading for the ET tube was 97.1% (SD 1.0%) vs. the clinical monitor at 98.7% (SD 0.7%). The mean pulse rate for the ET sensor was 65.4 bpm (SD 10.0 bpm) vs. the clinical monitor at 64.7 bpm (SD 9.9 bpm). This study supports the hypothesis that the human trachea could be a suitable monitoring site of SpO2 and other physiological parameters, at times where the periphery circulation might be compromised.
| S-EPMC6956046 | biostudies-literature
Project description:Huge hospital information system databases can be mined for knowledge discovery and decision support, but artifact in stored non-invasive vital sign (VS) high-frequency data streams limits its use. We used machine-learning (ML) algorithms trained on expert-labeled VS data streams to automatically classify VS alerts as real or artifact, thereby "cleaning" such data for future modeling. 634 admissions to a step-down unit had recorded continuous noninvasive VS monitoring data [heart rate (HR), respiratory rate (RR), peripheral arterial oxygen saturation (SpO2) at 1/20 Hz, and noninvasive oscillometric blood pressure (BP)]. Time data were across stability thresholds defined VS event epochs. Data were divided Block 1 as the ML training/cross-validation set and Block 2 the test set. Expert clinicians annotated Block 1 events as perceived real or artifact. After feature extraction, ML algorithms were trained to create and validate models automatically classifying events as real or artifact. The models were then tested on Block 2. Block 1 yielded 812 VS events, with 214 (26 %) judged by experts as artifact (RR 43 %, SpO2 40 %, BP 15 %, HR 2 %). ML algorithms applied to the Block 1 training/cross-validation set (tenfold cross-validation) gave area under the curve (AUC) scores of 0.97 RR, 0.91 BP and 0.76 SpO2. Performance when applied to Block 2 test data was AUC 0.94 RR, 0.84 BP and 0.72 SpO2. ML-defined algorithms applied to archived multi-signal continuous VS monitoring data allowed accurate automated classification of VS alerts as real or artifact, and could support data mining for future model building.
| S-EPMC4821824 | biostudies-literature
Project description:In recent times, flexible piezoresistive polymer nanocomposite-based strain sensors are in high demand in wearable devices and various new age applications. In the polymer nanocomposite-based strain sensor, the dispersion of conductive nanofiller remains challenging due to the competing requirements of homogenized dispersion of nanofillers in the polymer matrix and retaining of the inherent characteristics of nanofillers. In the present work, waterproof and flexible poly(vinylidene difluoride) (PVDF) with a polymer-functionalized hydrogen-exfoliated graphene (HEG)-based piezoresistive strain sensor is developed and demonstrated. The novelty of the work is the incorporation of polystyrene sulfonate sodium salt (PSS) polymer-functionalized HEG in a PVDF-based flexible piezoresistive strain sensor. The PSS-HEG provides stable dispersion in the hydrophobic PVDF polymer matrix without sacrificing its inherent characteristics. The electrical conductivity of the PVDF/PSS-HEG-based strain sensor is 0.3 S cm-1, which is two orders of magnitude higher than the PVDF/HEG-based strain sensor. Besides, near the percolation region, the PVDF/PSS-HEG shows a maximum gauge factor of 10, which is about two times higher than the PVDF/HEG-based flexible strain sensor and 5-fold higher than the commercially available metallic strain gauge. The enhancement in the gauge factor is due to the stable dispersion of PSS-HEG in the PVDF matrix and electron conjugation caused by the adherence of negatively charged sulfonate functional groups on the HEG. The developed waterproof flexible strain sensor is demonstrated using portable wireless interfacing device for various applications. This work shows that the waterproof flexible PVDF/PSS-HEG-based strain sensor can be a potential alternative to the commercially available metallic strain gauge.
| S-EPMC7288371 | biostudies-literature