Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Al-doped ZnO/Ag-nanowire Composite Electrodes for Flexible 3-Dimensional Nanowire Solar Cells.

ABSTRACT: Silver nanowires in conjunction with sputter-coated Al-doped ZnO (AZO) thin films were used as a composite transparent top electrode for hybrid radial-junction ZnO nanowire/a-Si:H p-i-n thin-film solar cells. Solar cells with the composite nanowire top contacts attained a short-circuit current density (Jsc) of 13.9 mA/cm2 and a fill factor (FF) of 62% on glass substrates while a Jsc of 13.0 mA/cm2 and FF of 62% was achieved on plastic substrates. The power conversion efficiency (PCE) of the 3-dimensional solar cells improved by up to 60% compared to using AZO electrodes alone due to enhanced coverage of the top electrode over the 3-D structures, decreasing the series resistance of the device by 5×. The composite layer also showed a 10× reduction in sheet resistance compared to the AZO thin-film contact under applied mechanical strain.

SUBMITTER: Pathirane MK

PROVIDER: S-EPMC5566356 | biostudies-other | 2017 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Highly transparent and flexible Ag nanowire-embedded silk fibroin electrodes for biocompatible flexible and transparent heater.

Project description:We investigated the electrical, optical and mechanical properties of silver (Ag) nanowire (NW) embedded into a silk fibroin (SF) substrate to create high performance, flexible, transparent, biocompatible, and biodegradable heaters for use in wearable electronics. The Ag NW-embedded SF showed a low sheet resistance of 15 Ω sq-1, high optical transmittance of 85.1%, and a small inner/outer critical bending radius of 1 mm. In addition, the Ag NW-embedded SF showed a constant resistance change during repeated bending, folding, and rolling because the connectivity of the Ag NW embedded into the SF substrate was well maintained. Furthermore, the biocompatible and biodegradable Ag NW-embedded SF substrate served as a flexible interconnector for wearable electronics. The high performance of the transparent and flexible heater demonstrated that an Ag NW-embedded SF-based heater can act as a biocompatible and biodegradable substrate for wearable heaters for the human body.

| S-EPMC9056558 | biostudies-literature

High-Stability Silver Nanowire-Al2O3 Composite Flexible Transparent Electrodes Prepared by Electrodeposition.

Project description:Silver nanowire (AgNW) conductive film fabricated by solution processing was investigated as an alternative to indium tin oxide (ITO) in flexible transparent electrodes. In this paper, we studied a facile and effective method by electrodepositing Al2O3 on the surface of AgNWs. As a result, flexible transparent electrodes with improved stability could be obtained by electrodepositing Al2O3. It was found that, as the annealing temperature rises, the Al2O3 coating layer can be transformed from Al2O3·H2O into a denser amorphous state at 150 °C. By studying the increase of electrodeposition temperature, it was observed that the transmittance of the AgNW-Al2O3 composite films first rose to the maximum at 70 °C and then decreased. With the increase of the electrodeposition time, the figure of merit (FoM) of the composite films increased and reached the maximum when the time was 40 s. Through optimizing the experimental parameters, a high-stability AgNW flexible transparent electrode using polyimide (PI) as a substrate was prepared without sacrificing optical and electrical performance by electrodepositing at -1.1 V and 70 °C for 40 s with 0.1 mol/L Al(NO3)3 as the electrolyte, which can withstand a high temperature of 250 °C or 250,000 bending cycles with a bending radius of 4 mm.

| S-EPMC8621956 | biostudies-literature

High performance organic light-emitting diodes employing ITO-free and flexible TiO <sub><i>x</i></sub> /Ag/Al:ZnO electrodes.

Project description:The broad application of flexible optoelectronic devices is still hampered by the lack of an ITO-free and highly flexible transparent electrode. Dielectric/metal/dielectric (DMD) transparent electrodes are promising candidates to replace ITO, especially in flexible devices due to their mechanical stability to bending, high optical transmittance and low sheet resistance (<6 Ω sq-1). This paper reports on organic light emitting diodes (OLEDs) employing a DMD electrode, specifically TiO x /Ag/Al:ZnO (doped with 2 wt% Al2O3) fabricated by sputter deposition, together with a solution-processed organic polymeric emitting layer. The electrodes were sputtered without substrate heating on rigid glass and flexible polyethylene terephthalate (PET). The results showed that the OLED devices on the DMD electrodes outperform the OLEDs on commercial ITO substrates in terms of maximum luminance as well as current efficacy. Specifically, DMD-based devices achieve up to 30% higher current efficacy on glass and up to 260% higher efficacy on PET, as compared to the ITO-based reference devices. Maximum luminance reaches up to 100 000 cd m-2 for the DMD-based OLEDs on glass and 43 000 cd m-2 for those on PET. This performance is due to the low sheet resistance of the electrodes combined with efficient light outcoupling and shows the potential of DMDs to replace ITO in optoelectronic devices. This outstanding type of optoelectronic device paves the way for the future high throughput production of flexible display and photovoltaic devices.

| S-EPMC9033011 | biostudies-literature

High-performance dye-sensitized solar cells using Ag-doped CoS counter electrodes.

Project description:CoS has been emerging as a promising Pt-free counter electrode (CE) material for dye-sensitized solar cells (DSSCs) due to its satisfactory electrocatalytic properties for redox reactions. However, its low electronic and ionic conductivities have limited its use in DSSCs. The doping of Ag with appropriate amount significantly improved the properties of CoS for application as a CE. Ag-doped CoS samples with various doping amounts were prepared by a facile one-step hydrothermal approach. There were very sharp changes of morphologies and particle sizes after doping different amounts of Ag. It is found that the DSSC fabricated with the 5% Ag-doped CoS CE achieved an impressive power-conversion efficiency (PCE) of 8.35% which was higher than that of the DSSC with a Pt CE (8.17%) by 2.2%, while the DSSC consisting of undoped CoS only exhibited a PCE of 6.93%. Such an enhanced PCE could be attributed to the significantly improved electrochemical activity and mixed conductivity resulting from the Ag dopant. Therefore, the excellent electrocatalytic activity, facile preparation and low material cost of the Ag-doped CoS electrode provide it with promising potential for large-scale production of new-generation DSSCs.

| S-EPMC9080620 | biostudies-literature

Hybrid Ag nanowire transparent conductive electrodes with randomly oriented and grid-patterned Ag nanowire networks.

Project description:To improve the electrical properties of silver nanowire (Ag NW) transparent conductive electrodes (TCEs), the density of Ag NW networks should be increased, to increase the number of percolation paths. However, because of the inverse relationship between optical transmittance and electrical resistivity, the optical properties of Ag NW TCEs deteriorate with increasing density of the Ag NW network. In this study, a hybrid Ag NW electrode composed of randomly oriented and grid-patterned Ag NW networks is demonstrated. The hybrid Ag NW electrodes exhibit significantly improved sheet resistances and slightly decreased transmittances compared to randomly oriented Ag NW networks. Hybrid Ag NW TCEs show excellent mechanical flexibilities and durabilities in bending tests with a 5?mm radius of curvature. Moreover, flexible transparent film heaters (TFHs) based on the hybrid Ag NW electrodes show elevated maximum temperatures relative to TFHs based on randomly oriented Ag NW electrodes, when operated at the same input voltages.

| S-EPMC5599587 | biostudies-literature

Spray Deposition of Ag Nanowire?Graphene Oxide Hybrid Electrodes for Flexible Polymer?Dispersed Liquid Crystal Displays.

Project description:We investigated the effect of different spray-coating parameters on the electro-optical properties of Ag nanowires (NWs). Highly transparent and conductive Ag NW?graphene oxide (GO) hybrid electrodes were fabricated by using the spray-coating technique. The Ag NW percolation network was modified with GO and this led to a reduced sheet resistance of the Ag NW?GO electrode as the result of a decrease in the inter-nanowire contact resistance. Although electrical conductivity and optical transmittance of the Ag NW electrodes have a trade-off relationship, Ag NW?GO hybrid electrodes exhibited significantly improved sheet resistance and slightly decreased transmittance compared to Ag NW electrodes. Ag NW?GO hybrid electrodes were integrated into smart windows based on polymer-dispersed liquid crystals (PDLCs) for the first time. Experimental results showed that the electro-optical properties of the PDLCs based on Ag NW?GO electrodes were superior when compared to those of PDLCs based on only Ag NW electrodes. This study revealed that the hybrid Ag NW?GO electrode is a promising material for manufacturing the large-area flexible indium tin oxide (ITO)-free PDLCs.

| S-EPMC6266263 | biostudies-literature

Facile Post Treatment of Ag Nanowire/Polymer Composites for Flexible Transparent Electrodes and Thin Film Heaters.

Project description:Typical polyol-based synthesis of silver nanowire employs insulating polymer as a surfactant for the silver nanowire growth, which limits direct contact between each nanowire and thus its optoelectronic properties. We herein demonstrate that a simple solvent treatment effectively removes the insulating polymer around Ag NWs, leading to significantly decreased sheet resistance (~12 Ω/sq) with an increased transmittance (81% @ T550), as compared to other post-treatments. We successfully demonstrate the transparent film heaters using the solvent-treated Ag NWs network, which rapidly exhibited 150 °C under a bias of 5 V. Flexible film heaters on plastic substrate is also demonstrated, suggesting a great potential of the solvent treatment process of Ag NWs for flexible transparent electrode and film heater applications.

| S-EPMC7919462 | biostudies-literature

Piezo-Phototronic Effect Enhanced Flexible Solar Cells Based on n-ZnO/p-SnS Core-Shell Nanowire Array.

Project description:The piezo-phototronic effect is about the enhanced separation, transport, and recombination of the photogenerated carriers using the piezoelectric polarization charges present in piezoelectric-semiconductor materials. Here, it is presented that the piezo-phototronic effect can be effectively applied to improve the relative conversion efficiency of a flexible solar cell based on n-ZnO/p-SnS core-shell nanowire array for 37.3% under a moderate vertical pressure. The performance of the solar cell can be effectively enhanced by a gentle bending of the device, showing its potential for application in curly geometries. This study not only adds further understanding about the concept of increasing solar energy conversion efficiency via piezo-phototronic effect, but also demonstrates the great potential of piezo-phototronic effect in the application of large-scale, flexible, and lightweight nanowire array solar cells.

| S-EPMC5238743 | biostudies-literature

Comparative Study on ZnO Monolayer Doped with Al, Ga and In Atoms as Transparent Electrodes.

Project description:Transparent anodes are indispensable components for optoelectronic devices. Two-dimensional (2D) materials are attracting increasing research interest due to their unique properties and promising applications. In order to design novel transparent anodes, we investigated the electronic, optical, and electrical properties of 2D ZnO monolayers doped with Al, Ga, and In using the first-principles calculation in combination with the Boltzmann transport theory. When the doping concentration of Al, Ga, and In is less than 12.5 wt %, we find that the average transmittance reaches up to 99% in the visible and UV regions. Moreover, the electrical conductivity is enhanced for the Al, Ga, and In doped systems compared to that of the pristine ZnO monolayer. In particular, a good electrical conductivity with a significant improvement for the In doped ZnO monolayer is achieved compared to Al and Ga doping at the 6.25 wt % level. These results suggest that the ZnO monolayer based materials, and in particular the In doped ZnO monolayer, are promising transparent anodes for nanoscale electronic and optoelectronic applications.

| S-EPMC5551746 | biostudies-other

Carbon nanotube/metal-sulfide composite flexible electrodes for high-performance quantum dot-sensitized solar cells and supercapacitors.

Project description:Carbon nanotubes (CNT) and metal sulfides have attracted considerable attention owing to their outstanding properties and multiple application areas, such as electrochemical energy conversion and energy storage. Here we describes a cost-effective and facile solution approach to the preparation of metal sulfides (PbS, CuS, CoS, and NiS) grown directly on CNTs, such as CNT/PbS, CNT/CuS, CNT/CoS, and CNT/NiS flexible electrodes for quantum dot-sensitized solar cells (QDSSCs) and supercapacitors (SCs). X-ray photoelectron spectroscopy, X-ray diffraction, and transmission electron microscopy confirmed that the CNT network was covered with high-purity metal sulfide compounds. QDSSCs equipped with the CNT/NiS counter electrode (CE) showed an impressive energy conversion efficiency (η) of 6.41% and remarkable stability. Interestingly, the assembled symmetric CNT/NiS-based polysulfide SC device exhibited a maximal energy density of 35.39 W h kg-1 and superior cycling durability with 98.39% retention after 1,000 cycles compared to the other CNT/metal-sulfides. The elevated performance of the composites was attributed mainly to the good conductivity, high surface area with mesoporous structures and stability of the CNTs and the high electrocatalytic activity of the metal sulfides. Overall, the designed composite CNT/metal-sulfide electrodes offer an important guideline for the development of next level energy conversion and energy storage devices.

| S-EPMC5395955 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data