Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Strengthening Effect of Extruded Mg-8Sn-2Zn-2Al Alloy: Influence of Micro and Nano-Size Mg₂Sn Precipitates.

ABSTRACT: In this study, Mg-8Sn-2Zn-2Al (TZA822) alloys with varying Mg₂Sn contents prior to extrusion were obtained by different pre-treatments (without and with T4), and the strengthening response related to micro and nano-size Mg₂Sn precipitates in the extruded TZA822 alloys was reported. The results showed that the morphology of nano-size Mg₂Sn precipitates exhibits a significant change in basal plane from rod-like to spherical, owing to the decrement in the fraction of micro-size particles before extrusion. Meanwhile, the spherical Mg₂Sn precipitates provided a much stronger strengthening effect than did the rod-like ones, which was ascribed to uniform dispersion and refinement of spherical precipitates to effectively hinder basal dislocation slip. As a consequence, the extruded TZA822 alloy with T4 showed a higher tensile yield strength (TYS) of 245 MPa, ultimate tensile strength (UTS) of 320 MPa and elongation (EL) of 26.5%, as well as a lower degree of yield asymmetry than their counterpart without T4. Detailed reasons for the strengthening effect were given and analyzed.

SUBMITTER: Cheng W

PROVIDER: S-EPMC5551865 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Nano-scale characterisation of sheared β" precipitates in a deformed Al-Mg-Si alloy.

Project description:This paper compares the nano-scale structure of β" precipitates in a peak-aged Al-Mg-Si alloy before and after deformation. Three complementary advanced transmission electron microscopy techniques are used to reveal the structures and elucidate the interaction between dislocations and β" precipitates. We show that the needle-like and semi-coherent β" precipitates are sheared several times on different planes by dislocations during deformation, with no indications that they are bypassed or looped. Our results show that dislocations cut through precipitates and leave behind planar defects lying on planes inclined to 〈100〉 directions inside the precipitates. The results also indicate that precipitates are sheared in single steps, and the implication of this observation is discussed in terms of slip behaviour.

| S-EPMC6877512 | biostudies-literature

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

Project description:Atomic scale characterization of fine precipitates in an under-aged Cu added Al-Mg-Si alloy was carried out by combination of atomically-resolved annular dark-field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. Two types of precipitates were observed in the alloy. In the case of ordered β" precipitates, β" was proposed as Mg5-xAl2+xSi4 (x ≈ 1) with solute Cu atoms replacing Al site of β" precipitate. In the case of disordered precipitates, the precipitates were found to consist of β" sub-unit cells, three-fold symmetric structure without Cu atoms, Cu containing structures termed as "Cu sub-unit cluster", and Q' sub-unit cells. Among these structures, the morphologies of three-fold symmetric structure without Cu atoms, Cu sub-unit cluster, and Q' sub-unit cell were almost the same, so that these structures should be the clusters of Q' phase. Since the areal density, length and diameter of precipitates were almost equal between Cu free Al-Mg-Si alloy and Cu added Al-Mg-Si alloy, the increase of hardness by Cu addition should be due to the precipitation of Cu related precipitates, such as Cu sub-unit clusters and Q' sub-unit cells.

| S-EPMC6226491 | biostudies-literature

Phase Volume Fraction-Dependent Strengthening in a Nano-Laminated Dual-Phase High-Entropy Alloy.

Project description:A recently synthesized FCC/HCP nano-laminated dual-phase (NLDP) CoCrFeMnNi high entropy alloy (HEA) exhibits excellent strength-ductility synergy. However, the underlying strengthening mechanisms of such a novel material is far from being understood. In this work, large-scale atomistic simulations of in-plane tension of the NLDP HEA are carried out in order to explore the HCP phase volume fraction-dependent strengthening. It is found that the dual-phase (DP) structure can significantly enhance the strength of the material, and the strength shows apparent phase volume fraction dependence. The yield stress increases monotonously with the increase of phase volume fraction, resulting from the increased inhibition effect of interphase boundary (IPB) on the nucleation of partial dislocations in the FCC lamella. There exists a critical phase volume fraction, where the flow stress is the largest. The mechanisms for the volume fraction-dependent flow stress include volume fraction-dependent phase strengthening effect, volume fraction-dependent IPB strengthening effect, and volume fraction-dependent IPB softening effect, that is, IPB migration and dislocation nucleation from the dislocation-IPB reaction sites. This work can provide a fundamental understanding for the physical mechanisms of strengthening effects in face-centered cubic HEAs with a nanoscale NLDP structure.

| S-EPMC9435032 | biostudies-literature

Understanding dual precipitation strengthening in ultra-high strength low carbon steel containing nano-sized copper precipitates and carbides.

Project description:Low carbon ferritic steel alloyed with Ti, Mo and Cu was hot rolled and interrupt cooled to produce nano-sized precipitates of copper and (Ti,Mo)C carbides. The steel had a tensile strength of 840 MPa, an increase in yield strength of 380 MPa over that of the plain carbon steel and reasonable ductility. Transmission electron microscopy and small angle neutron scattering were used to characterize size and volume fraction of the precipitates in the steels designed to form only copper precipitates and only (Ti,Mo)C carbides. The individual and combined precipitation strengthening contributions was calculated using the size and volume fraction of precipitates and compared with the measured values.

| S-EPMC5494287 | biostudies-literature

Support for the initial attachment, growth and differentiation of MG-63 cells: a comparison between nano-size hydroxyapatite and micro-size hydroxyapatite in composites.

Project description:Hydroxyapatite (HA) is considered to be a bioactive material that favorably influences the adhesion, growth, and osteogenic differentiation of osteoblasts. To optimize the cell response on the hydroxyapatite composite, it is desirable to assess the optimum concentration and also the optimum particle size. The aim of our study was to prepare composite materials made of polydimethylsiloxane, polyamide, and nano-sized (N) or micro-sized (M) HA, with an HA content of 0%, 2%, 5%, 10%, 15%, 20%, 25% (v/v) (referred to as N0-N25 or M0-M25), and to evaluate them in vitro in cultures with human osteoblast-like MG-63 cells. For clinical applications, fast osseointegration of the implant into the bone is essential. We observed the greatest initial cell adhesion on composites M10 and N5. Nano-sized HA supported cell growth, especially during the first 3 days of culture. On composites with micro-size HA (2%-15%), MG-63 cells reached the highest densities on day 7. Samples M20 and M25, however, were toxic for MG-63 cells, although these composites supported the production of osteocalcin in these cells. On N2, a higher concentration of osteopontin was found in MG-63 cells. For biomedical applications, the concentration range of 5%-15% (v/v) nano-size or micro-size HA seems to be optimum.

| S-EPMC4130718 | biostudies-literature

Effect of FeCoNiCrCu<sub>0.5</sub> High-entropy-alloy Substrate on Sn Grain Size in Sn-3.0Ag-0.5Cu Solder.

Project description:High-entropy alloys (HEAs) are well known for their excellent high-temperature stability, mechanical properties, and promising resistance against oxidation and corrosion. However, their low-temperature applications are rarely studied, particularly in electronic packaging. In this study, the interfacial reaction between a Sn-3.0Ag-0.5Cu solder and FeCoNiCrCu0.5 HEA substrate was investigated. (Cu0.76, Ni0.24)6Sn5 intermetallic compound was formed the substrate at the interface between the solder and the FeCoNiCrCu0.5 HEA substrate. The average Sn grain size on the HEA substrate was 246 ?m, which was considerably larger than that on a pure Cu substrate. The effect of the substrate on Sn grain size is due to the free energy required for the heterogeneous nucleation of Sn on the FeCoNiCrCu0.5 substrate.

| S-EPMC6403290 | biostudies-literature

Strengthening Effects of Zn Addition on an Ultrahigh Ductility Mg-Gd-Zr Magnesium Alloy.

Project description:A newly developed Mg-2Gd-0.5Zr-xZn (x = 0.5, 1.0, 2.0, 3.0 wt %) alloy system exhibits significant strengthening by doping with Zn. In order to understand the strengthening mechanism, the microstructure, texture evolution, and mechanical properties of ultrahigh ductility Mg-2Gd-0.5Zr alloys with a Zn addition were systematically investigated. The addition of Zn results in the formation of Mg-Gd-Zn intermetallic compounds along grain boundaries, which encourages grain refinement during hot extrusion via the particle stimulated nucleation (PSN) mechanism. Furthermore, during texture sharpening the pole changes from <20 2 ¯ 1> to <01 1 ¯ 0>, which also occurred in the extruded alloys with Zn addition, which is unfavorable for the basal slip and tensile twinning. Mg-2Gd-0.5Zr-3Zn shows well-balanced strength and ductility with a tensile yield strength (YS) and ultimate tensile strength (UTS) of 285 and 314 MPa, accompanied by a high tensile elongation of 24%. They are superior to those of commercial AZ31. The enhanced strength is attributed to grain refinement, precipitation strengthening, and texture sharpening induced by alloying with Zn. The research result is also of great value to the development of low rare-earth, high strength, and high room temperature ductility magnesium alloy.

| S-EPMC6213636 | biostudies-other

Influence of nano-BN inclusion and mechanism involved on aluminium-copper alloy.

Project description:Taking advantage of the high specific surface area of the nanoparticles, boron nitride (BN) nanoparticles were incorporated into the semi-solidified aluminium-copper alloy Al-5Cu-Mn (ZL201) system during the casting process, and its properties and enhancement mechanism were studied. The results shown that the BN in the new composite material is more uniformly distributed in the second phase (Al2Cu), which can promote grain refinement and enhance the bonding with the aluminium-based interface, and the formation of stable phases such as AlB2, AlN, CuN, etc. makes the tensile strength and hardness of the material to be significantly improved (8.5%, 10.2%, respectively). The mechanism of the action of BN in Al2Cu was analyzed by establishing an atomic model and after calculation: BN can undergo strong adsorption on the surface of Al2Cu (0 0 1), and the adsorption energy is lower at the bridge sites on the two cut-off surfaces, which makes the binding of BN to the aluminum base more stable. The charge transfer between B, N and each atom of the matrix can promote the formation of strong covalent bonds Al-N, Cu-N and Al-B bonds, which can increase the dislocation density and hinder the grain boundary slip within the alloy.

| S-EPMC10944483 | biostudies-literature

Electrochemical Performance Enhancement of Micro-Sized Porous Si by Integrating with Nano-Sn and Carbonaceous Materials.

Project description:Silicon is investigated as one of the most prospective anode materials for next generation lithium ion batteries due to its superior theoretical capacity (3580 mAh g-1), but its commercial application is hindered by its inferior dynamic property and poor cyclic performance. Herein, we presented a facile method for preparing silicon/tin@graphite-amorphous carbon (Si/Sn@G-C) composite through hydrolyzing of SnCl2 on etched Fe-Si alloys, followed by ball milling mixture and carbon pyrolysis reduction processes. Structural characterization indicates that the nano-Sn decorated porous Si particles are coated by graphite and amorphous carbon. The addition of nano-Sn and carbonaceous materials can effectively improve the dynamic performance and the structure stability of the composite. As a result, it exhibits an initial columbic efficiency of 79% and a stable specific capacity of 825.5 mAh g-1 after 300 cycles at a current density of 1 A g-1. Besides, the Si/Sn@G-C composite exerts enhanced rate performance with 445 mAh g-1 retention at 5 A g-1. This work provides an approach to improve the electrochemical performance of Si anode materials through reasonable compositing with elements from the same family.

| S-EPMC7919461 | biostudies-literature

Data on atomic structures of precipitates in an Al-Mg-Cu alloy studied by high resolution transmission electron microscopy and first-principles calculations.

Project description:The dataset refers to the research article "Precipitation processes and structural evolutions of various GPB zones and two types of S phases in a cold-rolled Al-Mg-Cu alloy" [1]. Transmission electron microscopy (TEM) and density functional theory (DFT) were used to investigate precipitates in an Al-Cu-Mg alloy aged at 443 K for various times. High-angle annular dark-field scanning TEM (HAADF-STEM) images in <100> Al orientations were analyzed. Characteristic contrast and symmetries of columns [2] yielded atoms and positions, used to build precipitate models which could be refined and compared with solid solution reference energies. A calculation cell is an Al supercell compatible with symmetry and morphology of a precipitate, which is fully or partly surrounded by Al, allowing periodicity continuation via neighbor cells. The given crystallographic data include two S-phase variants and Guinier-Preston-Bagaryatsky (GPB) zones, of which the "GPBX" is new.

| S-EPMC7829139 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data