Microstructure and Dielectric Properties of LPCVD/CVI-SiBCN Ceramics Annealed at Different Temperatures.
Ontology highlight
ABSTRACT:
SUBMITTER: Li J
PROVIDER: S-EPMC5554036 | biostudies-other | 2017 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In the present work, BaZr0.05Ti0.95O3 ceramics with grain sizes between 0.45 and 135 µm were prepared by solid-state reaction and classical sintering. The effect of grain size on dielectric properties was systematically explored, and it was found that dielectric permittivity reaches a maximum value for grain sizes between 1.5 and 10 µm and then rapidly drops for larger grain sizes. A numerical finite element method was employed to eliminate the effect of porosity on the effective values of permittivity. The results indicate that it is possible to have a critical size in slightly doped barium titanate ceramics with enhanced functional properties for a grain size between 1.5 and 10 µm.
| S-EPMC7579612 | biostudies-literature
Project description:In this work, the (Y0.5Nb0.5)xTi1-xO2 (x?=?0.001, 0.01, 0.02, 0.04, 0.06 and 0.1) ceramics (as called YNTO) were fabricated by synthesized through a standard solid-state reaction. As revealed by the X-ray diffraction (XRD) spectra, the YNTOs exhibit tetragonal rutile structure. Meanwhile, the grain size of YNTO ceramics increased and then decreased with the increase of x value, and the largest value reached when x?=?0.02. All the YNTO samples display colossal permittivity (~102-105) over a wide temperature and frequency range. Moreover, the optimal ceramic, (Y0.5Nb0.5)0.02Ti0.98O2, exhibits high performance over a broad temperature range from 20?°C to 180?°C; specifically, at 1?kHz, the dielectric constant and dielectric loss are 6.55?×?104 and 0.22 at room temperature, and they are 1.03?×?105 and 0.11 at 180?°C, respectively.
| S-EPMC5561205 | biostudies-literature
Project description:The microstructure dependent electromagnetic interference (EMI) shielding properties of nano-layered Ti3AlC2 ceramics were presented in this study by comparing the shielding properties of various Ti3AlC2 ceramics with distinct microstructures. Results indicate that Ti3AlC2 ceramics with dense microstructure and coarse grains are more favourable for superior EMI shielding efficiency. High EMI shielding effectiveness over 40?dB at the whole Ku-band frequency range was achieved in Ti3AlC2 ceramics by microstructure optimization, and the high shielding effectiveness were well maintained up to 600?°C. A further investigation reveals that only the absorption loss displays variations upon modifying microstructure by allowing more extensive multiple reflections in coarse layered grains. Moreover, the absorption loss of Ti3AlC2 was found to be much higher than those of highly conductive TiC ceramics without layered structure. These results demonstrate that nano-layered MAX phase ceramics are promising candidates of high-temperature structural EMI shielding materials and provide insightful suggestions for achieving high EMI shielding efficiency in other ceramic-based shielding materials.
| S-EPMC5962584 | biostudies-literature
Project description:A sol-gel method is employed for preparing high quality lead-free glass-ceramic samples (1 - x)BCZT-xBBS-incorporating Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) powder and Bi2O3-B2O3-SiO2 (BBS) glass-doped additives with different values of x (x = 0, 0.05, 0.1, 0.15). Systematic investigations are performed to comprehend the structural, dielectric and energy storage characteristics using X-ray diffraction, field-emission scanning electron microscopy, impedance and ferroelectric analyser methods. With appropriate BBS doping (x), many fundamental traits including breakdown strength, dielectric loss and energy storage density have shown significant improvements. Low doping-level samples x < 0.1 have retained the pure perovskite phase while a second glass phase appeared in samples with x ? 0.1. As the doping level (0.1 ? x > 0) is increased, the average grain size decreased to become better homogeneous materials with improved breakdown energy strengths. Excessive addition of BBS (x = 0.15) causes negative effects on microstructures and other traits. The glass-ceramic sample 0.95BCZT-0.05BBS exhibits excellent dielectric permittivity and temperature stability, with the highest energy storage density of 0.3907 J cm-3 at 130 kV cm-1. These results provide good reference to develop lead-free ceramics of high energy storage density.
| S-EPMC7540749 | biostudies-literature
Project description:ObjectiveTo investigate the thermal and frequency dependence of dielectric properties of ex vivo liver tissue - relative permittivity and effective conductivity - over the frequency range 500 MHz to 6 GHz and temperatures ranging from 20 to 130 °C.MethodsWe measured the dielectric properties of fresh ex vivo bovine liver tissue using the open-ended coaxial probe method (n = 15 samples). Numerical optimization techniques were utilized to obtain parametric models for characterizing changes in broadband dielectric properties as a function of temperature and thermal isoeffective dose. The effect of heating tissue at rates over the range 6.4-16.9 °C/min was studied. The measured dielectric properties were used in simulations of microwave ablation to assess changes in simulated antenna return loss compared to experimental measurements.ResultsAcross all frequencies, both relative permittivity and effective conductivity dropped sharply over the temperature range 89 - 107 °C. Below 91 °C, the slope of the effective conductivity changes from positive values at lower frequencies (0.5-1.64 GHz) to negative values at higher frequencies (1.64-6 GHz). The maximum achieved correlation values between transient reflection coefficients from measurements and simulations ranged between 0.83 - 0.89 and 0.68 - 0.91, respectively, when using temperature-dependent and thermal-dose dependent dielectric property parameterizations.ConclusionWe have presented experimental measurements and parametric models for characterizing changes in dielectric properties of bovine liver tissue at ablative temperatures.SignificanceThe presented dielectric property models will contribute to the development of ablation systems operating at frequencies other than 2.45 GHz, as well as broadband techniques for monitoring growth of microwave ablation zones.
| S-EPMC7680390 | biostudies-literature
Project description:Boosting dielectric permittivity representing electrical polarizability of dielectric materials has been considered a keystone for achieving scientific breakthroughs as well as technological advances in various multifunctional devices. Here, we demonstrate sizable enhancements of low-frequency dielectric responses in oxygen-deficient oxide ceramics through specific treatments under humid environments. Ultrahigh dielectric permittivity (~5.2 × 106 at 1 Hz) is achieved by hydrogenation, when Ni-substituted BaTiO3 ceramics are exposed to high humidity. Intriguingly, thermal annealing can restore the dielectric on-state (exhibiting huge polarizability in the treated ceramics) to the initial dielectric off-state (displaying low polarizability of ~103 in the pristine ceramics after sintering). The conversion between these two dielectric states via the ambient environment-mediated treatments and the successive application of external stimuli allows us to realize reversible control of dielectric relaxation characteristics in oxide ceramics. Conceptually, our findings are of practical interest for applications to highly efficient dielectric-based humidity sensors.
| S-EPMC9956132 | biostudies-literature
Project description:Transparent polycrystalline ceramics with cubic crystal structure have played important roles in a wide variety of solid-state laser applications, whereas for non-cubic structures, single crystal only has been used. For further progress in optical technologies, effective materials beyond the current limitations are necessary. Here we report a new type of non-cubic ceramic laser material that overturns conventional common sense. It is hexagonal Nd-doped fluorapatite (Nd:FAP) ceramics with an optical quality comparable to single crystal while having random crystal orientation. It is composed of ultrafine grains with a loss coefficient of 0.18 cm-1 at a lasing wavelength of 1063 nm, and its laser oscillation was demonstrated. This is the first verification of lasing in randomly oriented non-cubic ceramics. Laser oscillation in the non-cubic ceramics was realized through both advanced liquid-phase nano-powder synthesis technology and highly controlled pulsed-current sintering techniques. Our findings should open new avenues for future solid-state laser and optical applications.
| S-EPMC6635367 | biostudies-literature
Project description:Animal horns play an important role during intraspecific combat. This work investigates the microstructure and mechanical properties of horns from four representative ruminant species: the bighorn sheep (Ovis canadensis), domestic sheep (Ovis aries), mountain goat (Oreamnos americanus) and pronghorn (Antilocapra americana), aiming to understand the relation between evolved microstructures and mechanical properties. Microstructural similarity is found where disc-shaped keratin cells attach edge-to-edge along the growth direction of the horn core (longitudinal direction) forming a lamella; multiple lamellae are layered face to face along the impact direction (radial direction, perpendicular to horn core growth direction), forming a wavy pattern surrounding a common feature, the tubules. Differences among species include the number and shape of the tubules, the orientation of aligned lamellae and the shape of keratin cells. Water absorption tests reveal that the pronghorn horn has the largest water-absorbing ability due to the presence of nanopores in the keratin cells. The loading direction (compressive and tensile) and level of hydration vary among the horns from different species. The differences in mechanical properties among species may relate to their different fighting behaviours: high stiffness and strength in mountain goat to support the forces during stabbing; high tensile strength in pronghorn for interlocked pulling; impact energy absorption properties in domestic and bighorn sheep to protect the skull during butting. These design rules based on evolutionary modifications among species can be applied in synthetic materials to meet different mechanical requirements.
| S-EPMC6030630 | biostudies-literature
Project description:The effects of 10% metakaolin addition on compressive strength, water absorption, shrinkage and microstructure evolution of cement paste after elevated temperatures exposure from room temperature to 800 °C were evaluated. The experimental results show that compressive strength increases at 200 °C and 400 °C compared with that obtained at ambient temperature. Up to 800 °C, compressive strength decreases rapidly. The addition of 10% metakaolin leads to the enhancement of compressive strength regardless of exposure temperatures. After thermal exposure at 400 °C, compressive strength reaches the maximum value. Thermal exposure degrades pore structure. A polynomial equation was used to indicate the shrinkage of cement paste or metakaolin-blended cement paste with testing days. Mechanical properties, permeability resistance, and shrinkage in cement pastes are closely related to the microstructure development. 10% metakaolin addition presents better thermal resistance, lower shrinkage and denser microstructure compared with pure cement paste before and after thermal exposure.
| S-EPMC6471423 | biostudies-literature
Project description:Measurements of the surface tension of aqueous solutions of polysorbates (Tween 20, Tween 60 and Tween 80) at 293, 303 and 313 K were made. On the basis of the obtained results the Gibbs surface excess concentration of the Tweens at the water-air interface and critical micelle concentrations were determined. Knowing the Gibbs surface excess concentration and taking into account the difference between the limiting area occupied by water and Tween molecules at the water-air interface, the fraction occupied by Tween molecules was established. The limiting area occupied by the Tween molecule was calculated by applying the Joos equation. The area determined in such a way was confirmed by the calculations of cross section of Tween molecules based on the bond lengths and the angles between them as well as the average distance between the molecules, taking into account their different conformations. This area was used for calculation of the standard Gibbs energy of adsorption using the Langmuir equation. The standard Gibbs energy of Tweens adsorption at the water-air interface was also calculated from the hydrophobic part of Tween molecule-water interface tension and that of hydrophobic part. Using the determined values of standard Gibbs energy of adsorption at different temperatures, the standard enthalpy and entropy values were deduced. The standard thermodynamic functions of micellization were also determined and compared to the Gibbs energy of Tween molecules interactions through the water phase.
| S-EPMC6244871 | biostudies-literature