Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Objective-lens-free Fiber-based Position Detection with Nanometer Resolution in a Fiber Optical Trapping System.

ABSTRACT: Position detection with high accuracy is crucial for force calibration of optical trapping systems. Most existing position detection methods require high-numerical-aperture objective lenses, which are bulky, expensive, and difficult to miniaturize. Here, we report an affordable objective-lens-free, fiber-based position detection scheme with 2 nm spatial resolution and 150 MHz bandwidth. This fiber based detection mechanism enables simultaneous trapping and force measurements in a compact fiber optical tweezers system. In addition, we achieved more reliable signal acquisition with less distortion compared with objective based position detection methods, thanks to the light guiding in optical fibers and small distance between the fiber tips and trapped particle. As a demonstration of the fiber based detection, we used the fiber optical tweezers to apply a force on a cell membrane and simultaneously measure the cellular response.

SUBMITTER: Ti C

PROVIDER: S-EPMC5640681 | biostudies-other | 2017 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Objective-lens-free Fiber-based Position Detection with Nanometer Resolution in a Fiber Optical Trapping System.

Ti Chaoyang C Ho-Thanh Minh-Tri MT Wen Qi Q Liu Yuxiang Y

Scientific reports 20171013 1

Position detection with high accuracy is crucial for force calibration of optical trapping systems. Most existing position detection methods require high-numerical-aperture objective lenses, which are bulky, expensive, and difficult to miniaturize. Here, we report an affordable objective-lens-free, fiber-based position detection scheme with 2 nm spatial resolution and 150 MHz bandwidth. This fiber based detection mechanism enables simultaneous trapping and force measurements in a compact fiber o ...[more]

PMID: 29030571

Similar Datasets

A planar ultraviolet objective lens for optical axis free imaging nanolithography by employing optical negative refraction.

Project description:Lithography is one of the most key technologies for integrated circuit (IC) manufacturing and micro/nano-functional device fabrication, while the imaging objective lens plays one important role. Due to the curved surface of the conventional objective lens, the imaging field of view is limited and the objective lens system is complex. In this paper, a planar objective lens based on the optical negative refraction principle is demonstrated for achieving optical axis free and long depth of focus imaging nanolithography. Through employing a hyperbolic metamaterial composed of silver/titanium dioxide multilayers, plasmonic waveguide modes could be generated in multilayers, which results in optical negative refraction and then flat imaging at ultraviolet wavelength. The corresponding imaging characteristics are investigated in simulation and experiment. At the I-line wavelength of 365 nm, the highest imaging resolution of 165 nm could be realized in the 100 nm photoresist layer under the working gap of 100 nm between the objective lens and substrate. Moreover, this planar objective lens has good ability for cross-scale and two-dimensional imaging lithography, and is similar to a conventional projection objective lens. It is believed that this kind of planar objective lens will provide a promising avenue for low-cost nanofabrication scenarios in the near future.

| S-EPMC9417967 | biostudies-literature

Femtosecond laser 3D printed micro objective lens for ultrathin fiber endoscope.

Project description:The most important optical component in an optical fiber endoscope is its objective lens. To achieve a high imaging performance level, the development of an ultra-compact objective lens is thus the key to an ultra-thin optical fiber endoscope. In this work, we use femtosecond laser 3D printing to develop a series of micro objective lenses with different optical designs. The imaging resolution and field-of-view performances of these printed micro objective lenses are investigated via both simulations and experiments. For the first time, multiple micro objective lenses with different fields of view are printed on the end face of a single imaging optical fiber, thus realizing the perfect integration of an optical fiber and objective lenses. This work demonstrates the considerable potential of femtosecond laser 3D printing in the fabrication of micro-optical systems and provides a reliable solution for the development of an ultrathin fiber endoscope.

| S-EPMC11197503 | biostudies-literature

Plasmonic layer-selective all-optical switching of magnetization with nanometer resolution.

Project description:All-optical magnetization reversal with femtosecond laser pulses facilitates the fastest and least dissipative magnetic recording, but writing magnetic bits with spatial resolution better than the wavelength of light has so far been seen as a major challenge. Here, we demonstrate that a single femtosecond laser pulse of wavelength 800?nm can be used to toggle the magnetization exclusively within one of two 10-nm thick magnetic nanolayers, separated by just 80?nm, without affecting the other one. The choice of the addressed layer is enabled by the excitation of a plasmon-polariton at a targeted interface of the nanostructure, and realized merely by rotating the polarization-axis of the linearly-polarized ultrashort optical pulse by 90°. Our results unveil a robust tool that can be deployed to reliably switch magnetization in targeted nanolayers of heterostructures, and paves the way to increasing the storage density of opto-magnetic recording by a factor of at least 2.

| S-EPMC6803660 | biostudies-literature

Optical trapping assisted label-free and amplification-free detection of SARS-CoV-2 RNAs with an optofluidic nanopore sensor.

Project description:Ultrasensitive, versatile sensors for molecular biomarkers are a critical component of disease diagnostics and personalized medicine as the COVID-19 pandemic has revealed in dramatic fashion. Integrated electrical nanopore sensors can fill this need via label-free, direct detection of individual biomolecules, but a fully functional device for clinical sample analysis has yet to be developed. Here, we report amplification-free detection of SARS-CoV-2 RNAs with single molecule sensitivity from clinical nasopharyngeal swab samples on an electro-optofluidic chip. The device relies on optically assisted delivery of target carrying microbeads to the nanopore for single RNA detection after release. A sensing rate enhancement of over 2,000x with favorable scaling towards lower concentrations is demonstrated. The combination of target specificity, chip-scale integration and rapid detection ensures the practicality of this approach for COVID-19 diagnosis over the entire clinically relevant concentration range from 104-109 copies/mL.

| S-EPMC8400458 | biostudies-literature

Optical interferometry based micropipette aspiration provides real-time sub-nanometer spatial resolution.

Project description:Micropipette aspiration (MPA) is an essential tool in mechanobiology; however, its potential is far from fully exploited. The traditional MPA technique has limited temporal and spatial resolution and requires extensive post processing to obtain the mechanical fingerprints of samples. Here, we develop a MPA system that measures pressure and displacement in real time with sub-nanometer resolution thanks to an interferometric readout. This highly sensitive MPA system enables studying the nanoscale behavior of soft biomaterials under tension and their frequency-dependent viscoelastic response.

| S-EPMC8140111 | biostudies-literature

Intracavity optical trapping of microscopic particles in a ring-cavity fiber laser.

Project description:Standard optical tweezers rely on optical forces arising when a focused laser beam interacts with a microscopic particle: scattering forces, pushing the particle along the beam direction, and gradient forces, attracting it towards the high-intensity focal spot. Importantly, the incoming laser beam is not affected by the particle position because the particle is outside the laser cavity. Here, we demonstrate that intracavity nonlinear feedback forces emerge when the particle is placed inside the optical cavity, resulting in orders-of-magnitude higher confinement along the three axes per unit laser intensity on the sample. This scheme allows trapping at very low numerical apertures and reduces the laser intensity to which the particle is exposed by two orders of magnitude compared to a standard 3D optical tweezers. These results are highly relevant for many applications requiring manipulation of samples that are subject to photodamage, such as in biophysics and nanosciences.

| S-EPMC6581956 | biostudies-literature

Low-volume label-free SARS-CoV-2 detection with the microcavity-based optical fiber sensor.

Project description:Accurate and fast detection of viruses is crucial for controlling outbreaks of many diseases; therefore, to date, numerous sensing systems for their detection have been studied. On top of the performance of these sensing systems, the availability of biorecognition elements specific to especially the new etiological agents is an additional fundamental challenge. Therefore, besides high sensitivity and selectivity, such advantages as the size of the sensor and possibly low volume of analyzed samples are also important, especially at the stage of evaluating the receptor-target interactions in the case of new etiological agents when typically, only tiny amounts of the receptor are available for testing. This work introduces a real-time, highly miniaturized sensing solution based on microcavity in-line Mach-Zehnder interferometer (μIMZI) induced in optical fiber for SARS-CoV-2 virus-like particles detection. The assay is designed to detect conserved regions of the SARS-CoV-2 viral particles in a sample with a volume as small as hundreds of picoliters, reaching the detection limit at the single ng per mL level.

| S-EPMC9880943 | biostudies-literature

Electrokinetic trapping at the one nanometer limit.

Project description:Anti-Brownian electrokinetic traps have been used to trap and study the free-solution dynamics of large protein complexes and long chains of DNA. Small molecules in solution have thus far proved too mobile to trap by any means. Here we explore the ultimate limits on trapping single molecules. We developed a feedback-based anti-Brownian electrokinetic trap in which classical thermal noise is compensated to the maximal extent allowed by quantum measurement noise. We trapped single fluorophores with a molecular weight of < 1 kDa and a hydrodynamic radius of 6.7 Å for longer than one second, in aqueous buffer at room temperature. This achievement represents an 800-fold decrease in the mass of objects trapped in solution, and opens the possibility to trap and manipulate any soluble molecule that can be fluorescently labeled. To illustrate the use of this trap, we studied the binding of unlabeled RecA to fluorescently labeled single-stranded DNA. Binding of RecA induced changes in the DNA diffusion coefficient, electrophoretic mobility, and brightness, all of which were measured simultaneously and on a molecule-by-molecule basis. This device greatly extends the size range of molecules that can be studied by room temperature feedback trapping, and opens the door to further studies of the binding of unmodified proteins to DNA in free solution.

| S-EPMC3107292 | biostudies-literature

Revisiting silk: a lens-free optical physical unclonable function.

Project description:For modern security, devices, individuals, and communications require unprecedentedly unique identifiers and cryptographic keys. One emerging method for guaranteeing digital security is to take advantage of a physical unclonable function. Surprisingly, native silk, which has been commonly utilized in everyday life as textiles, can be applied as a unique tag material, thereby removing the necessary apparatus for optical physical unclonable functions, such as an objective lens or a coherent light source. Randomly distributed fibers in silk generate spatially chaotic diffractions, forming self-focused spots on the millimeter scale. The silk-based physical unclonable function has a self-focusing, low-cost, and eco-friendly feature without relying on pre-/post-process for security tag creation. Using these properties, we implement a lens-free, optical, and portable physical unclonable function with silk identification cards and study its characteristics and reliability in a systemic manner. We further demonstrate the feasibility of the physical unclonable functions in two modes: authentication and data encryption.

| S-EPMC8752800 | biostudies-literature

Label-Free Plasmonic Detection of Untethered Nanometer-Sized Brownian Particles.

Project description:Optical detection of individual nanometer-sized analytes, virus particles, and protein molecules holds great promise for understanding and control of biological samples and healthcare applications. As fluorescent labels impose restrictions on detection bandwidth and require lengthy and invasive processes, label-free optical techniques are highly desirable. Here, we introduce an optical technique capable of transforming gold nanorods commonly used as photostable labels into highly localized high-speed probes. Our method detects single untethered 5 nm diameter gold particles as they traverse subattoliter volumes in Brownian motion with a time resolution below microseconds.

| S-EPMC7596787 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data