Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bonding dissimilar polymer networks in various manufacturing processes.

ABSTRACT: Recently developed devices mimic neuromuscular and neurosensory systems by integrating hydrogels and hydrophobic elastomers. While different methods are developed to bond hydrogels with hydrophobic elastomers, it remains a challenge to coat and print various hydrogels and elastomers of arbitrary shapes, in arbitrary sequences, with strong adhesion. Here we report an approach to meet this challenge. We mix silane coupling agents into the precursors of the networks, and tune the kinetics such that, when the networks form, the coupling agents incorporate into the polymer chains, but do not condensate. After a manufacturing step, the coupling agents condensate, add crosslinks inside the networks, and form bonds between the networks. This approach enables independent bonding and manufacturing. We formulate oxygen-tolerant hydrogel resins for spinning, printing, and coating in the open air. We find that thin elastomer coatings enable hydrogels to sustain high temperatures without boiling.

SUBMITTER: Liu Q

PROVIDER: S-EPMC5829243 | biostudies-other | 2018 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Bonding dissimilar polymer networks in various manufacturing processes.

Liu Qihan Q Nian Guodong G Yang Canhui C Qu Shaoxing S Suo Zhigang Z

Nature communications 20180227 1

Recently developed devices mimic neuromuscular and neurosensory systems by integrating hydrogels and hydrophobic elastomers. While different methods are developed to bond hydrogels with hydrophobic elastomers, it remains a challenge to coat and print various hydrogels and elastomers of arbitrary shapes, in arbitrary sequences, with strong adhesion. Here we report an approach to meet this challenge. We mix silane coupling agents into the precursors of the networks, and tune the kinetics such that ...[more]

PMID: 29487342

Similar Datasets

Project description:The epoxy monolith with a highly porous structure is fabricated by the thermal curing of 2,2-bis(4-glycidyloxyphenyl)propane and 4,4'-methylenebis(cyclohexylamine) in the presence of poly(ethylene glycol) as the porogen via polymerization-induced phase separation. In this study, we demonstrated a new type of dissimilar material bonding method for various polymers and metals coated with the epoxy monolith. On the basis of scanning electron microscopy (SEM) observations, the pore size and number of epoxy monoliths were evaluated to be 1.1-114 μm and 8.7-48 200 mm-2, respectively, depending on the ratio of the epoxy resin and cross-linking agent used for the monolith fabrication. Various kinds of thermoplastics, such as polyethylene, polypropylene, polyoxymethylene, acrylonitrile-butadiene-styrene copolymer, polycarbonate bisphenol-A, and poly(ethylene terephthalate), were bonded to the monolith-modified metal plates by thermal welding. The bond strength for the single lap-shear tensile test of stainless steel and copper plates with the thermoplastics was in the range of 1.2-7.5 MPa, which was greater than the bond strength value for each bonding system without monolith modification. The SEM observation of fractured test pieces directly confirmed an anchor effect on this bonding system. The elongated deformation of the plastics that filled in the pores of the epoxy monolith, was observed. It was concluded that the bond strength significantly depended on the intrinsic strength of the used thermoplastics. The epoxy monolith bonding of hard plastics, such as polystyrene and poly(methyl methacrylate), was performed by the additional use of adhesives, solvents, and a reactive monomer. The epoxy monolith sheets were also successfully fabricated and applied to dissimilar material bonding.

| S-EPMC6644695 | biostudies-literature

New GMP manufacturing processes to obtain thermostable HIV-1 gp41 virosomes under solid forms for various mucosal vaccination routes.

Project description:The main objective of the MACIVIVA European consortium was to develop new Good Manufacturing Practice pilot lines for manufacturing thermostable vaccines with stabilized antigens on influenza virosomes as enveloped virus-like particles. The HIV-1 gp41-derived antigens anchored in the virosome membrane, along with the adjuvant 3M-052 (TLR7/8 agonist) on the same particle, served as a candidate vaccine for the proof of concept for establishing manufacturing processes, which can be directly applied or adapted to other virosomal vaccines or lipid-based particles. Heat spray-dried powders suitable for nasal or oral delivery, and freeze-dried sublingual tablets were successfully developed as solid dosage forms for mucosal vaccination. The antigenic properties of vaccinal antigens with key gp41 epitopes were maintained, preserving the original immunogenicity of the starting liquid form, and also when solid forms were exposed to high temperature (40 °C) for up to 3 months, with minimal antigen and adjuvant content variation. Virosomes reconstituted from the powder forms remained as free particles with similar size, virosome uptake by antigen-presenting cells in vitro was comparable to virosomes from the liquid form, and the presence of excipients specific to each solid form did not prevent virosome transport to the draining lymph nodes of immunized mice. Virosome integrity was also preserved during exposure to <-15 °C, mimicking accidental freezing conditions. These "ready to use and all-in-one" thermostable needle-free virosomal HIV-1 mucosal vaccines offer the advantage of simplified logistics with a lower dependence on the cold chain during shipments and distribution.

| S-EPMC7235025 | biostudies-literature

Deterministic processes vary during community assembly for ecologically dissimilar taxa.

Project description:The continuum hypothesis states that both deterministic and stochastic processes contribute to the assembly of ecological communities. However, the contextual dependency of these processes remains an open question that imposes strong limitations on predictions of community responses to environmental change. Here we measure community and habitat turnover across multiple vertical soil horizons at 183 sites across Scotland for bacteria and fungi, both dominant and functionally vital components of all soils but which differ substantially in their growth habit and dispersal capability. We find that habitat turnover is the primary driver of bacterial community turnover in general, although its importance decreases with increasing isolation and disturbance. Fungal communities, however, exhibit a highly stochastic assembly process, both neutral and non-neutral in nature, largely independent of disturbance. These findings suggest that increased focus on dispersal limitation and biotic interactions are necessary to manage and conserve the key ecosystem services provided by these assemblages.

| S-EPMC4600744 | biostudies-literature

Clinical-grade mesenchymal stromal cells produced under various good manufacturing practice processes differ in their immunomodulatory properties: standardization of immune quality controls.

Project description:Clinical-grade mesenchymal stromal cells (MSCs) are usually expanded from bone marrow (BMMSCs) or adipose tissue (ADSCs) using processes mainly differing in the use of fetal calf serum (FCS) or human platelet lysate (PL). We aimed to compare immune modulatory properties of clinical-grade MSCs using a combination of fully standardized in vitro assays. BMMSCs expanded with FCS (BMMSC-FCS) or PL (BMMSC-PL), and ADSC-PL were analyzed in quantitative phenotypic and functional experiments, including their capacity to inhibit the proliferation of T, B, and NK cells. The molecular mechanisms supporting T-cell inhibition were investigated. These parameters were also evaluated after pre-stimulation of MSCs with inflammatory cytokines. BMMSC-FCS, BMMSC-PL, and ADSC-PL displayed significant differences in expression of immunosuppressive and adhesion molecules. Standardized functional assays revealed that resting MSCs inhibited proliferation of T and NK cells, but not B cells. ADSC-PL were the most potent in inhibiting T-cell growth, a property ascribed to interferon-?-dependent indoleamine 2,3-dioxygenase activity. MSCs did not stimulate allogeneic T cell proliferation but were efficiently lysed by activated NK cells. The systematic use of quantitative and reproducible validation techniques highlights differences in immunological properties of MSCs produced using various clinical-grade processes. ADSC-PL emerge as a promising candidate for future clinical trials.

| S-EPMC3668498 | biostudies-literature

Efficient Bayesian Function Optimization of Evolving Material Manufacturing Processes.

Project description:The scale-up of laboratory procedures to industrial production is the main challenge standing between ideation and the successful introduction of novel materials into commercial products. Retaining quality while ensuring high per-batch production yields is the main challenge. Batch processing and other dynamic strategies that preserve product quality can be applied, but they typically involve a variety of experimental parameters and functions that are difficult to optimize because of interdependencies that are often antagonistic. Adaptive Bayesian optimization is demonstrated here as a valuable support tool in increasing both the per-batch yield and quality of short polymer fibers, produced by wet spinning and shear dispersion methods. Through this approach, it is shown that short fiber dispersions with high yield and a specified, targeted fiber length distribution can be obtained with minimal cost of optimization, starting from sub-optimal processing conditions and minimal prior knowledge. The Bayesian function optimization demonstrated here for batch processing could be applied to other dynamic scale-up methods as well as to cases presenting higher dimensional challenges such as shape and structure optimization. This work shows the great potential of synergies between industrial processing, material engineering, and machine learning perspectives.

| S-EPMC6906790 | biostudies-literature

One-step volumetric additive manufacturing of complex polymer structures.

Project description:Two limitations of additive manufacturing methods that arise from layer-based fabrication are slow speed and geometric constraints (which include poor surface quality). Both limitations are overcome in the work reported here, introducing a new volumetric additive fabrication paradigm that produces photopolymer structures with complex nonperiodic three-dimensional geometries on a time scale of seconds. We implement this approach using holographic patterning of light fields, demonstrate the fabrication of a variety of structures, and study the properties of the light patterns and photosensitive resins required for this fabrication approach. The results indicate that low-absorbing resins containing ~0.1% photoinitiator, illuminated at modest powers (~10 to 100 mW), may be successfully used to build full structures in ~1 to 10 s.

| S-EPMC5724355 | biostudies-literature

Resource shifts in Malagasy dung beetles: contrasting processes revealed by dissimilar spatial genetic patterns.

Project description:The endemic dung beetle subtribe Helictopleurina has 65 species mostly in wet forests in eastern Madagascar. There are no extant native ungulates in Madagascar, but three Helictopleurus species have shifted to the introduced cattle dung in open habitats in the past 1500 years. Helictopleurus neoamplicollis and Helictopleurus marsyas exhibit very limited cytochrome oxidase subunit 1 haplotype diversity and a single haplotype is present across Madagascar, suggesting that these species shifted to cattle dung in a small region followed by rapid range expansion. In contrast, patterns of molecular diversity in Helictopleurus quadripunctatus indicate a gradual diet shift across most of southern Madagascar, consistent with somewhat broader diet in this species. The three cattle dung-using Helictopleurus species have significantly greater geographical ranges than the forest-dwelling species, apparently because the shift to the currently very abundant new resource relaxed interspecific competition that hinders range expansion in the forest species.

| S-EPMC2613235 | biostudies-literature

Influenza Vaccine Manufacturing: Effect of Inactivation, Splitting and Site of Manufacturing. Comparison of Influenza Vaccine Production Processes.

Project description:The aim of this study was to evaluate the impact of different inactivation and splitting procedures on influenza vaccine product composition, stability and recovery to support transfer of process technology. Four split and two whole inactivated virus (WIV) influenza vaccine bulks were produced and compared with respect to release criteria, stability of the bulk and haemagglutinin recovery. One clarified harvest of influenza H3N2 A/Uruguay virus prepared on 25.000 fertilized eggs was divided equally over six downstream processes. The main unit operation for purification was sucrose gradient zonal ultracentrifugation. The inactivation of the virus was performed with either formaldehyde in phosphate buffer or with beta-propiolactone in citrate buffer. For splitting of the viral products in presence of Tween®, either Triton™ X-100 or di-ethyl-ether was used. Removal of ether was established by centrifugation and evaporation, whereas removal of Triton-X100 was performed by hydrophobic interaction chromatography. All products were sterile filtered and subjected to a 5 months real time stability study. In all processes, major product losses were measured after sterile filtration; with larger losses for split virus than for WIV. The beta-propiolactone inactivation on average resulted in higher recoveries compared to processes using formaldehyde inactivation. Especially ether split formaldehyde product showed low recovery and least stability over a period of five months.

| S-EPMC4784929 | biostudies-literature

Ultrafast X-ray imaging of laser-metal additive manufacturing processes.

Project description:The high-speed synchrotron X-ray imaging technique was synchronized with a custom-built laser-melting setup to capture the dynamics of laser powder-bed fusion processes in situ. Various significant phenomena, including vapor-depression and melt-pool dynamics and powder-spatter ejection, were captured with high spatial and temporal resolution. Imaging frame rates of up to 10 MHz were used to capture the rapid changes in these highly dynamic phenomena. At the same time, relatively slow frame rates were employed to capture large-scale changes during the process. This experimental platform will be vital in the further understanding of laser additive manufacturing processes and will be particularly helpful in guiding efforts to reduce or eliminate microstructural defects in additively manufactured parts.

| S-EPMC6544194 | biostudies-literature

Optimizing CAR-T Cell Manufacturing Processes during Pivotal Clinical Trials.

Project description:Tisagenlecleucel is a CD19-specific chimeric antigen receptor (CAR)-T cell therapy approved for patients aged ≤25 years with relapsed or refractory B cell precursor acute lymphoblastic leukemia (B-ALL) and adults with relapsed or refractory diffuse large B cell lymphoma (DLBCL). The initial tisagenlecleucel manufacturing process technology was developed at an academic center and was subsequently transferred, optimized, validated, and scaled out to supply large global trials before commercialization. Tisagenlecleucel manufactured in two centralized facilities has been successfully used in global multicenter trials for B-ALL and DLBCL (>50 clinical centers in 12 countries). In this paper, we describe some of the continuous process improvements made to tisagenlecleucel manufacturing over time to meet global demand while maintaining and improving product quality. During early tisagenlecleucel clinical trials, process enhancements were made to address logistical challenges related to manufacturing for multicenter trials and to accommodate the variability observed in patient starting cellular material. These enhancements resulted in improvements in manufacturing capacity, process robustness, manufacturing success rates, and product quality, and reductions in throughput time. In summary, through continuous evaluation and improvements based on experience during global trials, a consistent and robust commercial manufacturing process for tisagenlecleucel has been developed, leading to improvements in manufacturing success when compared to the initial processes.

| S-EPMC6970133 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data