Dataset Information

Using Biotechnology to Solve Engineering Problems: Non-Destructive Testing of Microfabrication Components.

ABSTRACT: In an increasingly miniaturised technological world, non-destructive testing (NDT) methodologies able to detect defects at the micro scale are necessary to prevent failures. Although several existing methods allow the detection of defects at that scale, their application may be hindered by the small size of the samples to examine. In this study, the application of bacterial cells to help the detection of fissures, cracks, and voids on the surface of metals is proposed. The application of magnetic and electric fields after deposition of the cells ensured the distribution of the cells over the entire surfaces and helped the penetration of the cells inside the defects. The use of fluorophores to stain the cells allowed their visualisation and the identification of the defects. Furthermore, the size and zeta potential of the cells and their production of siderophores and biosurfactants could be influenced to detect smaller defects. Micro and nano surface defects made in aluminium, steel, and copper alloys could be readily identified by two Staphylococcus strains and Rhodococcus erythropolis cells.

SUBMITTER: de Carvalho CCCR

PROVIDER: S-EPMC5551831 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:Micro-CT imaging can be used as an effective method for non-destructive testing (NDT) of metal 3D printed parts-including titanium biomedical components fabricated using laser powder-bed-fusion (LPBF). Unfortunately, the cost of commercially available micro-CT scanners renders routine NDT for biomedical applications prohibitively expensive. This study describes the design, manufacturing, and implementation of a cost-effective scanner tailored for NDT of medium-size titanium 3D printed biomedical components. The main elements of the scanner; which include a low-energy (80 kVp) portable x-ray unit, and a low-cost lens-coupled detector; can be acquired with a budget less than $ 11000 USD. The low-cost detector system uses a rare-earth phosphor screen, lens-coupled to a dSLR camera (Nikon D800) in a front-lit tilted configuration. This strategy takes advantage of the improved light-sensitivity of modern full-frame CMOS camera sensors and minimizes source-to-detector distance to maximize x-ray flux. The imaging performance of the system is characterized using a comprehensive CT quality-assurance phantom, and two titanium 3D-printed test specimens. Results show that the cost-effective scanner can survey the porosity and cracks in titanium parts with thicknesses of up to 13 mm of solid metal. Quantitatively, the scanner produced geometrically stable reconstructions, with a voxel size of 118 μm, and noise levels under 55 HU. The cost-effective scanner was able to estimate the porosity of a 17 mm diameter titanium 3D-printed cylindrical lattice structure, with a 0.3% relative error. The proposed scanner will facilitate the implementation of titanium LPBF-printed components for biomedical applications by incorporating routine cost-effective NDT as part of the process control and validation steps of medical-device quality-management systems. By reducing the cost of the x-ray detector and shielding, the scan cost will be commensurate with the overall cost of the validated component.

Project description:For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

Dataset Information

Using Biotechnology to Solve Engineering Problems: Non-Destructive Testing of Microfabrication Components.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets