Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure and Photoluminescence Properties of Sm3+ Ion-Doped YInGe₂O₇ Phosphor.

ABSTRACT: A new phosphor, Sm3+ ion-doped YInGe₂O₇, was synthesized using a planetary ball mill solid state reaction. The XRD patterns show that all of the peaks can be attributed to the monoclinic YInGe₂O7 crystal structure when the Sm3+ ion concentration is increased up to 20 mol %. Under an excitation wavelength of 404 nm, the Sm3+ intra-4f transition appears in the emission spectrum including two stronger emission peaks located at 560-570 nm and 598 nm correspond to the 4G5/2 → ⁶H5/2 and ⁴G5/2 → ⁶H7/2 transitions, respectively, and another weak emission peak located at 645 nm is due to the ⁴G5/2 → ⁶H9/2 transition. The decay time decreases from 4.5 to 0.8 ms as Sm3+ ion concentrations increase from 1 to 20 mol %, and the decay mechanism of the ⁴G5/2 → ⁶H7/2 transition is a single decay component between Sm3+ ions only. The concentration quenching effect occurs when the Sm3+ ion concentration is higher than 3 mol %. The CIE color coordinate of Y0.97Sm0.03InGe₂O₇ phosphor is at x = 0.457 and y = 0.407, which is located in the orange-yellow light region.

SUBMITTER: Shih HR

PROVIDER: S-EPMC5551822 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Incommensurately Modulated Crystal Structure and Photoluminescence Properties of Eu2O3- and P2O5-Doped Ca2SiO4 Phosphor.

Project description:We prepared four types of Eu2O3- and P2O5-doped Ca2SiO4 phosphors with different phase compositions but identical chemical composition, the chemical formula of which was (Ca1.950Eu3+0.013?0.037)(Si0.940P0.060)O4 (? denotes vacancies in Ca sites). One of the phosphors was composed exclusively of the incommensurate (IC) phase with superspace group Pnma(0?0)00s and basic unit-cell dimensions of a = 0.68004(2) nm, b = 0.54481(2) nm, and c = 0.93956(3) nm (Z = 4). The crystal structure was made up of four types of ?-Ca2SiO4-related layers with an interlayer. The incommensurate modulation with wavelength of 4.110 × b was induced by the long-range stacking order of these layers. When increasing the relative amount of the IC-phase with respect to the coexisting ?-phase, the red light emission intensity, under excitation at 394 nm, steadily decreased to reach the minimum, at which the specimen was composed exclusively of the IC-phase. The coordination environments of Eu3+ ion in the crystal structures of ?- and IC-phases might be closely related to the photoluminescence intensities of the phosphors.

| S-EPMC6982207 | biostudies-literature

Structure and photoluminescence of Eu3+ doped Sr2InTaO6 red phosphor with high color purity.

Project description:The Eu3+-doped Sr2InTaO6 phosphors were obtained by solid-state reaction method and the phase purity of Sr2InTaO6:Eu3+ samples were investigated by the XRD patterns. The Rietveld refinements were conducted to further obtain crystal structure information and the results indicate Sr2InTaO6:Eu3+ samples crystallized in the monoclinic system with a P 121 space group. The optical band gap of Sr2InTaO6 was calculated to be 3.84 eV by the diffuse reflectance spectra, which are consistent with the result (3.823 eV) of density functional theory. Under 396 nm excitation, the Sr2InTaO6:Eu3+ phosphor showed a red photoluminescence band centered at about 624 nm due to the 5D0 → 7F2 transition. Monitored at 624 nm, the phosphors showed two wide bands from 200 nm to 500 nm, which originated from the charge-transfer band of Eu3+-O2- and f-f transitions of Eu3+ ions. The optimum luminous concentration is 0.12 because of the concentration quenching determined to be a quadrupole-quadrupole interaction. The luminescence decay lifetimes of the Sr2InTaO6:Eu3+ phosphors were milliseconds. Significantly, the temperature-dependent emission spectra of Sr2InTaO6:0.12Eu3+ phosphors exhibited good thermal stability and the CIE chromaticity coordinates of Sr2InTaO6:0.12Eu3+ were (0.6265, 0.3693) with high color purity. The present work demonstrated that the Sr2InTaO6:Eu3+ red-emitting phosphors show great application in lighting technology.

| S-EPMC8695113 | biostudies-literature

Variation of Structure and Photoluminescence Properties of Ce3+ Doped MgAlON Transparent Ceramics with Different Doping Content.

Project description:Transparent MgAlON:Ce fluorescent ceramics with doping content of 0.005, 0.01, and 0.02 at % were fabricated by pressureless sintering. All the samples were dense and large in grain size. Under the excitation of 320 nm UV, the samples emitted blue lights centered around 410 nm. The 0.005 and 0.01 at % Ce3+ doped samples were single phase by XRD detection, and possessed good optical and mechanical properties, and luminous thermal stability. The fluorescence lifetime, the CL and PL spectra analysis, indicated that most of the luminous centers were segregated in GB, and there was still a small part of second phase existing in 0.01 at % Ce3+ doped sample, which revealed that spectroscopy methods possessed better sensitivity in smaller scale and lower concentration detection than XRD. As the doping content increasing to 0.02 at %, a mass of second phase arose, which resulted in the optical transparency, mechanical property, luminous thermal stability decline, and the PL spectra red shift by the formation of second phase. It revealed that the performances were fatally deteriorated by excess doping of Ce3+ ions.

| S-EPMC5551835 | biostudies-other

Combustion Synthesis and Photoluminescence Properties of Red-Emitting CaAlSiN₃:Eu2+ Phosphor for White-LEDs.

Project description:A combustion synthesis method has been developed for synthesis of Eu2+ doped CaAlSiN₃ phosphor and its photoluminescence properties were investigated. Ca, Al, Si, and Eu₂O₃ powders were used as the Ca, Al, Si and Eu sources. The addition of NaN₃, NH₄Cl and Si₃N₄ powders was found to increase significantly the product yield. These powders were mixed and pressed into a compact, which was then wrapped up with an igniting agent (i.e., Mg+Fe₃O₄). The compact was ignited by electrical heating under a N₂ pressure of ≤1.0 MPa. Effects of these experimental parameters on the product yield were investigated and a reaction mechanism was proposed. The synthesized CaAlSiN₃:Eu2+ phosphor absorbs light in the region of 200-600 nm and shows a broad band emission in the region of 500-800 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu2+. The sample doped with Eu2+ at the optimized molar ratio of 0.04 is efficiently excited by the blue light (460 nm) and generates emission peaking at ~650 nm with peak emission intensity ~106% of a commercially available phosphor, YAG:Ce3+(P46-Y3).The internal quantum efficiency of the synthesized phosphor was measured to be 71%, compared to 69% of the YAG:Ce3+ (P46-Y3).

| S-EPMC5456445 | biostudies-other

Effects of Ca Content on Formation and Photoluminescence Properties of CaAlSiN₃:Eu2+ Phosphor by Combustion Synthesis.

Project description:Effects of Ca content (in the reactant mixture) on the formation and the photoluminescence properties of CaAlSiN₃:Eu2+ phosphor (CASIN) were investigated by a combustion synthesis method. Ca, Al, Si, Eu₂O₃, NaN₃, NH₄Cl and Si₃N₄ powders were used as the starting materials and they were mixed and pressed into a compact which was then wrapped up with an igniting agent (i.e., Mg + Fe₃O₄). The compact was ignited by electrical heating under a N₂ pressure of ≤1.0 MPa. By keeping the molar ratios of Al and Si (including the Si powder and the Si in Si₃N₄ powder) both at 1.00 and that of Eu₂O₃ at 0.02, XRD (X-ray diffraction) coupled with TEM-EDS (transmission electron microscope equipped with an energy-dispersive X-ray spectroscope) and SAED (selected area electron diffraction) measurements show that AlN:Eu2+ and Ca-α-SiAlON:Eu2+ are formed as the major phosphor products when the Ca molar ratio (denoted by Y) is equal to 0.25 and AlN:Eu2+ and Ca-α-SiAlON:Eu2+ could not be detected at Y ≥ 0.75 and ≥1.00, respectively. CASIN (i.e., CaAlSiN₃:Eu2+) becomes the only phosphor product as Y is increased to 1.00 and higher. The extent of formation of CASIN increases with increasing Y up to 1.50 and begins to decrease as Y is further increased to 1.68. While the excitation wavelength regions are similar at various Y, the emission wavelength regions vary significantly as Y is increased from 0.25 to 1.00 due to different combinations of phosphor phases formed at different Y. The emission intensity of CASIN was found to vary with Y in a similar trend to its extent of formation. The Ca and Eu contents (expressed as molar ratios) in the synthesized products were found to increase roughly with increasing Y but were both lower than the respective Ca and Eu contents in the reactant mixtures.

| S-EPMC5456672 | biostudies-other

Divalent europium-doped near-infrared-emitting phosphor for light-emitting diodes.

Project description:Near-infrared luminescent materials exhibit unique photophysical properties that make them crucial components in photonic, optoelectronic and biological applications. As broadband near infrared phosphors activated by transition metal elements are already widely reported, there is a challenge for next-generation materials discovery by introducing rare earth activators with 4f-5d transition. Here, we report an unprecedented phosphor K3LuSi2O7:Eu2+ that gives an emission band centered at 740 nm with a full-width at half maximum of 160 nm upon 460 nm blue light excitation. Combined structural and spectral characterizations reveal a selective site occupation of divalent europium in LuO6 and K2O6 polyhedrons with small coordination numbers, leading to the unexpected near infrared emission. The fabricated phosphor-converted light-emitting diodes have great potential as a non-visible light source. Our work provides the design principle of near infrared emission in divalent europium-doped inorganic solid-state materials and could inspire future studies to further explore near-infrared light-emitting diodes.

| S-EPMC6868216 | biostudies-literature

Research on the photoluminescence properties of Cu2+-doped perovskite CsPbCl3 quantum dots.

Project description:CsPbX3 (X = Cl, Br, and I) quantum dots (QDs) and Cu2+-doped CsPbCl3 QDs with different Cu-to-Pb molar ratios were synthesized via a solvent-based thermal synthesis method. The photoluminescence (PL) properties of these Cu2+-doped CsPbCl3 QDs were also investigated in this study. The results showed that with the increase in the Cl- concentration the surface defects of CsPb(Cl/Br)3 QDs increased, which resulted in an increase in the non-radiative recombination of excitons and weakened the PL intensity. Moreover, Cu2+-doped CsPbCl3 QDs maintained the cubic crystal structure of the initial phases. Owing to the doping of Cu2+ ions, the surface defects of CsPbCl3 QDs were effectively eliminated, which facilitated the excitonic recombination via a radiative pathway. The PL quantum yields (PLQYs) of Cu2+-doped CsPbCl3 QDs were increased to 51%, showing great photostability. From the results, it is believed that Cu:CsPbCl3 QDs can be widely used in optoelectronic devices.

| S-EPMC8695195 | biostudies-literature

AgCl-doped CdSe quantum dots with near-IR photoluminescence.

Project description:We report the synthesis of colloidal CdSe quantum dots doped with a novel Ag precursor: AgCl. The addition of AgCl causes dramatic changes in the morphology of synthesized nanocrystals from spherical nanoparticles to tetrapods and finally to large ellipsoidal nanoparticles. Ellipsoidal nanoparticles possess an intensive near-IR photoluminescence ranging up to 0.9 eV (ca. 1400 nm). In this article, we explain the reasons for the formation of the ellipsoidal nanoparticles as well as the peculiarities of the process. The structure, Ag content, and optical properties of quantum dots are also investigated. The optimal conditions for maximizing both the reaction yield and IR photoluminescence quantum yield are found.

| S-EPMC5480357 | biostudies-literature

Enhancing Photoluminescence Spectra for Doped ZnO Using Neutron Irradiation.

Project description:This study investigates the effect of neutron irradiation on zinc oxide (ZnO) crystal bulk substrates that have been ion-implanted with gadolinium (Gd) and iron (Fe) in different concentrations in the Zn-polar (0001) face of the crystal to produce Gd:ZnO and Fe:ZnO crystal bulk samples. The neutron beams of the 241Am-Be flux were moderated to be 7 × 104 n/s cm2 by a 4.5 cm-thick wax. The implanted face was left to face the neutron beams on top of the wax for 90 h. The results show that the nuclear reaction between thermal neutrons and the implanted material produced a large amount of heat, which significantly enhanced the photoluminescence spectra of the crystal bulk surface after the surface damage caused by ion implantation. This study provides insights into the benefits of having a doped material in the ZnO crystal after irradiation and highlights the potential of neutron irradiation as a method for enhancing the properties of implanted crystal bulk substrates.

| S-EPMC10193423 | biostudies-literature

γ irradiation induced effects on bismuth active centres and related photoluminescence properties of Bi/Er co-doped optical fibres.

Project description:We investigate the effects of γ irradiation on bismuth active centres (BACs) and related photoluminescence properties of bismuth/erbium co-doped silica fibre (BEDF), [Si] ~28, [Ge] ~1.60, [Al] ~0.10, [Er] ~ <0.10 and [Bi] ~0.10 atom%, fabricated by in-situ solution doping and Modified Chemical Vapor Deposition (MCVD). The samples were irradiated at 1 kGy, 5 kGy, 15 kGy, 30 kGy and 50 kGy doses, and dose rate of 5.5 kGy/h, at room temperature. The optical properties of BEDF samples are tested before and after γ irradiation. We found that high dose γ irradiation could significantly influence the formation and composition of BACs and their photoluminescence performance, as important changes in absorption and emission properties associated with the 830 nm pump produces the direct evidence of γ irradiation effects on BAC-Si. We notice that the saturable to unsaturable absorption ratio at pump wavelength could be increased with high dose γ irradiation, indicating that emission and pump efficiency could be increased by γ irradiation. Our experimental results also reveal good radiation survivability of the BEDF under low and moderate γ irradiation. Our investigation suggests the existence of irradiation related processing available for tailoring the photoluminescence properties and performance of bismuth doped/co-doped fibres.

| S-EPMC4954960 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data