Dataset Information

Clinical experience with planning, quality assurance, and delivery of burst-mode modulated arc therapy.

ABSTRACT: "Burst-mode" modulated arc therapy (hereafter referred to as "mARC") is a form of volumetric-modulated arc therapy characterized by variable gantry rotation speed, static MLCs while the radiation beam is on, and MLC repositioning while the beam is off. We present our clinical experience with the planning techniques and plan quality assurance measurements of mARC delivery. Clinical mARC plans for five representative cases (prostate, low-dose-rate brain, brain with partial-arc vertex fields, pancreas, and liver SBRT) were generated using a Monte Carlo-based treatment planning system. A conventional-dose-rate flat 6 MV and a high-dose-rate non-flat 7 MV beam are available for planning and delivery. mARC plans for intact-prostate cases can typically be created using one 360° arc, and treatment times per fraction seldom exceed 6 min using the flat beam; using the nonflat beam results in slightly higher MU per fraction, but also in delivery times less than 4 min and with reduced mean dose to distal organs at risk. mARC also has utility in low-dose-rate brain irradiation; mARC fields can be designed which deliver a uniform 20 cGy dose to the PTV in approximately 3-minute intervals, making it a viable alternative to conventional 3D CRT. For brain cases using noncoplanar arcs, delivery time is approximately six min using the nonflat beam. For pancreas cases using the nonflat beam, two overlapping 360° arcs are required, and delivery times are approximately 10 min. For liver SBRT, the time to deliver 800 cGy per frac-tion is at least 12 min. Plan QA measurements indicate that the mARC delivery is consistent with the plan calculation for all cases. mARC has been incorporated into routine practice within our clinic; currently, on average approximately 15 patients per day are treated using mARC; and with the exception of LDR brain cases, all are treated using the nonflat beam.

SUBMITTER: Kainz K

PROVIDER: S-EPMC5874115 | biostudies-other | 2016 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Clinical experience with planning, quality assurance, and delivery of burst-mode modulated arc therapy.

Kainz Kristofer K Prah Douglas D Ahunbay Ergun E Li X Allen XA

Journal of applied clinical medical physics 20160908 5

"Burst-mode" modulated arc therapy (hereafter referred to as "mARC") is a form of volumetric-modulated arc therapy characterized by variable gantry rotation speed, static MLCs while the radiation beam is on, and MLC repositioning while the beam is off. We present our clinical experience with the planning techniques and plan quality assurance measurements of mARC delivery. Clinical mARC plans for five representative cases (prostate, low-dose-rate brain, brain with partial-arc vertex fields, pancr ...[more]

PMID: 27685123

Similar Datasets

Project description:In radiotherapy, air-filled ion chamber detectors are ubiquitously used in routine dose measurements for treatment planning. However, its use has been restricted by intrinsic low spatial resolution barriers. We developed one procedure for patient-specific quality assurance (QA) in arc radiotherapy by coalescing two adjacent measurement images into a single image to improve spatial resolution and sampling frequency, and investigated how different spatial resolutions affect the QA results. PTW 729 and 1500 ion chamber detectors were used for dosimetric verification via coalescing two measurements with 5 mm-couch shift and the isocenter, and only isocenter measurement, which we call coalescence and standard acquisition (SA). Statistical process control (SPC), process capability analysis (PCA), and receiver operating characteristic (ROC) curve were used to compare the performance of the two procedures in determining tolerance levels and identifying clinically relevant errors. By analyzing 1256 γ values calculated on interpolated data points, our results indicated that detector 1500 showed higher averages in coalescence cohorts at different tolerance criteria and the dispersion degrees were spread out smaller. Detector 729 yielded a slightly lower process capability of 0.79, 0.76, 1.10, and 1.34, but detector 1500 exhibited somewhat different results of 0.94, 1.42, 1.19, and 1.60 in magnitude. The results of SPC individual control chart showed that cases in coalescence cohorts with γ values lowering its lower control limit (LCL) were greater than those in SA cohorts for detector 1500. A combination of the width of multi-leaf collimator (MLC) leaf, the cross-sectional area of the single detector, and the spacing between adjacent detectors might lead to discrepancies in percent γ values across diverse spatial resolution scenarios. The accuracy of reconstructed volume dose is mainly determined by the interpolation algorithm used in dosimetric systems. The magnitude of filling factor in the ion chamber detectors determined its ability to detect dose deviations. SPC and PCA results indicated that coalescence procedure could detect more potential failure QA results than SA while enhancing action thresholds.

Project description:PurposeTo create and to validate knowledge-based volumetric modulated arc therapy (VMAT) models for breast cancer treatments without lymph node irradiation.Materials and methodsOne hundred VMAT-based breast plans (manual plans [MP]) were selected to create two knowledge-based VMAT models (breast left and breast right) using RapidPlan™. The plans were generated on Eclipse v15.5 (Varian Medical Systems, Palo Alto, CA) with 6 MV of a Novalis Tx equipped with a high-resolution multileaf collimator. The models were verified based on goodness-of-fit statistics using the coefficients of determination (R 2) and Chi-square (χ2), and the goodness-of-estimation statistics through the mean square error (MSE). Geometrical and dosimetrical constraints were identified and removed from the RP models using statistical evaluation metrics and plots. For validation, 20 plans that integrate the models and 20 plans that do not were reoptimized with RP (closed and opened validation). Dosimetrical parameters of interest were used to compare MP versus RP plans for the Heart, Homolateral_Lung, Contralateral_Lung, and Contralateral_Breast. Optimization planning time and user independency were also analyzed.ResultsThe most unfavorable results of R2 in both models for the organs at risk were as follows: for Contralateral_Lung 0.51 in RP right breast (RP_RB) and for Heart 0.60 in RP left breast (RP_LB). The most unfavorable results of χ2 test were: for Contralateral_Breast 1.02 in RP_RB and for Heart 1.03 in RP_LB. These goodness-of-fit results show that no overfitting occurred in either of the models. There were no unfavorable results of mean square error (MSE, all < 0.05) in any of the two models. These goodness-of-estimation results show that the models have good estimation power. For closed validation, significant differences were found in RP_RB for Homolateral_Lung (all P ≤ 0.001), and in the RP_LB differences were found for the heart (all P ≤ 0.04) and for Homolateral_Lung (all P ≤ 0.022). For open validation, no statistically significant differences were obtained in either of the models. RP models had little impact on reducing optimization planning times for expert planners; nevertheless, the result showed a 30% reduction time for beginner planners. The use of RP models generates high-quality plans, without differences from the planner experience.ConclusionTwo RP models for breast cancer treatment using VMAT were successfully implemented. The use of RP models for breast cancer reduces the optimization planning time and improves the efficiency of the treatment planning process while ensuring high-quality plans.

Project description:PurposeTo perform quality assurance of non-coplanar, volumetric-modulated arc therapy featuring continuous couch rotation (CCR-VMAT) using a C-arm linear accelerator.MethodsWe planned and delivered CCR-VMAT using the TrueBeam Developer Mode. Treatment plans were created for both a C-shaped phantom and five prostate cancer patients using seven CCR trajectories that lacked collisions; we used RayStation software (ver. 4.7) to this end. Subsequently, verification plans were generated. The mean absolute error (MAE) between the center of an MV-imaged steel ball and the radiation field was calculated using the Winston-Lutz test. The MAEs between planned and actual irradiation values were also calculated from trajectory logs. In addition, correlation coefficients (r values) among the MAEs of gantry angle, couch angle, and multi-leaf collimator (MLC) position, and mechanical parameters including gantry speed, couch speed, MLC speed, and beam output, were estimated. The dosimetric accuracies of planned and measured values were also assessed using ArcCHECK.ResultsThe MAEs ±2 standard deviations as revealed by the Winston-Lutz test for all trajectories were 0.3 ± 0.3 mm in two dimensions. The MAEs of the gantry, couch, and MLC positions calculated from all trajectory logs were within 0.04°, 0.08°, and 0.02 mm, respectively. Deviations in the couch angle (r = 0.98, p < 0.05) and MLC position (r = 0.86, p < 0.05) increased significantly with speed. The MAE of the beam output error was less than 0.01 MU. The mean gamma passing rate ± 2 SD (range) of the 3%/3 mm, 3%/1 mm, and 5%/1 mm was 98.1 ± 1.9% (95.7-99.6%), 87.2 ± 2.8% (80.2-96.7%), and 96.3 ± 2.8% (93.9-99.6%), respectively.ConclusionsCCR-VMAT delivered via the TrueBeam Developer Mode was associated with high-level geometric and mechanical accuracy, thus affording to high dosimetric accuracy. The CCR-VMAT performance was stable regardless of the trajectory chosen.

Project description:The purpose of this work is to evaluate the volumetric-modulated arc therapy (VMAT) multicriteria optimization (MCO) algorithm clinically available in the RayStation treatment planning system (TPS) and its ability to reduce treatment planning time while providing high dosimetric plan quality. Nine patients with localized prostate cancer who were previously treated with 78 Gy in 39 fractions using VMAT plans and rayArc system based on the direct machine parameter optimization (DMPO) algorithm were selected and replanned using the VMAT-MCO system. First, the dosimetric quality of the plans was evaluated using multiple conformity metrics that account for target coverage and sparing of healthy tissue, used in our departmental clinical protocols. The conformity and homogeneity index, number of monitor units, and treatment planning time for both modalities were assessed. Next, the effects of the technical plan parameters, such as constraint leaf motion CLM (cm/°) and maximum arc delivery time T (s), on the accuracy of delivered dose were evaluated using quality assurance passing rates (QAs) measured using the Delta4 phantom from ScandiDos. For the dosimetric plan's quality analysis, the results show that the VMAT-MCO system provides plans comparable to the rayArc system with no statistical difference for V95% (p < 0.01), D1% (p < 0.01), CI (p < 0.01), and HI (p < 0.01) of the PTV, bladder (p < 0.01), and rectum (p < 0.01) constraints, except for the femoral heads and healthy tissues, for which a dose reduction was observed using MCO compared with rayArc (p < 0.01). The technical parameter study showed that a combination of CLM equal to 0.5 cm/degree and a maximum delivery time of 72 s allowed the accurate delivery of the VMAT-MCO plan on the Elekta Versa HD linear accelerator. Planning evaluation and dosimetric measurements showed that VMAT-MCO can be used clinically with the advantage of enhanced planning process efficiency by reducing the treatment planning time without impairing dosimetric quality.

Dataset Information

Clinical experience with planning, quality assurance, and delivery of burst-mode modulated arc therapy.

Publications

Clinical experience with planning, quality assurance, and delivery of burst-mode modulated arc therapy.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets