Dataset Information

Development of capillary liquid chromatography: A personal perspective.

ABSTRACT: This is a historical account on the development of capillary LC from its beginning to the present day. The first investigations into the viability of capillary LC date back to the late 1970s, a decade after the pioneering efforts in HPLC. The drastically reduced column dimensions were required to counter the slow solute diffusion in liquids. There were numerous instrumental difficulties with sample introduction and detection in the picoliter or even femtoliter volumes. High-efficiency separations were needed in the analysis of complex biological mixtures. Miniaturization brought distinct advantages in spectroscopic and electrochemical detection. Since the 1980s, column technologies underwent significant changes: (a) from glass-drawn microcapillaries to slurry-packed, small-diameter fused silica columns; and (b) in microcapillaries packed alternatively with sub-2-?m particles or monoliths. The viability of LC-MS combination has dramatically promoted the use of small-diameter capillaries. Through "omics technologies", capillary LC/tandem MS accounts for most applications in proteomics, glycomics and metabolomics.

SUBMITTER: Novotny MV

PROVIDER: S-EPMC5675780 | biostudies-other | 2017 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Development of capillary liquid chromatography: A personal perspective.

Novotny Milos V MV

Journal of chromatography. A 20170624

This is a historical account on the development of capillary LC from its beginning to the present day. The first investigations into the viability of capillary LC date back to the late 1970s, a decade after the pioneering efforts in HPLC. The drastically reduced column dimensions were required to counter the slow solute diffusion in liquids. There were numerous instrumental difficulties with sample introduction and detection in the picoliter or even femtoliter volumes. High-efficiency separation ...[more]

PMID: 28701267

Similar Datasets

Project description:Improvements in sample preparation, separation, and mass spectrometry continue to expand the coverage in LC-MS based lipidomics. While longer columns packed with smaller particles in theory give higher separation performance compared to shorter columns, the implementation of this technology above commercial limits has been sparse due to difficulties in packing long columns and successfully operating instruments at ultrahigh pressures. In this work, a liquid chromatograph that operates up to 35 kpsi was investigated for the separation and identification of lipid species from human plasma. Capillary columns between 15-50 cm long were packed with 1.7 µm BEH C18 particles and evaluated for their ability to separate lipid isomers and complex lipid extracts from human plasma. Putative lipid class identifications were assigned using accurate mass and relative retention time data of the eluting peaks. Our findings indicate that longer columns packed and operated at 35 kpsi outperform shorter columns packed and run at lower pressures in terms of peak capacity and numbers of features identified. Packing columns with relatively high concentration slurries (200 mg/mL) while sonicating the column resulted in 6-34% increase in peak capacity for 50 cm columns compared to lower slurry concentrations and no sonication. For a given analysis time, 50 cm long columns operated at 35 kpsi provided a 20-95% increase in chromatographic peak capacity compared with 15 cm columns operated at 15 kpsi. Analysis times up to 4 h were evaluated, generating peak capacities up to 410 ± 5 (n = 3, measured at 4σ) and identifying 480 ± 85 lipids (n = 2). Importantly, the results also show a correlation between the peak capacity and the number of lipids identified from a human plasma extract. This correlation indicates that ionization suppression is a limiting factor in obtaining sufficient signal for identification by mass spectrometry. The result also shows that the higher resolution obtained by shallow gradients overcomes possible signal reduction due to broader, more dilute peaks in long gradients for improving detection of lipids in LC-MS. Lastly, longer columns operated at shallow gradients allowed for the best separation of both regional and geometrical isomers. These results demonstrate a system that enables the advantages of using longer columns packed and run at ultrahigh pressure for improving lipid separations and lipidome coverage.

Project description:In this work we characterize the development of a method to enhance temperature-assisted on-column solute focusing (TASF) called two-stage TASF. A new instrument was built to implement two-stage TASF consisting of a linear array of three independent, electronically controlled Peltier devices (thermoelectric coolers, TECs). Samples are loaded onto the chromatographic column with the first two TECs, TEC A and TEC B, cold. In the two-stage TASF approach TECs A and B are cooled during injection. TEC A is heated following sample loading. At some time following TEC A's temperature rise, TEC B's temperature is increased from the focusing temperature to a temperature matching that of TEC A. Injection bands are focused twice on-column, first on the initial TEC, e.g. single-stage TASF, then refocused on the second, cold TEC. Our goal is to understand the two-stage TASF approach in detail. We have developed a simple yet powerful digital simulation procedure to model the effect of changing temperature in the two focusing zones on retention, band shape and band spreading. The simulation can predict experimental chromatograms resulting from spatial and temporal temperature programs in combination with isocratic and solvent gradient elution. To assess the two-stage TASF method and the accuracy of the simulation well characterized solutes are needed. Thus, retention factors were measured at six temperatures (25-75°C) at each of twelve mobile phases compositions (0.05-0.60 acetonitrile/water) for homologs of n-alkyl hydroxylbenzoate esters and n-alkyl p-hydroxyphenones. Simulations accurately reflect experimental results in showing that the two-stage approach improves separation quality. For example, two-stage TASF increased sensitivity for a low retention solute by a factor of 2.2 relative to single-stage TASF and 8.8 relative to isothermal conditions using isocratic elution. Gradient elution results for two-stage TASF were more encouraging. Application of two-stage TASF increased peak height for the least retained solute in the test mixture by a factor of 3.2 relative to single-stage TASF and 22.3 compared to isothermal conditions for an injection four-times the column volume. TASF improved resolution and increased peak capacity; for a 12-min separation peak capacity increased from 75 under isothermal conditions to 146 using single-stage TASF, and 185 for two-stage TASF.

Dataset Information

Development of capillary liquid chromatography: A personal perspective.

Publications

Development of capillary liquid chromatography: A personal perspective.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets