A Novel Electro-Thermal Laminated Ceramic with Carbon-Based Layer.
Ontology highlight
ABSTRACT:
SUBMITTER: Ji Y
PROVIDER: S-EPMC5554022 | biostudies-other | 2017 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Aerogel films with a low density are ideal candidates to meet lightweight application and have already been used in a myriad of fields; however, their structural design for performance enhancement remains elusive. Herein, we put forward a laminated structural engineering strategy to prepare a free-standing carbon nanotube (CNT)-based aerogel film with a densified laminated porous structure. By directional densification and carbonization, the three-dimensional network of one-dimensional nanostructures in the aramid nanofiber/carbon nanotube (ANF/CNT) hybrid aerogel film can be reconstructed to a laminated porous structure with preferential orientation and consecutively conductive pathways, resulting in a large specific surface area (341.9 m2/g) and high electrical conductivity (8540 S/m). Benefiting from the laminated porous structure and high electrical conductivity, the absolute specific shielding effectiveness (SSE/t) of a CNT-based aerogel film can reach 200647.9 dB cm2/g, which shows the highest value among the reported aerogel-based materials. The laminated CNT-based aerogel films with an adjustable wetting property also exhibit exceptional Joule heating performance. This work provides a structural engineering strategy for aerogel films with enhanced electric conductivity for lightweight applications, such as EMI shielding and wearable heating.
| S-EPMC9245345 | biostudies-literature
Project description:Materials with an extremely low thermal and high electrical conductivity that are easy to process, foldable, and nonflammable are required for sustainable applications, notably in energy converters, miniaturized electronics, and high-temperature fuel cells. Given the inherent correlation between high thermal and high electrical conductivity, innovative design concepts that decouple phonon and electron transport are necessary. We achieved this unique combination of thermal conductivity 19.8 ± 7.8 mW/m/K (cross-plane) and 31.8 ± 11.8 mW/m/K (in-plane); electrical conductivity 4.2 S/cm in-plane in electrospun nonwovens comprising carbon as the matrix and silicon-based ceramics as nano-sized inclusions with a sea-island nanostructure. The carbon phase modulates electronic transport for high electrical conductivity, and the ceramic phase induces phonon scattering for low thermal conductivity by excessive boundary scattering. Our strategy can be used to fabricate the unique nonwoven materials for real-world applications and will inspire the design of materials made from carbon and ceramic.
| S-EPMC10065829 | biostudies-literature
Project description:The interaction of dendritic cells and macrophages with a variety of rigid noncellular particles triggers activation of the NLRP3 inflammasome and consequent secretion of interleukin 1β (IL-1β). Noncellular particles can also be generated in the context of helminth infection, since these large pathogens often shed their outermost structures during growth and/or molting. One such structure is the massive, mucin-based, soft, flexible laminated layer (LL), which protects the larval stages of cestodes of the genus Echinococcus We show that particles from the Echinococcus granulosus LL (pLL) trigger NLRP3- and caspase-1-dependent IL-1β in lipopolysaccharide (LPS)-primed mouse bone marrow-derived dendritic cells (BMDC). This response can be elicited by pLL too large for phagocytosis and nonetheless requires actin dynamics, Syk, and phosphatidylinositol 3-kinase (PI3K). These three requirements had already been observed in our previous study on the alteration by pLL of CD86, CD40, IL-10, and IL-12 responses to LPS in BMDC; however, we now show that these alterations are independent of NLRP3 and caspase-1. In other words, an initial interaction with particles requiring actin dynamics, Syk, and PI3K, but not phagocytosis, elicits both NLRP3-dependent and NLRP3-independent responses. Intraperitoneal injection of pLL induced IL-1β, suggesting that contact with LL materials induces IL-1β in the E. granulosus infection setting. Our results extend our understanding of NLRP3 inflammasome activation by noncellular particulate materials both to helminth-derived materials and to flexible/soft materials.
| S-EPMC7440765 | biostudies-literature
Project description:Post-Infective Bowel Dysfunction following Campylobacter enteritis is characterised by reduced microbiota diversity and impaired microbiota recovery
| PRJEB52306 | ENA
Project description:Thermal insulation under extreme conditions requires materials that can withstand complex thermomechanical stress and retain excellent thermal insulation properties at temperatures exceeding 1,000 degrees Celsius1-3. Ceramic aerogels are attractive thermal insulating materials; however, at very high temperatures, they often show considerably increased thermal conductivity and limited thermomechanical stability that can lead to catastrophic failure4-6. Here we report a multiscale design of hypocrystalline zircon nanofibrous aerogels with a zig-zag architecture that leads to exceptional thermomechanical stability and ultralow thermal conductivity at high temperatures. The aerogels show a near-zero Poisson's ratio (3.3 × 10-4) and a near-zero thermal expansion coefficient (1.2 × 10-7 per degree Celsius), which ensures excellent structural flexibility and thermomechanical properties. They show high thermal stability with ultralow strength degradation (less than 1 per cent) after sharp thermal shocks, and a high working temperature (up to 1,300 degrees Celsius). By deliberately entrapping residue carbon species in the constituent hypocrystalline zircon fibres, we substantially reduce the thermal radiation heat transfer and achieve one of the lowest high-temperature thermal conductivities among ceramic aerogels so far-104 milliwatts per metre per kelvin at 1,000 degrees Celsius. The combined thermomechanical and thermal insulating properties offer an attractive material system for robust thermal insulation under extreme conditions.
| S-EPMC9242853 | biostudies-literature
Project description:It is known that excessive concentrations of glutamate in the brain can cause neurotoxicity. A common approach to neutralizing this phenomenon is the use of suppressant drugs. However, excessive dependence on suppressant drugs could potentially lead to adversarial side effects, such as drug addiction. Here, we propose an alternative approach to this problem by controlling excessive amounts of glutamate ions through carbon-based, neural implant-mediated uptake. In this study, we introduce a microfluidic system that enables us to emulate the uptake of glutamate into the carbon matrix. The uptake is controlled using electrical pulses to incorporate glutamate ions into the carbon matrix through electro-adsorption. The effect of electric potential on glutamate ion uptake to control the amount of glutamate released into the microfluidic system was observed. The glutamate concentration was measured using a Ultra Violet-Visible spectrophotometer. The current setup demonstrated that a low pulsatile electric potential (0.5-1.5 V) was able to effectively govern the uptake of glutamate ions. The stimulated carbon matrix was able to decrease glutamate concentration by up to 40%. Furthermore, our study shows that these "entrapped" glutamate molecules can be effectively released upon electrical stimulation, thereby reversing the carbon electrical charge through a process called reverse uptake. A release model was used to study the profile of glutamate release from the carbon matrix at a potential of 0-1.5 V. This study showed that a burst release of glutamate was evident at an applied voltage higher than 0.5 V. Ultimately, the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) test for cytotoxicity indicated a cell viability of more than 80% for the carbon matrix. This test demonstrates that the carbon matrix can support the proliferation of cells and has a nontoxic composition; thus, it could be accepted as a candidate material for use as neural implants.
| S-EPMC9133582 | biostudies-literature
Project description:Moiré superlattices formed by twisted stacking in van der Waals materials have emerged as a new platform for exploring the physics of strongly correlated materials and other emergent phenomena1-5. However, there remains a lack of research on the mechanical properties of twisted-layer van der Waals materials, owing to a lack of suitable strategies for making three-dimensional bulk materials. Here we report the successful synthesis of a polycrystalline boron nitride bulk ceramic with high room-temperature deformability and strength. This ceramic, synthesized from an onion-like boron nitride nanoprecursor with conventional spark plasma sintering and hot-pressing sintering, consists of interlocked laminated nanoplates in which parallel laminae are stacked with varying twist angles. The compressive strain of this bulk ceramic can reach 14% before fracture, about one order of magnitude higher compared with traditional ceramics (less than 1% in general), whereas the compressive strength is about six times that of ordinary hexagonal boron nitride layered ceramics. The exceptional mechanical properties are due to a combination of the elevated intrinsic deformability of the twisted layering in the nanoplates and the three-dimensional interlocked architecture that restricts deformation from propagating across individual nanoplates. The advent of this twisted-layer boron nitride bulk ceramic opens a gate to the fabrication of highly deformable bulk ceramics.
| S-EPMC10881384 | biostudies-literature
Project description:Residual stress arisen in fabrication process of Double-Ceramic-Layer Thermal Barrier Coating System (DCL-TBCs) has a significant effect on its quality and reliability. In this work, based on the practical fabrication process of DCL-TBCs and the force and moment equilibrium, a theoretical model was proposed at first to predict residual stress generation in its fabrication process, in which the temperature dependent material properties of DCL-TBCs were incorporated. Then, a Finite Element method (FEM) has been carried out to verify our theoretical model. Afterwards, some important geometric parameters for DCL-TBCs, such as the thickness ratio of stabilized Zirconia (YSZ, ZrO2-8%Y2O3) layer to Lanthanum Zirconate (LZ, La2Zr2O7) layer, which is adjustable in a wide range in the fabrication process, have a remarkable effect on its performance, therefore, the effect of this thickness ratio on residual stress generation in the fabrication process of DCL-TBCs has been systematically studied. In addition, some thermal spray treatment, such as the pre-heating treatment, its effect on residual stress generation has also been studied in this work. It is found that, the final residual stress mainly comes from the cooling down process in the fabrication of DCL-TBCs. Increasing the pre-heating temperature can obviously decrease the magnitude of residual stresses in LZ layer, YSZ layer and substrate. With the increase of the thickness ratio of YSZ layer to LZ layer, magnitudes of residual stresses arisen in LZ layer and YSZ layer will increase while residual stress in substrate will decrease.
| S-EPMC5245788 | biostudies-other
Project description:The most important property of energy-conversion ceramics in high-power lighting devices based on laser diodes (LDs) is thermal durability because high-energy LDs act as excitation and heat sources for ceramics. Herein, aluminum-ceramic composites (ACCs) are introduced for the manipulation of heat generated during high-power lighting. The cerium-doped aluminum garnet (YAG:Ce) phosphor is selected as the energy-conversion ceramic material. The ACCs have an all-in-one structure bridged by a low-melting glass material. In ACCs, the heat flow from the ceramic to Al is manipulated by a heat-flux throttling layer (TL) comprised of Al and glass. During high-power lighting operation, the input-output temperature differences (Tin?-?Tout) between the ceramic layer (input heat) and end face of the Al layer (output heat) are 13 and 3.9?°C in the absence and presence of the TL, respectively. A lower Tin?-?Tout means less heat is loss during heat flow from the ceramic to the metal due to the temperature gradient created by inserting the TL. The results provide a potential application for multi-energy-conversion systems, i.e., optical to heat and heat to electric energy, in terms of heat flow manipulation.
| S-EPMC6294771 | biostudies-literature
Project description:As the most extensively used gas-sensing devices, inorganic semiconductor chemiresistors are facing great challenges in realizing mechanical flexibility and room-temperature gas detection for developing next-generation wearable sensing devices. Herein, for the first time, flexible all-inorganic yttria-stabilized zirconia (YSZ)/In2 O3 /graphitic carbon nitride (g-C3 N4 ) (ZIC) gas sensor is designed by employing YSZ nanofibers as substrate, and ultrathin In2 O3 /g-C3 N4 heterostructures as active sensing layer. The YSZ substrate possesses small nanofiber diameter (310 nm), ultrafine grain size (23.9 nm), and abundant dangling bonds, endowing it with striking mechanical flexibility and strong adhesion with In2 O3 /g-C3 N4 sensing layer. Meanwhile, the ultrathin thickness (≈7 nm) of In2 O3 /g-C3 N4 ensures that the inorganic sensing layer has tiny linear strain along with the deformation of flexible YSZ substrate, thereby enabling unusual bending capacity. To address the operating temperature issue, the gas sensor is operated by using a visible-light-powered strategy. Under visible-light illumination, the flexible ZIC sensor exhibits a perfectly reversible response/recovery dynamic process and ultralow detection limit of 50 ppb to toxic nitrogen dioxide at room temperature. This work not only provides an insight into the mechanical flexibility of inorganic materials, but also offers a valuable reference for developing other flexible inorganic-semiconductor-based room-temperature gas sensors.
| S-EPMC8655210 | biostudies-literature