Renormalization of the critical exponent for the shear modulus of magnetoactive elastomers.
Ontology highlight
ABSTRACT:
SUBMITTER: Snarskii AA
PROVIDER: S-EPMC5849735 | biostudies-other | 2018 Mar
REPOSITORIES: biostudies-other
Publications
Renormalization of the critical exponent for the shear modulus of magnetoactive elastomers.
Snarskii Andrei A AA Kalita Viktor M VM Shamonin Mikhail M
Scientific reports 20180313 1
It is shown that the critical exponent for the effective shear modulus of a composite medium where a compliant polymer matrix is filled with ferromagnetic particles may significantly depend on the external magnetic field. The physical consequence of this dependence is the critical behavior of the relative magnetorheological effect. ...[more]
Similar Datasets
Project description:The mechanical match between synthetic scaffold and host tissue remains challenging in tissue regeneration. The elastic soft tissues exhibit low initial moduli with a J-shaped tensile curve. Suitable synthetic polymer scaffolds require low initial modulus and elasticity. To achieve these requirements, random copolymers poly(δ-valerolactone-co-ε-caprolactone) (PVCL) and hydrophilic poly(ethylene glycol) (PEG) were combined into a triblock copolymer, PVCL-PEG-PVCL, which was used as a soft segment to synthesize a family of biodegradable elastomeric polyurethanes (PU) with low initial moduli. The triblock copolymers were varied in chemical components, molecular weights, and hydrophilicities. The mechanical properties of polyurethanes in dry and wet states can be tuned by altering the molecular weights and hydrophilicities of the soft segments. Increasing the length of either PVCL or PEG in the soft segments reduced initial moduli of the polyurethane films and scaffolds in dry and wet states. The polymer films are found to have good cell compatibility and to support fibroblast growth in vitro. Selected polyurethanes were processed into porous scaffolds by a thermally induced phase-separation technique. The scaffold from PU-PEG1K-PVCL6K had an initial modulus of 0.60 ± 0.14 MPa, which is comparable with the initial modulus of human myocardium (0.02-0.50 MPa). In vivo mouse subcutaneous implantation of the porous scaffolds showed minimal chronic inflammatory response and intensive cell infiltration, which indicated good tissue compatibility of the scaffolds. Biodegradable polyurethane elastomers with low initial modulus and good biocompatibility and processability would be an attractive alternative scaffold material for soft tissue regeneration, especially for heart muscle.
| S-EPMC7479969 | biostudies-literature
Project description:A pair of mutually attractive but self-repulsive decapeptides, with alternating charged/neutral amino acid sequence patterns, was found to co-assemble into a viscoelastic material upon mixing at a low total peptide concentration of 0.25 wt %. Circular dichroism spectroscopy of individual decapeptide solutions revealed their random coil conformation. Transmission electron microscopy images showed the nanofibrillar network structure of the hydrogel. Dynamic rheological characterization revealed its high elasticity and shear-thinning nature. Furthermore, the co-assembled hydrogel was capable of rapid recoveries from repeated shear-induced breakdowns, a property desirable for designing injectable biomaterials for controlled drug delivery and tissue engineering applications. A systematic variation of the neutral amino acids in the sequence revealed some of the design principles for this class of biomaterials. First, viscoelastic properties of the hydrogels can be tuned through adjusting the hydrophobicity of the neutral amino acids. Second, the beta-sheet propensity of the neutral amino acid residue in the peptides is critical for hydrogelation.
| S-EPMC1475511 | biostudies-literature
Project description:Unlike the constant nature of elastic coefficients of isotropic bulk materials, the Young's (E) and shear (μ) moduli of nano-structured (NS) gyroid metamaterials change with relative density (ρ), but at different rates depending on the cell size of the structure. These elastic behaviors displayed by E and μ cause crossover/inversion of these two moduli, such that μ of the NS gyroid metamaterials is greater than E for the structures with ρ < 0.23. This peculiar elastic behavior causes NS gyroid metamaterials to display high μ/E values (~1.0), which are more than 250% larger than the typical values of the bulk material (~0.38), indicating that the NS gyroid metamaterial, even if it is light, is resistant to shear deformation. Here, we report the results of molecular dynamics simulations performed to elucidate the reason for unusually high μ/E values in NS gyroid metamaterials.
| S-EPMC5585398 | biostudies-literature
Project description:We propose an integrated method combining low-frequency mechanics with optical imaging to map the shear modulus within the biological tissue. Induced shear wave propagating in tissue is tracked in space and time using phase-sensitive optical coherence tomography (PhS-OCT). Local estimates of the shear-wave speed obtained from tracking results can image the local shear modulus. A PhS-OCT system remotely records depth-resolved, dynamic mechanical waves at an equivalent frame rate of ?47??kHz with the high spatial resolution. The proposed method was validated by examining tissue-mimicking phantoms made of agar and light scattering material. Results demonstrate that the shear wave imaging can accurately map the elastic moduli of these phantoms.
| S-EPMC4019419 | biostudies-literature
Project description:It is found that the NMR relaxation rates of diffusants in peptide hydrogels have a linear dependency on the shear modulus of the hydrogels. This finding opens the door for non-invasive and forceless mechanical characterizations of materials and tissues using NMR and MRI.
| S-EPMC3266745 | biostudies-literature
Project description:In a description of materials for orthotropic panels with a soft and/or corrugated core, it is important to correctly determine all constitutive parameters. In laboratory practice, the determination of transverse shear modulus is often overlooked. This paper presents a method for determining this property based on a plate torsion test and a correctly formulated analytical description. It has been proved that the transverse shear effect in some cases cannot be omitted because it significantly influences the mechanical behavior of corrugated board. The method of transverse shear modeling used so far can be modified to eliminate dimensionless, physically unjustified coefficient and replace them with coefficients that have a physical basis. It is shown here that such modification leads to results with lower error. The effective modeling of transverse shear effects enables a more conscious design of corrugated board structures, where the final goal is to obtain packaging with high strength and durability but low material consumption.
| S-EPMC7504672 | biostudies-literature
Project description:Dynamic elastography is an attractive method to evaluate tissue biomechanical properties. Recently, it was extended from US- and MR-based modalities to optical ones, such as optical coherence tomography for three-dimensional (3-D) imaging of propagating mechanical waves in subsurface regions of soft tissues, such as the eye. The measured group velocity is often used to convert wave speed maps into 3-D images of the elastic modulus distribution based on the assumption of bulk shear waves. However, the specific geometry of OCE measurements in bounded materials such as the cornea and skin calls into question elasticity reconstruction assuming a simple relationship between group velocity and shear modulus. We show that in layered media the bulk shear wave assumption results in highly underestimated shear modulus reconstructions and significant structural artifacts in modulus images. We urge the OCE community to be careful in using the group velocity to evaluate tissue elasticity and to focus on developing robust reconstruction methods to accurately reconstruct images of the shear elastic modulus in bounded media.
| S-EPMC6650747 | biostudies-literature
Project description:The paper describes a program of mechanical testing on donated human eye bank lenses. The principal purpose of the tests was to obtain experimental data on the shear modulus of the lens for use in future computational models of the accommodation process. Testing was conducted using a procedure in which deformations are induced in the lens by spinning it about its polar axis. Shear modulus data were inferred from these observed deformations by means of a finite element inverse analysis procedure in which the spatial variation of the shear modulus within the lens is represented by an appropriate function (see Burd et al., 2011 for a detailed specification of the design of the spinning lens test rig, experimental protocols and associated data analysis procedures that were employed in the tests). Inferred data on lens shear modulus are presented for a set of twenty-nine lenses in the age range 12 years to 58 years. The lenses were tested between 47 h and 110 h from the time of death (average post-mortem time 74 h). Care was taken to exclude any lenses that had been affected by excessive post-mortem swelling, or any lenses that had suffered mechanical damage during storage, transit or the testing process. The experimental data on shear modulus indicate that, for young lenses, the cortex is stiffer than the nucleus. The shear modulus of the nucleus and cortex both increase with increasing age. The shear modulus of the nucleus increases more rapidly than the cortex with the consequence that from an age of about 45 years onwards the nucleus is stiffer than the cortex. The principal shear modulus data presented in the paper were obtained by testing at a rotational speed of 1,000 rpm. Supplementary tests were conducted at rotational speeds of 700 rpm and 1,400 rpm. The results from these supplementary tests are in good agreement with the data obtained from the principal 1,000 rpm tests. Studies on the possible effects of lens drying during the test suggested that this factor is unlikely to have led to significant errors in the experimental determination of the shear modulus. The shear modulus data presented in the paper are used to develop 'age-stiffness' models to represent the shear modulus of the lens as a function of age. These models are in a form that may be readily incorporated in a finite element model of the accommodation process. A comparison is attempted between the shear modulus data presented in the current paper and equivalent data published by previous authors. This comparison highlights various limitations and inconsistencies in the data sets.
| S-EPMC3405528 | biostudies-literature
Project description:Corneal stiffness plays a critical role in shaping the cornea with respect to intraocular pressure and physical interventions. However, it remains difficult to measure the mechanical properties noninvasively. Here, we report the first measurement of shear modulus in human corneas in vivo using optical coherence elastography (OCE) based on surface elastic waves. In a pilot study of 12 healthy subjects aged between 25 and 67, the Rayleigh-wave speed was 7.86 ± 0.75 m/s, corresponding to a shear modulus of 72 ± 14 kPa. Our data reveal two unexpected trends: no correlation was found between the wave speed and IOP between 13-18 mmHg, and shear modulus decreases with age (- 0.32 ± 0.17 m/s per decade). We propose that shear stiffness is governed by the interfibrillar matrix, whereas tensile strength is dominated by collagen fibrils. Rayleigh-wave OCE may prove useful for clinical diagnosis, refractive surgeries, and treatment monitoring.
| S-EPMC7567833 | biostudies-literature
Project description:Numerical simulations of seismic site response require the characterization of the nonlinear behaviour of shallow subsoil. When extensive evaluations are of concern, as in the case of seismic microzonation studies, funding problems prevent from the systematic use of laboratory tests to provide detailed evaluations. For this purpose, 485 shear modulus reduction, G\G0(γ) and damping ratio, D(γ) curves were collected from multiple literature sources available in Italy. Each curve was associated with the related engineering geological units considered in seismic microzonation studies. A statistical analysis of the data was carried out with the aim of shedding light on the significant difference between the laboratory classification of samples and the macroscopic/engineering geological one, provided during seismic microzonation studies. Since the engineering geological classification plays a prominent role in extensive site response evaluations, the outcomes of the present work may be of help at least when preliminary seismic response estimates are of concern. The dataset provides reference information that can serve as key data for large-scale hazard assessments worldwide.
| S-EPMC10502119 | biostudies-literature