Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Directly Probing Light Absorption Enhancement of Single Hierarchical Structures with Engineered Surface Roughness.

ABSTRACT: Hierarchical nanostructures are ideal architectures to harvest solar energy. The understanding of light absorption in single hierarchical structures is emergently important and greatly helpful in enhancing multiscale optical phenomena and light management. However, due to the geometrical complexity of hierarchical architectures, theoretical and experimental studies of light absorption have faced significant challenges. Here, we directly quantify light absorption in single hierarchical structures for the first time by utilizing VO2-based near field powermeter. It is found that light trapping is significantly enhanced in rough microwires when the roughness amplitude is comparable to the incident light wavelength. The roughness enhanced light absorption is verified as a general phenomenon on both VO2 and Si hierarchical structures. Therefore, our work not only provides a simple and quantitative method of measuring light absorption upon single geometrically complex structures in micro/nanoscale, but also contributes a general rule to rationally design of hierarchical structures for enhanced performance in photoelectric and photochemical applications.

SUBMITTER: Wang J

PROVIDER: S-EPMC6095879 | biostudies-other | 2018 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Light Absorption Enhancement of Silicon-Based Photovoltaic Devices with Multiple Bandgap Structures of Porous Silicon.

Project description:Porous-silicon (PS) multi-layered structures with three stacked PS layers of different porosity were prepared on silicon (Si) substrates by successively tuning the electrochemical-etching parameters in an anodization process. The three PS layers have different optical bandgap energy and construct a triple-layered PS (TLPS) structure with multiple bandgap energy. Photovoltaic devices were fabricated by depositing aluminum electrodes of Schottky contacts on the surfaces of the developed TLPS structures. The TLPS-based devices exhibit broadband photoresponses within the spectrum of the solar irradiation and get high photocurrent for the incident light of a tungsten lamp. The improved spectral responses of devices are owing to the multi-bandgap structures of TLPS, which are designed with a layered configuration analog to a tandem cell for absorbing a wider energy range of the incidental sun light. The large photocurrent is mainly ascribed to an enhanced light-absorption ability as a result of applying nanoporous-Si thin films as the surface layers to absorb the short-wavelength light and to improve the Schottky contacts of devices. Experimental results reveal that the multi-bandgap PS structures produced from electrochemical-etching of Si wafers are potentially promising for development of highly efficient Si-based solar cells.

| S-EPMC5512663 | biostudies-other

Understanding the origin of photoelectrode performance enhancement by probing surface kinetics.

Project description:Photoelectrochemical (PEC) water splitting holds the potential to meet the challenges associated with the intermittent nature of sunlight. Catalysts have often been shown to improve the performance of PEC water splitting, but their working mechanisms are not well understood. Using intensity modulated photocurrent spectroscopy (IMPS), we determined the rate constants of water oxidation and recombination at the surface of three different hematite-based photoanodes. It was found that the best performing electrodes, in terms of photocurrent onset potential, exhibited the slowest water oxidation rate constants, which was a surprise. The performance of these photoelectrodes was enabled by the slow surface recombination. When amorphous NiFeO x , a water oxidation catalyst, was present, the rate of surface hole transfer actually slowed down; what was slowed more was the recombination rate at the hematite surface, resulting in better water oxidation performance. As such, NiFeO x primarily serves as a passivation layer rather than a catalytic layer. Together a better understanding of the role of catalytic overlayers for water oxidation has been achieved.

| S-EPMC6006950 | biostudies-literature

Facile Synthesis of GNPs@NixSy@MoS2 Composites with Hierarchical Structures for Microwave Absorption.

Project description:Graphene-based powder absorbers have been used to attain excellent microwave absorption. However, it is not clear if inferior microwave absorption by pure graphene materials can be attributed to impedance mismatching or inadequate attenuation capability. In this comparative study, we focus on these aspects. Graphene nanoplatelets (GNPs) multi-component composites (GNPs@NixSy@MoS2) were prepared by hydrothermal reaction with different S and Mo molar ratios. The morphologies, phase crystals, elemental composition, and magnetic properties of the composites were also analyzed. In addition, microwave absorption of the as-prepared samples was investigated and it revealed that the impedance mismatching could be responsible for inferior microwave absorption; higher conductivity can lead to skin effect that inhibits the further incidence of microwaves into the absorbers. Furthermore, the optimum reflection loss (RL) of GNPs@NixSy@MoS2-2 can reach -43.3 dB at a thickness of 2.2 mm and the corresponding bandwidth with effective attenuation (RL < -10 dB) of up to 3.6 GHz (from 7.0 to 10.6 GHz). Compared with the GNPs, the enhanced microwave absorption can be assigned to the synergistic effects of conductive and dielectric losses.

| S-EPMC6835756 | biostudies-literature

Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures.

Project description:Additive manufacturing (AM) is a production method that enables the building of porous structures with a controlled geometry. However, there is a limited control over the final surface of the product. Hence, complementary surface engineering strategies are needed. In this work, design of experiments (DoE) was used to customize post AM surface treatment for 3D selective laser melted Ti6Al4V open porous structures for bone tissue engineering. A two-level three-factor full factorial design was employed to assess the individual and interactive effects of the surface treatment duration and the concentration of the chemical etching solution on the final surface roughness and beam thickness of the treated porous structures. It was observed that the concentration of the surface treatment solution was the most important factor influencing roughness reduction. The designed beam thickness decreased the effectiveness of the surface treatment. In this case study, the optimized processing conditions for AM production and the post-AM surface treatment were defined based on the DoE output and were validated experimentally. This allowed the production of customized 3D porous structures with controlled surface roughness and overall morphological properties, which can assist in more controlled evaluation of the effect of surface roughness on various functional properties.

| S-EPMC5452834 | biostudies-other

The role of biomass burning states in light absorption enhancement of carbonaceous aerosols.

Project description:Carbonaceous aerosols, which are emitted from biomass burning, significantly contribute to the Earth's radiation balance. Radiative forcing caused by biomass burning has been poorly qualified, which is largely attributed to uncertain absorption enhancement values (Eabs) of black carbon (BC) aerosols. Laboratory measurements and theoretical modelling indicate a significant value of Eabs; but this enhancement is observed to be negligible in the ambient environment, implying that models may overestimate global warming due to BC. Here, we present an aggregate model integrating BC aerosol ensembles with different morphologies and mixing states and report a quantitative analysis of the BC Eabs from different combustion states during biomass burning. We show that the BC Eabs produced by flaming combustion may be up to two times more than those produced by smouldering combustion, suggesting that the particle morphology and mixing state of freshly emitted BC aerosols is an important source of the contrasting values of Eabs. The particle morphology of freshly emitted BC aerosols is widely assumed to be bare in models, which is rare in the ambient environment and leads to small estimates of Eabs by field observations. We conclude that the exact description of freshly emitted carbonaceous aerosols plays an important role in constraining aerosol radiative forcing.

| S-EPMC7393073 | biostudies-literature

Enhancement of Piezoelectric Properties of Flexible Nanofibrous Membranes by Hierarchical Structures and Nanoparticles.

Project description:Piezoelectric nanogenerators (PENGs) show superiority in self-powered energy converters and wearable electronics. However, the low power output and ineffective transformation of mechanical energy into electric energy l limit the role of PENGs in energy conversion and storage devices, especially in fiber-based wearable electronics. Here, a PAN-PVDF/ZnO PENG with a hierarchical structure was designed through electrospinning and a hydrothermal reaction. Compared with other polymer nanofibers, the PAN-PVDF/ZnO nanocomposites not only showed two distinctive diameter distributions of uniform nanofibers, but also the complete coverage and embedment of ZnO nanorods, which brought about major improvements in both mechanical and piezoelectric properties. Additionally, a simple but effective method to integrate the inorganic nanoparticles into different polymers and regulate the hierarchical structure by altering the types of polymers, concentrations of spinning solutions, and growth conditions of nanoparticles is presented. Further, the designed P-PVDF/ZnO PENG was demonstrated as an energy generator to successfully power nine commercial LEDs. Thus, this approach reveals the critical role of hierarchical structures and processing technology in the development of high-performance piezoelectric nanomaterials.

| S-EPMC9609935 | biostudies-literature

Surface contrast enhancement of integumentary structures in X-ray tomography.

Project description:Micro-computed tomography (μCT) has become standard in the biological sciences to reconstruct, display and analyse 3D models of all kinds of organisms. However, it is often impossible to capture fine details of the surface and the internal anatomy at the same time with sufficient contrast. Here we introduce a new approach for the selective contrast-enhancement of integumentary surface structures. The method relies on conventional and readily available sputter coaters to cover the entire sample with a thin layer of gold atoms. This approach proved successful on a diverse array of plants and animals. On average, we achieved a 14.48-fold gain of surface contrast (ranging from 2.42-fold to 86.93-fold) compared with untreated specimens. Even X-ray-transparent samples such as spider silk became accessible via μCT. This selective contrast-enhancement, makes it possible to digitally reconstruct fine surface structures with low absorbance while the tissue-dependent grey value resolution of the inner anatomy is maintained and remains fully visualisable. The methodology is suited for a broad scientific application across biology and other sciences employing (μ)CT, as well as educative and public outreach purposes.

| S-EPMC6637458 | biostudies-literature

Replication of Leaf Surface Structures for Light Harvesting.

Project description:As one of the most important hosts of natural light harvesting, foliage normally has complicated surface structures to capture solar radiances. Bio-mimicking leaf surface structures can provide novel designs of covers in photovoltaic systems. In this article, we reported on replicating leaf surface structures on poly-(methyl methacrylate) polymers to prompt harvesting efficiencies. Prepared via a double transfer process, the polymers were found to have high optical transparencies and transmission hazes, with both values exceeding 80% in some species. Benefiting from optical properties and wrinkled surfaces, the biomimetic polymers brought up to 17% gains to photovoltaic efficiencies. Through Monte-Carlo simulations of light transport, ultrahigh haze values and low reflections were attributed to lightwave guidance schemes lead by the nano- and micro-morphologies which are inherited from master leaves. Thus, leaf surface bio-mimicking can be considered as a strategic direction to design covers of light harvesting systems.

| S-EPMC4585631 | biostudies-literature

Broadband light absorption enhancement in dye-sensitized solar cells with Au-Ag alloy popcorn nanoparticles.

Project description:In this paper, we present an investigation on the use of Au-Ag alloy popcorn-shaped nanoparticles (NPs) to realise the broadband optical absorption enhancement of dye-sensitized solar cells (DSCs). Both simulation and experimental results indicate that compared with regular plasmonic NPs, such as nano-spheres, irregular popcorn-shaped alloy NPs exhibit absorption enhancement over a broad wavelength range due to the excitation of localized surface plasmons (LSPs) at different wavelengths. The power conversion efficiency (PCE) of DSCs is enhanced by 16% from 5.26% to 6.09% by incorporating 2.38 wt% Au-Ag alloy popcorn NPs. Moreover, by adding a scattering layer on the exterior of the counter electrode, the popcorn NPs demonstrate an even stronger ability to increase the PCE by 32% from 5.94% to 7.85%, which results from the more efficient excitation of the LSP mode on the popcorn NPs.

| S-EPMC3698494 | biostudies-literature

Probing the Design Rationale of a High-Performing Faujasitic Zeotype Engineered to have Hierarchical Porosity and Moderated Acidity.

Project description:Porosity and acidity are influential properties in the rational design of solid-acid catalysts. Probing the physicochemical characteristics of an acidic zeotype framework at the molecular level can provide valuable insights in understanding intrinsic reaction pathways, for affording structure-activity relationships. Herein, we employ a variety of probe-based techniques (including positron annihilation lifetime spectroscopy (PALS), FTIR and solid-state NMR spectroscopy) to demonstrate how a hierarchical design strategy for a faujasitic (FAU) zeotype (synthesized for the first time, via a soft-templating approach, with high phase-purity) can be used to simultaneously modify the porosity and modulate the acidity for an industrially significant catalytic process (Beckmann rearrangement). Detailed characterization of hierarchically porous (HP) SAPO-37 reveals enhanced mass-transport characteristics and moderated acidity, which leads to superior catalytic performance and increased resistance to deactivation by coking, compared to its microporous counterpart, further vindicating the interplay between porosity and moderated acidity.

| S-EPMC7692934 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data