Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Facile Synthesis of Branch-Trunk Ag Hierarchical Nanostructures and Their Applications for High-Performance H?O? Electrochemical Sensors.

ABSTRACT: A novel branch-trunk Ag hierarchical nanostructure was synthesized via a galvanic replacement reaction combined with microwave-assisted synthesis using Te nanowire as a sacrificial template. The Te nanowire was synthesized via a hydrothermal process. We further investigated the potential application of the obtained hierarchical nanostructures in electrochemical sensor analysis. The results showed that the as-prepared sensor exhibited a wide linear range with 0.05 µM to 1.925 mM (R = 0.998) and the detection limit was estimated to be 0.013 µM (S/N = 3). These results indicate the branch-truck Ag hierarchical nanostructures are an excellent candidate material for sensing applications.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC5751687 | biostudies-other | 2017 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

The Facile Synthesis of Branch-Trunk Ag Hierarchical Nanostructures and Their Applications for High-Performance H₂O₂ Electrochemical Sensors.

Zhang Yan Y Chen Meiqiong M Cai Zhiquan Z Zhang Min M Liu Peng P Cheng Faliang F

Sensors (Basel, Switzerland) 20171213 12

A novel branch-trunk Ag hierarchical nanostructure was synthesized via a galvanic replacement reaction combined with microwave-assisted synthesis using Te nanowire as a sacrificial template. The Te nanowire was synthesized via a hydrothermal process. We further investigated the potential application of the obtained hierarchical nanostructures in electrochemical sensor analysis. The results showed that the as-prepared sensor exhibited a wide linear range with 0.05 µM to 1.925 mM (R = 0.998) and t ...[more]

PMID: 29236041

Similar Datasets

Facile synthesis of silver/silver thiocyanate (Ag@AgSCN) plasmonic nanostructures with enhanced photocatalytic performance.

Project description:A nanostructured plasmonic photocatalyst, silver/silver thiocyanate (Ag@AgSCN), has been prepared by a simple precipitation method followed by UV-light-induced reduction. The ratio of Ag to silver thiocyanate (AgSCN) can be controlled by simply adjusting the photo-induced reduction time. The formation mechanism of the product was investigated based on the time-dependent experiments. Further experiments indicated that the prepared Ag@AgSCN nanostructures with an atomic ratio of Ag/AgSCN = 0.0463 exhibited high photocatalytic activity and long-term stability for the degradation of oxytetracycline (84%) under visible-light irradiation. In addition to the microstructure and high specific surface area, the enhanced photocatalytic activity was mainly caused by the surface plasmon resonance of Ag nanoparticles, and the high stability of AgSCN resulted in the long-term stability of the photocatalyst product.

| S-EPMC5753043 | biostudies-literature

Hierarchical Si/ZnO trunk-branch nanostructure for photocurrent enhancement.

Project description:Hierarchical Si/ZnO trunk-branch nanostructures (NSs) have been synthesized by hot wire assisted chemical vapor deposition method for trunk Si nanowires (NWs) on indium tin oxide (ITO) substrate and followed by the vapor transport condensation (VTC) method for zinc oxide (ZnO) nanorods (NRs) which was laterally grown from each Si nanowires (NWs). A spin coating method has been used for zinc oxide (ZnO) seeding. This method is better compared with other group where they used sputtering method for the same process. The sputtering method only results in the growth of ZnO NRs on top of the Si trunk. Our method shows improvement by having the growth evenly distributed on the lateral sides and caps of the Si trunks, resulting in pine-leave-like NSs. Field emission scanning electron microscope image shows the hierarchical nanostructures resembling the shape of the leaves of pine trees. Single crystalline structure for the ZnO branch grown laterally from the crystalline Si trunk has been identified by using a lattice-resolved transmission electron microscope. A preliminary photoelectrochemical (PEC) cell testing has been setup to characterize the photocurrent of sole array of ZnO NR growth by both hydrothermal-grown (HTG) method and VTC method on ITO substrates. VTC-grown ZnO NRs showed greater photocurrent effect due to its better structural properties. The measured photocurrent was also compared with the array of hierarchical Si/ZnO trunk-branch NSs. The cell with the array of Si/ZnO trunk-branch NSs revealed four-fold magnitude enhancement in photocurrent density compared with the sole array of ZnO NRs obtain from VTC processes.

| S-EPMC4160322 | biostudies-literature

Facile Synthesis of SnS<sub>2</sub> Nanostructures with Different Morphologies for High-Performance Supercapacitor Applications.

Project description:SnS2 is an emerging candidate for an electrode material because of the considerable interlayer spaces in its crystal structures and the large surface area. SnS2 as a photocatalyst and in lithium ion batteries has been reported. On the other hand, there are only a few reports of their supercapacitor applications. In this study, sheetlike SnS2 (SL-SnS2), flowerlike SnS2 (FL-SnS2), and ellipsoid-like SnS2 (EL-SnS2) were fabricated via a facile solvothermal route using different types of solvents. The results suggested that the FL-SnS2 exhibited better capacitive performance than the SL-SnS2 and EL-SnS2, which means that the morphology has a significant effect on the electrochemical reaction. The FL-SnS2 displayed higher supercapacitor performance with a high capacity of approximately ∼431.82 F/g at a current density of 1 A/g. The remarkable electrochemical performance of the FL-SnS2 could be attributed to the large specific surface area and better average pore size. These results suggest that a suitable solvent is appropriate for the large-scale construction of SnS2 with different morphologies and also has huge potential in the practical applications of high-performance supercapacitors.

| S-EPMC6641318 | biostudies-literature

Hierarchical Ag Nanostructures Fabricated from Silver Coordination Polymers for Antibacterial Surface.

Project description:A hierarchical silver nanostructure with improved antibacterial property was fabricated utilizing silver coordination polymer. Octadecanethiolate?silver polymer was synthesized to have a layered structure and was coated on silicon wafer by drop-casting method utilizing hydrophobic?hydrophobic interaction. Thus, the silver coordination polymer was calcined under reductive condition to produce zero-valent silver with a hierarchical nanostructure. X-ray diffraction patterns revealed that layered silver coordination polymer successfully transformed to hexagonal silver upon calcination. According to scanning electron and atomic force microscopy, silver coordination polymer with ~145.5 nm size was homogeneously coated on the surface before calcination, and it evolved micrometer-sized lumps and grooves which were composed of ~58.8 nm sized Ag nanoparticles. The hierarchical structure-micrometer lump/groove consisting of Ag nanoparticles-would be advantageous to kill bacteria; micrometer-grooves provide physical condition (pocket for bacteria capture) and the Ag nanoparticles from the neighboring lump endow chemical condition (antibacterial property of released Ag?). The antibacterial activity test on Escherichia coli via colony forming inhibitory assay indeed exhibited an improved antibacterial activity of hierarchical Ag nanostructure compared with the surface simply coated with Ag nanoparticles. From the line profile of atomic force microscopy, the bacterium trapped in the hierarchical Ag nanostructure was shown to interact intimately with Ag surface.

| S-EPMC6401719 | biostudies-literature

Mesoporous onion-like carbon nanostructures from natural oil for high-performance supercapacitor and electrochemical sensing applications: Insights into the post-synthesis sonochemical treatment on the electrochemical performance.

Project description:Although onion-like carbon nanostructures (OLCs) are attractive materials for energy storage, their commercialization is hampered by the absence of a simple, cost-effective, large-scale synthesis route and binder-free electrode processing. The present study employs a scalable and straightforward technique to fabricate sonochemically tailored OLCs-based high-performance supercapacitor electrode material. An enhanced supercapacitive performance was demonstrated by the OLCs when sonicated in DMF at 60 °C for 15 min, with a specific capacitance of 647 F/g, capacitance retention of 97% for 5000 cycles, and a charge transfer resistance of 3 Ω. Furthermore, the OLCs were employed in the electrochemical quantification of methylene blue, a potential COVID-19 drug. The sensor demonstrated excellent analytical characteristics, including a linear range of 100 pM to 1000 pM, an ultralow sensitivity of 64.23 pM, and a high selectivity. When used to identify and quantify methylene blue in its pharmaceutical formulation, the sensor demonstrated excellent reproducibility, high stability, and satisfactory recovery.

| S-EPMC8482498 | biostudies-literature

Hierarchical Assembly of SnO2/ZnO Nanostructures for Enhanced Photocatalytic Performance.

Project description:SnO2/ZnO hierarchical heterostructures have been successfully synthesized by combining electrospinning technique and hydrothermal method. Various morphologies of the secondary ZnO nanostructures including nanorods (NRs) and nanosheets (NSs) can be tailored by adding surfactants. Photocatalytic performance of the heterostructures was investigated and obvious enhancement was demonstrated in degradation of the organic pollutant, compared to the primary SnO2-based nanofibers (NFs) and bare ZnO. Furthermore, it was found that the H2 evolution from water splitting was achieved by photocatalysis of heterostructured nanocomposites after sulfurization treatment. This synthetic methodology described herein promises to be an effective approach for fabricating variety of nanostructures for enhanced catalytic applications. The heterostructured nanomaterials have considerable potential to address the environmental and energy issues via degradation of pollutant and generation of clean H2 fuel.

| S-EPMC4479871 | biostudies-other

Facile and Label-Free Electrochemical Biosensors for MicroRNA Detection Based on DNA Origami Nanostructures.

Project description:MicroRNAs (miRNAs) have emerged as the promising molecular biomarkers for early diagnosis and enhanced understanding of the molecular pathogenesis of cancers as well as certain diseases. Here, a facile, label-free, and amplification-free electrochemical biosensor was developed to detect miRNA by using DNA origami nanostructure-supported DNA probes, with methylene blue (MB) serving as the hybridization redox indicator, for the first time. Specifically, the use of cross-shaped DNA origami nanostructures containing multiple single-stranded DNA probes at preselected locations on each DNA nanostructure could increase the accessibility and the recognition efficiency of the probes (due to the rational controlled density of DNA probes). The successful immobilization of DNA origami probes and their hybridization with targeted miRNA-21 molecules was confirmed by electrochemical impedance spectroscopy and cyclic voltammetry methods. A differential pulse voltammetry technique was employed to record the oxidation peak current of MB before and after target hybridization. The linear detection range of this biosensor was from 0.1 pM to 10.0 nM, with a lower detection limit of 79.8 fM. The selectivity of the miRNA biosensor was also studied by observing the discrimination ability of single-base mismatched sequences. Because of the larger surface area and unprecedented customizability of DNA origami nanostructures, this strategy demonstrated great potential for sensitive, selective, and label-free determination of miRNA for translational biomedical research and clinical applications.

| S-EPMC6649092 | biostudies-literature

Optical performance analysis of InP nanostructures for photovoltaic applications.

Project description:In this article, we have performed a comparative analysis of six different types of nanostructures that can improve photon management for photovoltaic applications. These nanostructures act as anti-reflective structures by improving the absorption characteristics and tailoring the optoelectronic properties of the associated devices. The absorption enhancement in indium phosphide (InP) and silicon (Si) based cylindrical nanowires (CNWs) and rectangular nanowires (RNWs), truncated nanocones (TNCs), truncated nanopyramids (TNPs), inverted truncated nanocones (ITNCs), and inverted truncated nanopyramids (ITNPs) are computed using the finite element method (FEM) based commercial COMSOL Multiphysics package. The influence of geometrical dimensions of the investigated nanostructures such as period (P), diameter (D), width (W), filling ratio (FR), bottom W and D (W bot/D bot), and top W and D (W top/D top) on the optical performance are analyzed in detail. Optical short circuit current density (J sc) is computed using the absorption spectra. The results of numerical simulations indicate that InP nanostructures are optically superior to Si nanostructures. In addition to this, the InP TNP generates an optical short circuit current density (J sc) of 34.28 mA cm-2, which is ∼10 mA cm-2 higher than its Si counterpart. The effect of incident angle on the ultimate efficiency of the investigated nanostructures in transverse electric (TE) and transverse magnetic (TM) modes is also explored. Theoretical insights into the design strategies of different nanostructures proposed in this article will act as a benchmark for choosing the device dimensions of appropriate nanostructures for the fabrication of efficient photovoltaic devices.

| S-EPMC10051016 | biostudies-literature

CuO-Decorated ZnO Hierarchical Nanostructures as Efficient and Established Sensing Materials for H2S Gas Sensors.

Project description:Highly sensitive hydrogen sulfide (H2S) gas sensors were developed from CuO-decorated ZnO semiconducting hierarchical nanostructures. The ZnO hierarchical nanostructure was fabricated by an electrospinning method following hydrothermal and heat treatment. CuO decoration of ZnO hierarchical structures was carried out by a wet method. The H2S gas-sensing properties were examined at different working temperatures using various quantities of CuO as the variable. CuO decoration of the ZnO hierarchical structure was observed to promote sensitivity for H2S gas higher than 30 times at low working temperature (200 °C) compared with that in the nondecorated hierarchical structure. The sensing mechanism of the hybrid sensor structure is also discussed. The morphology and characteristics of the samples were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis absorption, photoluminescence (PL), and electrical measurements.

| S-EPMC4882619 | biostudies-literature

Hierarchical Aerographite 3D flexible networks hybridized by InP micro/nanostructures for strain sensor applications.

Project description:In the present work, we report on development of three-dimensional flexible architectures consisting of an extremely porous three-dimensional Aerographite (AG) backbone decorated by InP micro/nanocrystallites grown by a single step hydride vapor phase epitaxy process. The systematic investigation of the hybrid materials by scanning electron microscopy demonstrates a rather uniform spatial distribution of InP crystallites without agglomeration on the surface of Aerographite microtubular structures. X-ray diffraction, transmission electron microscopy and Raman scattering analysis demonstrate that InP crystallites grown on bare Aerographite are of zincblende structure, while a preliminary functionalization of the Aerographite backbone with Au nanodots promotes the formation of crystalline In2O3 nanowires as well as gold-indium oxide core-shell nanostructures. The electromechanical properties of the hybrid AG-InP composite material are shown to be better than those of previously reported bare AG and AG-GaN networks. Robustness, elastic behavior and excellent translation of the mechanical deformation to variations in electrical conductivity highlight the prospects of AG-InP applications in tactile/strain sensors and other device structures related to flexible electronics.

| S-EPMC6141564 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data