Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras.
Ontology highlight
ABSTRACT:
SUBMITTER: Liao Y
PROVIDER: S-EPMC5539808 | biostudies-other | 2017 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:PurposeOptical prospective motion correction substantially reduces sensitivity to motion in neuroimaging of human subjects. However, a major barrier to clinical deployment has been the time-consuming cross-calibration between the camera and MRI scanner reference frames. This work addresses this challenge.MethodsA single camera was mounted onto the head coil for tracking head motion. Two new methods were developed: (1) a rapid calibration method for camera-to-scanner cross-calibration using a custom-made tool incorporating wireless active markers, and (2) a calibration adjustment method to compensate for table motion between scans. Both methods were tested at 1.5T and 3T in vivo. Simulations were performed to determine the required mechanical tolerance for repositioning of the camera.ResultsThe rapid calibration method is completed in a short (<30 s) scan, which is carried out only once per installation. The calibration adjustment method requires no extra scan time and runs automatically whenever the system is used. The mechanical tolerance analysis indicates that most motion (90% reduction in voxel displacement) could be corrected even with far larger camera repositioning errors than are observed in practice.ConclusionThe methods presented here allow calibration of sufficient quality to be carried out and maintained with no additional technologist workload. Magn Reson Med 79:1911-1921, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
| S-EPMC5899426 | biostudies-literature
Project description:This paper presents the software application ORION (All-sky camera geOmetry calibRation from star positIONs). This software has been developed with the aim of providing geometrical calibration to all-sky cameras, i.e. assess which sky coordinates (zenith and azimuth angles) correspond to each camera pixel. It is useful to locate bodies over the celestial vault, like stars and planets, in the camera images. The user needs to feed ORION with a set of cloud-free sky images captured at night-time for obtaining the calibration matrices. ORION searches the position of various stars in the sky images. This search can be automatic or manual. The sky coordinates of the stars and the corresponding pixel positions in the camera images are used together to determine the calibration matrices. The calibration is based on three parameters: the pixel position of the sky zenith in the image; the shift angle of the azimuth viewed by the camera with respect to the real North; and the relationship between the sky zenith angle and the pixel radial distance regards to the sky zenith in the image. In addition, ORION includes other features to facilitate its use, such as the check of the accuracy of the calibration. An example of ORION application is shown, obtaining the calibration matrices for a set of images and studying the accuracy of the calibration to predict a star position. Accuracy is about 9.0 arcmin for the analyzed example using a camera with average resolution of 5.4 arcmin/pixel (about 1.7 pixels).
| S-EPMC8970509 | biostudies-literature
Project description:Historically, probabilistic models for decision support have focused on discrimination, e.g., minimizing the ranking error of predicted outcomes. Unfortunately, these models ignore another important aspect, calibration, which indicates the magnitude of correctness of model predictions. Using discrimination and calibration simultaneously can be helpful for many clinical decisions. We investigated tradeoffs between these goals, and developed a unified maximum-margin method to handle them jointly. Our approach called, Doubly Optimized Calibrated Support Vector Machine (DOC-SVM), concurrently optimizes two loss functions: the ridge regression loss and the hinge loss. Experiments using three breast cancer gene-expression datasets (i.e., GSE2034, GSE2990, and Chanrion's datasets) showed that our model generated more calibrated outputs when compared to other state-of-the-art models like Support Vector Machine (p=0.03, p=0.13, and p<0.001) and Logistic Regression (p=0.006, p=0.008, and p<0.001). DOC-SVM also demonstrated better discrimination (i.e., higher AUCs) when compared to Support Vector Machine (p=0.38, p=0.29, and p=0.047) and Logistic Regression (p=0.38, p=0.04, and p<0.0001). DOC-SVM produced a model that was better calibrated without sacrificing discrimination, and hence may be helpful in clinical decision making.
| S-EPMC3490990 | biostudies-literature
Project description:The possible increased risk of dislocation with a posterior approach for femoral hemiarthroplasty is attributed to disruption of the posterior soft-tissue structures, including the posterior capsular ligament structure and short external rotators of the hip. In this surgical technical note, we demonstrate the surgical technique for shoelace suturing of the external rotators and the capsule with use of ULTRATAPE. After prosthesis stem insertion, shoelace suturing using ULTRATAPE was performed between the great trochanter and the external rotators for preventing the external rotators from tearing. Also, ULTRATAPE was sewed alternately on the split capsule like shoe lacing, and it was laced up from proximal to distal in line with the split as shoelaces tied down. The shoelace suturing technique using ULTRATAPE after a posterior approach to the hip joint, possibly lowers risks of tearing hip capsular ligament and external rotators and stabilizes the posterior wall.
| S-EPMC6123172 | biostudies-literature
Project description:Human poses are difficult to estimate due to the complicated body structure and the self-occlusion problem. In this paper, we introduce a marker-less system for human pose estimation by detecting and tracking key body parts, namely the head, hands, and feet. Given color and depth images captured by multiple red, green, blue, and depth (RGB-D) cameras, our system constructs a graph model with segmented regions from each camera and detects the key body parts as a set of extreme points based on accumulative geodesic distances in the graph. During the search process, local detection using a supervised learning model is utilized to match local body features. A final set of extreme points is selected with a voting scheme and tracked with physical constraints from the unified data received from the multiple cameras. During the tracking process, a Kalman filter-based method is introduced to reduce positional noises and to recover from a failure of tracking extremes. Our system shows an average of 87% accuracy against the commercial system, which outperforms the previous multi-Kinects system, and can be applied to recognize a human action or to synthesize a motion sequence from a few key poses using a small set of extremes as input data.
| S-EPMC6263766 | biostudies-literature
Project description:A comprehensive and hierarchical optimization of a joint hydrogen and syngas combustion mechanism has been carried out. The Kéromnès et al. (Combust Flame, 2013, 160, 995-1011) mechanism for syngas combustion was updated with our recently optimized hydrogen combustion mechanism (Varga et al., Proc Combust Inst, 2015, 35, 589-596) and optimized using a comprehensive set of direct and indirect experimental data relevant to hydrogen and syngas combustion. The collection of experimental data consisted of ignition measurements in shock tubes and rapid compression machines, burning velocity measurements, and species profiles measured using shock tubes, flow reactors, and jet-stirred reactors. The experimental conditions covered wide ranges of temperatures (800-2500 K), pressures (0.5-50 bar), equivalence ratios (ϕ = 0.3-5.0), and C/H ratios (0-3). In total, 48 Arrhenius parameters and 5 third-body collision efficiency parameters of 18 elementary reactions were optimized using these experimental data. A large number of directly measured rate coefficient values belonging to 15 of the reaction steps were also utilized. The optimization has resulted in a H2/CO combustion mechanism, which is applicable to a wide range of conditions. Moreover, new recommended rate parameters with their covariance matrix and temperature-dependent uncertainty ranges of the optimized rate coefficients are provided. The optimized mechanism was compared to 19 recent hydrogen and syngas combustion mechanisms and is shown to provide the best reproduction of the experimental data.
| S-EPMC5084827 | biostudies-literature
Project description:We present the SurfacE Electromyographic with hanD kinematicS (SEEDS) database. It contains electromyographic (EMG) signals and hand kinematics recorded from the forearm muscles of 25 non-disabled subjects while performing 13 different movements at normal and slow-paced speeds. EMG signals were recorded with a high-density 126-channel array centered on the extrinsic flexors of the fingers and 8 further electrodes placed on the extrinsic extensor muscles. A data-glove was used to record 18 angles from the joints of the wrist and fingers. The correct synchronisation of the data-glove and the EMG was ascertained and the resulting data were further validated by implementing a simple classification of the movements. These data can be used to test experimental hypotheses regarding EMG and hand kinematics. Our database allows for the extraction of the neural drive as well as performing electrode selection from the high-density EMG signals. Moreover, the hand kinematic signals allow the development of proportional methods of control of the hand in addition to the more traditional movement classification approaches.
| S-EPMC6768861 | biostudies-literature
Project description:Genome-wide association studies (GWAS) have successfully revealed many disease-associated genetic variants. For a case-control study, the adequate power of an association test can be achieved with a large sample size, although genotyping large samples is expensive. A cost-effective strategy to boost power is to integrate external control samples with publicly available genotyped data. However, the naive integration of external controls may inflate the type I error rates if ignoring the systematic differences (batch effect) between studies, such as the differences in sequencing platforms, genotype-calling procedures, population stratification, and so forth. To account for the batch effect, we propose an approach by integrating External Controls into the Association Test by Regression Calibration (iECAT-RC) in case-control association studies. Extensive simulation studies show that iECAT-RC not only can control type I error rates but also can boost statistical power in all models. We also apply iECAT-RC to the UK Biobank data for M72 Fibroblastic disorders by considering genotype calling as the batch effect. Four SNPs associated with fibroblastic disorders have been detected by iECAT-RC and the other two comparison methods, iECAT-Score and Internal. However, our method has a higher probability of identifying these significant SNPs in the scenario of an unbalanced case-control association study.
| S-EPMC10815702 | biostudies-literature
Project description:Models of macromolecular assemblies are essential for a mechanistic description of cellular processes. Such models are increasingly obtained by fitting atomic-resolution structures of components into a density map of the whole assembly. Yet, current density-fitting techniques are frequently insufficient for an unambiguous determination of the positions and orientations of all components. Here, we describe MultiFit, a method used for simultaneously fitting atomic structures of components into their assembly density map at resolutions as low as 25 A. The component positions and orientations are optimized with respect to a scoring function that includes the quality-of-fit of components in the map, the protrusion of components from the map envelope, and the shape complementarity between pairs of components. The scoring function is optimized by our exact inference optimizer DOMINO (Discrete Optimization of Multiple INteracting Objects) that efficiently finds the global minimum in a discrete sampling space. MultiFit was benchmarked on seven assemblies of known structure, consisting of up to seven proteins each. The input atomic structures of the components were obtained from the Protein Data Bank, as well as by comparative modeling based on a 16-99% sequence identity to a template structure. A near-native configuration was usually found as the top-scoring model. Therefore, MultiFit can provide initial configurations for further refinement of many multicomponent assembly structures described by electron microscopy.
| S-EPMC2680734 | biostudies-literature
Project description:Tuning and calibration are processes for improving the representativeness of a computer simulation code to a physical phenomenon. This article introduces a statistical methodology for simultaneously determining tuning and calibration parameters in settings where data are available from a computer code and the associated physical experiment. Tuning parameters are set by minimizing a discrepancy measure while the distribution of the calibration parameters are determined based on a hierarchical Bayesian model. The proposed Bayesian model views the output as a realization of a Gaussian stochastic process with hyperpriors. Draws from the resulting posterior distribution are obtained by the Markov chain Monte Carlo simulation. Our methodology is compared with an alternative approach in examples and is illustrated in a biomechanical engineering application. Supplemental materials, including the software and a user manual, are available online and can be requested from the first author.
| S-EPMC2879656 | biostudies-literature