Vibration Measurement Method of a String in Transversal Motion by Using a PSD.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang CH
PROVIDER: S-EPMC5539787 | biostudies-other | 2017 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In shape measurement systems using a grating projection method, the phase analysis of a projected grating provides accurate results. The most popular phase analysis method is the phase shifting method, which requires several images for one shape analysis. Therefore, the object must not move during the measurement. The authors previously proposed a new accurate and high-speed shape measurement method, i.e., the one-pitch phase analysis (OPPA) method, which can determine the phase at every point of a single image of an object with a grating projected onto it. In the OPPA optical system, regardless of the distance of the object from the camera, the one-pitch length (number of pixels) on the imaging surface of the camera sensor is always constant. Therefore, brightness data for one pitch at any point of the image can be easily analyzed to determine phase distribution, or shape. This technology will apply to the measurement of objects in motion, including automobiles, robot arms, products on a conveyor belt, and vibrating objects. This paper describes the principle of the OPPA method and example applications for real-time human motion capture and modal analysis of free vibration of a flat cantilever plate after hammering. The results show the usefulness of the OPPA method.
| S-EPMC7435901 | biostudies-literature
Project description:Spirometry is a standard method for assessing lung function. However, its use is challenging in some patients, and it has limitations such as risk of infection and inability to assess regional chest wall motion. A three-dimensional motion capture system using the one-pitch phase analysis (MCO) method can facilitate high precision measurement of moving objects in real-time in a non-contacting manner. In this study, the MCO method was applied to examine thoraco-abdominal (TA) wall motion for assessing pulmonary function. We recruited 48 male participants, and all underwent spirometry and chest wall motion measurement with the MCO method. A significant positive correlation was observed between the vital capacity (Spearman's ρ = 0.68, p < 0.0001), forced vital capacity (Spearman's ρ = 0.62, p < 0.0001), and tidal volume (Spearman's ρ = 0.61, p < 0.0001) of spirometry and the counterpart parameters of MCO method. Moreover, the MCO method could detect regional rib cage and abdomen compartment contributions and could assess TA asynchrony, indicating almost complete synchronous movement (phase angle for each compartment: - 5.05° to 3.86°). These findings suggest that this technique could examine chest wall motion, and may be effective in analyzing chest wall volume changes and pulmonary function.
| S-EPMC8563798 | biostudies-literature
Project description:We introduce an extension to the weighted ensemble (WE) path sampling method to restrict sampling to a one-dimensional path through a high dimensional phase space. Our method, which is based on the finite-temperature string method, permits efficient sampling of both equilibrium and non-equilibrium systems. Sampling obtained from the WE method guides the adaptive refinement of a Voronoi tessellation of order parameter space, whose generating points, upon convergence, coincide with the principle reaction pathway. We demonstrate the application of this method to several simple, two-dimensional models of driven Brownian motion and to the conformational change of the nitrogen regulatory protein C receiver domain using an elastic network model. The simplicity of the two-dimensional models allows us to directly compare the efficiency of the WE method to conventional brute force simulations and other path sampling algorithms, while the example of protein conformational change demonstrates how the method can be used to efficiently study transitions in the space of many collective variables.
| S-EPMC3568092 | biostudies-literature
Project description:An approach to find transition pathways in complex systems is presented. The method, which is related to the string method in collective variables of Maragliano et al. (J. Chem. Phys. 2006, 125, 024106), is conceptually simple and straightforward to implement. It consists of refining a putative transition path in the multidimensional space supported by a set of collective variables using the average dynamic drift of those variables. This drift is estimated on-the-fly via swarms of short unbiased trajectories started at different points along the path. Successive iterations of this algorithm, which can be naturally distributed over many computer nodes with negligible interprocessor communication, refine an initial trial path toward the most probable transition path (MPTP) between two stable basins. The method is first tested by determining the pathway for the C7eq to C7ax transition in an all-atom model of the alanine dipeptide in vacuum, which has been studied previously with the string method in collective variables. A transition path is found with a committor distribution peaked at 1/2 near the free energy maximum, in accord with previous results. Last, the method is applied to the allosteric conformational change in the nitrogen regulatory protein C (NtrC), represented here with a two-state elastic network model. Even though more than 550 collective variables are used to describe the conformational change, the path converges rapidly. Again, the committor distribution is found to be peaked around 1/2 near the free energy maximum between the two stable states, confirming that a genuine transition state has been localized in this complex multidimensional system.
| S-EPMC2757167 | biostudies-literature
Project description:Robots capable of generating adhesion forces that can achieve free movement in application environments while overcoming their own gravity are a subject of interest for researchers. A robot with controllable adhesion could be useful in many engineered systems. Materials processing equipment, robots that climb walls, and pick-and-place machines are some examples. However, most adhesion methods either require a large energy supply system or are limited by the properties of the contact plane. For example, electromagnetic adhesion requires a ferromagnetic surface and pneumatic adhesion requires a flat surface. Furthermore, nearly all existing approaches are only used to generate adhesion forces and often require additional mechanisms to remove the adhesive component from the surface. In this study, we aimed to develop a simpler method of adhering to a surface while simultaneously moving in directions parallel to the surface, using multiple vibration sources to generate normal adhesion and propulsion. To test our approach, we constructed circular and elliptical models and conducted experiments with various inputs and model parameters. Our results show that such a gas-lubricated adhesive disk could achieve adhesive rotation and displacement in the plane without requiring any auxiliary operating system. Using only vibration sources, we were able to generate the necessary adhesion and propulsion forces to achieve the desired motion of the robot. This work represents a step towards the construction of a small-sized tetherless robot that can overcome gravity and move freely in a general environment.
| S-EPMC10642911 | biostudies-literature
Project description:PURPOSE:To develop a novel framework for rapid, intrinsic head motion measurement in MRI using FID navigators (FIDnavs) from a multichannel head coil array. METHODS:FIDnavs encode substantial rigid-body motion information; however, current implementations require patient-specific training with external tracking data to extract quantitative positional changes. In this work, a forward model of FIDnav signals was calibrated using simulated movement of a reference image within a model of the spatial coil sensitivities. A FIDnav module was inserted into a nonselective 3D FLASH sequence, and rigid-body motion parameters were retrospectively estimated every readout time using nonlinear optimization to solve the inverse problem posed by the measured FIDnavs. This approach was tested in simulated data and in 7 volunteers, scanned at 3T with a 32-channel head coil array, performing a series of directed motion paradigms. RESULTS:FIDnav motion estimates achieved mean absolute errors of 0.34?±?0.49?mm and 0.52?±?0.61° across all subjects and scans, relative to ground-truth motion measurements provided by an electromagnetic tracking system. Retrospective correction with FIDnav motion estimates resulted in substantial improvements in quantitative image quality metrics across all scans with intentional head motion. CONCLUSIONS:Quantitative rigid-body motion information can be effectively estimated using the proposed FIDnav-based approach, which represents a practical method for retrospective motion compensation in less cooperative patient populations.
| S-EPMC6258267 | biostudies-literature
Project description:Despite the fundamental nature and practical importance of melting, there is still no generally accepted theory of this ubiquitous phenomenon. Even the earliest simulations of melting of hard discs by Alder and Wainwright indicated the active role of collective atomic motion in melting and here we utilize molecular dynamics simulation to determine whether these correlated motions are similar to those found in recent studies of glass-forming (GF) liquids and other condensed, strongly interacting, particle systems. We indeed find string-like collective atomic motion in our simulations of "superheated" Ni crystals, but other observations indicate significant differences from GF liquids. For example, we observe neither stretched exponential structural relaxation, nor any decoupling phenomenon, while we do find a boson peak, findings that have strong implications for understanding the physical origin of these universal properties of GF liquids. Our simulations also provide a novel view of "homogeneous" melting in which a small concentration of interstitial defects exerts a powerful effect on the crystal stability through their initiation and propagation of collective atomic motion. These relatively rare point defects are found to propagate down the strings like solitons, driving the collective motion. Crystal integrity remains preserved when the permutational atomic motions take the form of ring-like atomic exchanges, but a topological transition occurs at higher temperatures where the rings open to form linear chains similar in geometrical form and length distribution to the strings of GF liquids. The local symmetry breaking effect of the open strings apparently destabilizes the local lattice structure and precipitates crystal melting. The crystal defects are thus not static entities under dynamic conditions, such as elevated temperatures or material loading, but rather are active agents exhibiting a rich nonlinear dynamics that is not addressed in conventional "static" defect melting models.
| S-EPMC3598817 | biostudies-other
Project description:This paper proposes an approximate string matching with k-mismatches when calculating the generalized edit distance. When the edit distance is generalized, more sophisticated string matching can be provided. However, the execution time increases because of the bundle of complex computations for calculating complicated edit distances. The computational costs for finding which steps or edit distances are over k-mismatches cannot be significant in the generalized edit distance metric. Therefore, we can reduce the execution time by determining steps over k-mismatches and then skipping them. The diagonal step calculations using the pruning register skips unnecessary distance calculations over k-mismatches. The overhead of control statements and reordered memory accesses can be amortized by skipping multiple steps. Even though the proposed skipping method requires additional overhead, the proposed scheme's practical embodiments show that the execution time of string matching is reduced significantly when k is small.
| S-EPMC8096107 | biostudies-literature
Project description:Background and aimLiver stiffness measurement (LSM) and spleen stiffness measurement (SSM@50 Hz) using standard vibration-controlled transient elastography (VCTE) have been studied as a noninvasive test for screening of gastroesophageal varices (GEV) in chronic liver disease (CLD). Recently, a novel spleen-dedicated VCTE (SSM@100 Hz) has been developed. We evaluated the diagnostic performance of SSM@100 Hz, SSM@50 Hz, LSM, and other noninvasive tests using esophagogastroduodenoscopy (EGD) as the reference as well as the correlation with hepatic venous pressure gradient (HVPG).MethodsA total of 123 patients with CLD enrolled in this cross-sectional study. SSM@100 Hz, SSM@50 Hz, and LSM were determined by VCTE. EGD and HVPG were performed within 12 weeks before or after VCTE.ResultsGEV were present in 60 patients. Failure or suboptimal SSM were fewer at 100 Hz (4.0%) than at 50 Hz (17.7%). All SSM values obtained at 100 Hz were lower than the 100 kPa ceiling threshold, but 10 patients reached the 75 kPa ceiling threshold for SSM@50 Hz. SSM@100 Hz was most accurate (area under the receiver operating characteristic [AUROC] = 0.944) for the diagnosis of GEV compared to SSM@50 Hz, LSM, and scoring systems. AUROC of SSM@100 Hz for diagnosis of high-bleeding risk varices (HRV) was 0.941, which was significantly higher than that of SSM@50 Hz (AUROC = 0.842, P = 0.002). SSM@100 Hz showed higher specificity (82.0%) for diagnosis of HRV than SSM@50 Hz (specificity = 67.1%). SSM@100 Hz was significantly correlated with HVPG (r = 0.71, P < 0.001).ConclusionsThe novel spleen-dedicated VCTE examination can be used for noninvasive assessment of GEV and HVPG in CLD. Japan Registry of Clinical Trials Registry No. jRCTs032200119.
| S-EPMC8762624 | biostudies-literature
Project description:AimsPostsynaptic density - 95 kDa protein (PSD95) is an important molecule on the postsynaptic membrane. It interacts with many other proteins and plays a pivotal role in learning and memory formation. Its distribution in the brain has been studied previously using in situ hybridization as well as immunohistochemistry. However, these studies are based on 2 dimensional (2D) sections and results are presented with a few sections. The present study aims to show PSD-95 distribution in 3 dimensions (3D) without slicing the brain tissue of C57BL/6 mice into sections using the advanced CUBIC technique.MethodsImmunofluorescent staining using a PSD-95 antibody was performed on a half of the mouse brain after clarifying it using the advanced CUBIC protocol. The brain tissue was imaged using a Zeiss Z1 light sheet microscope and 3D reconstruction was completed using the Arivis Vision 4 dimensional (4D) software.ResultsThe majority of brain nuclei have similar distribution pattern to what has been reported from in situ hybridization and immunohistochemical studies in the mouse. The signal can be easily followed in the 3D and their spatial relationship with adjacent structures clearly demarcated. In the present study, some fiber bundles also showed strong PSD-95 signal, which is different from what was shown in previous studies and need to be confirmed in future studies.
| S-EPMC6134724 | biostudies-literature