Dataset Information

Comparison of low density and high density pedicle screw instrumentation in Lenke 1 adolescent idiopathic scoliosis.

ABSTRACT: The correlation between implant density and deformity correction has not yet led to a precise conclusion in adolescent idiopathic scoliosis (AIS). The aim of this study was to evaluate the effects of low density (LD) and high density (HD) pedicle screw instrumentation in terms of the clinical, radiological and Scoliosis Research Society (SRS)-22 outcomes in Lenke 1 AIS.We retrospectively reviewed 62 consecutive Lenke 1 AIS patients who underwent posterior spinal arthrodesis using all-pedicle screw instrumentation with a minimum follow-up of 24 months. The implant density was defined as the number of screws per spinal level fused. Patients were then divided into two groups according to the average implant density for the entire study. The LD group (n = 28) had fewer than 1.61 screws per level, while the HD group (n = 34) had more than 1.61 screws per level. The radiographs were analysed preoperatively, postoperatively and at final follow-up. The perioperative and SRS-22 outcomes were also assessed. Independent sample t tests were used between the two groups.Comparisons between the two groups showed no significant differences in the correction of the main thoracic curve and thoracic kyphosis, blood transfusion, hospital stay, and SRS-22 scores. Compared with the HD group, there was a decreased operating time (278.4 vs. 331.0 min, p = 0.004) and decreased blood loss (823.6 vs. 1010.9 ml, p = 0.048), pedicle screws needed (15.1 vs. 19.6, p < 0.001), and implant costs ($10,191.0 vs. $13,577.3, p = 0.003) in the LD group.Both low density and high density pedicle screw instrumentation achieved satisfactory deformity correction in Lenke 1 AIS patients. However, the operating time and blood loss were reduced, and the implant costs were decreased with the use of low screw density constructs.

SUBMITTER: Shen M

PROVIDER: S-EPMC5541645 | biostudies-other | 2017 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:The expectations of both the patient and surgeon have been greatly revised in the last 10 years with the introduction of pedicle screws (PS) in spinal surgery. In this study, we have retrospectively evaluated and compared the results of PS instrumentation and the Hybrid System (HS), the latter consists of pedicle screws, sublaminar wire and hooks. The mean follow-up period was 60.1 months (range: 49-94 months) for the patients of the HS group and 29.3 months (range: 24-35 months) for those of the PS group. In the HS group, pedicle screws were used at the thoracolumbar junction and lumbar vertebra, the bilateral pediculotransverse claw hook configuration was used at the cranial end of the instrumentation, sublaminar wire was used on the concave side of the apical region and the compressive hook was used on the convex side. In the PS group, PS were used on the concave sides at all levels and on the convex side of the cranial and caudal end of instrumentation, in the transition zone and at the apex. The two groups were comparable for variables such as mean age, preoperative Cobb angle, thoracic kyphosis angle, lordosis angle, coronal balance, flexibility of the curve, apical vertebra rotation (AVR), apical vertebra rotation (AVT) and the number of vertebrae included in the fusion (p>0.05). The parameters of values of correction, ratio of correction loss, AV derotation, AVT correction ratio, amount of blood loss, operation time, postoperative global coronal and sagittal balance, thoracic kyphosis angle and lumbar lordosis angle were measured at the last follow-up and used for comparing the HS and PS groups. There was no statistically significant difference between the groups for correction ratio, postoperative coronal balance, postoperative thoracic kyphosis and lumbar lordosis angle, operation time, amount of blood loss and number of fixation points (p>0.05) The difference for the ratio of correction loss, AV derotation angle and the AVT correction ratio at the last follow-up visit and for the total follow-up period between the groups was found to be statistically significant (p<0.05). Although it is possible to obtain a similar amount of correction by either instrumentation system, the loss of correction seems to be lower with the more rigid PS construction. The PS system also has a stronger effect on vertebral bodies, thereby providing better AV de-rotation. There was no significant difference (p>0.05) between the groups in terms of correction rate, postoperative coronal and sagittal balance, operation time, blood loss and number of fixation points. This may indicate that anchor points are more important than the use--or not--of screws. Correction durability and AV de-rotation was better with PS instrumentation, while AVT was better corrected by HS instrumentation (p<0.05). We propose that the reason for the better correction of AVT with HS instrumentation is the forceful translation offered by the sublaminar wire at the apical region, while the reason for the better correction durability of the PS instrumentation may be due to the fact that multiple pedicle screws which afford three-column control are better at maintaining the correction and preventing late deterioration.

Project description:BackgroundCurrent methods of measuring vertebral rotation by plain radiographs rely on anatomic landmarks that are not present in the postoperative spine or require advanced imaging. Furthermore, there are few studies on the incidence of crankshaft with modern pedicle instrumentation.Questions/purposesWe sought to (1) describe and validate a method of vertebral rotation measurement using plain radiographs and (2) measure postoperative rotation in a series of patients treated for adolescent idiopathic scoliosis.MethodsPatients with adolescent idiopathic scoliosis treated with surgery over a 6-year period were reviewed. Patients with computed tomography (CT) scans and radiographs within 60 days of another were included. Vertebral rotation was calculated by radiographic measurements and measured directly by CT scan. As an internal control, patients with two apical pedicle screws on all radiographs were analyzed. Rotation was measured for all patients with at least 1 year of radiographic follow-up.ResultsThree thousand five hundred fifty-two instrumented spinal levels in 308 consecutive patients were reviewed. Ten patients with 93 screws were analyzed by CT and radiographs. The average discrepancy between computed tomography (CT) and radiographs was 3.3?±?1.9°, with 81.7% (76/93) within 5°. Intra- and inter-rater reliabilities for measured axial rotation were excellent (intra-class correlation coefficient (ICC)?=?0.879 and 0.900, respectively). One hundred swventy-eight patients were eligible with an average follow-up of 2.3?±?1.2 years; 84.8% (151/178) had screw(s) visible on all images at the major curve apex. The average postsurgical rotation was 3.5?±?2.9°; 19.2% (29/151) were measured to have a rotation over 5°, and 4.0% (6/151) demonstrated a rotation over 10°. Only 4.6% (7/151) of patients demonstrated a postoperative Cobb angle change over 10°.ConclusionsMost major curves have apical pedicle screw instrumentation that can be followed by radiographs alone to measure rotation. Vertebral rotation measurement requires only plain radiographs and is a more sensitive determination for subtle postoperative crankshaft than change in Cobb angle.

Project description:Study designRetrospective study.ObjectiveTo evaluate the radiological results of fusion with segmental pedicle screw fixation in juvenile idiopathic scoliosis with a minimum 5-year follow-up.Summary of background dataProgression of spinal deformity after posterior instrumentation and fusion in immature patients has been reported by several authors. Segmental pedicle screw fixation has been shown to be effective in controlling both coronal and sagittal plane deformities. However, there is no long term study of fusion with segmental pedicle screw fixation in these group of patients.MethodsSeven patients with juvenile idiopathic scoliosis treated by segmental pedicle screw fixation and fusion were analyzed. The average age of the patients was 7.4 years (range 5-9 years) at the time of the operation. All the patients were followed up 5 years or more (range 5-8 years) and were all Risser V at the most recent follow up. Three dimensional reconstruction of the radiographs was obtained and 3DStudio Max software was used for combining, evaluating and modifying the technical data derived from both 2d and 3d scan data.ResultsThe preoperative thoracic curve of 56 +/- 15 degrees was corrected to 24 +/- 17 degrees (57% correction) at the latest follow-up. The lumbar curve of 43 +/- 14 degrees was corrected to 23 +/- 6 degrees (46% correction) at the latest follow-up. The preoperative thoracic kyphosis of 37 +/- 13 degrees and the lumbar lordosis of 33 +/- 13 degrees were changed to 27 +/- 13 degrees and 42 +/- 21 degrees , respectively at the latest follow-up. None of the patients showed coronal decompensation at the latest follow-up. Four patients had no evidence of crankshaft phenomenon. In two patients slight increase in Cobb angle at the instrumented segments with a significant increase in AVR suggesting crankshaft phenomenon was seen. One patient had a curve increase in both instrumented and non instrumented segments due to incorrect strategy.ConclusionIn juvenile idiopathic curves of Risser 0 patients with open triradiate cartilages, routine combined anterior fusion to prevent crankshaft may not be warranted by posterior segmental pedicle screw instrumentation.

Project description:BACKGROUND: In idiopathic scoliosis patients, after anterior spinal fusion and instrumentation, the discs (interspace angle) between the lowest instrumented vertebra (LIV) and the next caudal vertebra became more wedged. We reviewed these patients and analyzed the changes of the angle. METHODS: By reviewing the medical records and roentgenograms of adolescent idiopathic scoliosis patients underwent anterior spinal fusion and instrumentation, Cobb angle of the curve, correction rate, coronal balance, LIV rotation, interspace angle were measured and analyzed. RESULTS: There were total 30 patients included. The mean coronal Cobb angle of the main curve (thoracolumbar/lumbar curve) before and after surgery were 48.9 degrees and 11.7 degrees , respectively, with an average correction rate of 76.1%. The average rotation of LIV before surgery was 2.1 degree, and was improved to 1.2 degree after surgery. The interspace angle before surgery, on convex side-bending films, after surgery, at final follow up were 3.2 degrees , -2.3 degrees , 1.8 degrees and 4.9 degrees , respectively. The difference between the interspace angle after surgery and that preoperatively was not significant (P = 0.261), while the interspace angle at final follow-up became larger than that after surgery, and the difference was significant(P = 0.012). The interspace angle after surgery was correlated with that on convex side-bending films (r = 0.418, P = 0.022), and the interspace angle at final follow-up was correlated with that after surgery (r = 0.625, P = 0.000). There was significant correlation between the loss of the interspace angle and the loss of coronal Cobb angle of the main curve during follow-up(r = 0.483, P = 0.007). CONCLUSION: The interspace angle could be improved after anterior correction and instrumentation surgery, but it became larger during follow-up. The loss of the interspace angle was correlated with the loss of coronal Cobb angle of the main curve during follow-up.

Dataset Information

Comparison of low density and high density pedicle screw instrumentation in Lenke 1 adolescent idiopathic scoliosis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets