Dataset Information

Steam Sterilization of Equine Bone Block: Morphological and Collagen Analysis.

ABSTRACT: Introduction:The use of equine bone blocks is widely reported for bone augmentation techniques. The block must be shaped according to the form of the defect that should be regenerated. The shaping could be performed by hand before or during the surgery, in a sterile ambient, or using a CNC milling machine that could not be sterile. The aim of our study was to evaluate if a steam sterilization could provide a medical grade sterilization of the blocks and to evaluate if bone microstructure and collagen structures change after different steam sterilization protocols provided by mainstream autoclave. Materials and Method:Two blocks of equine bone were divided into 16 samples. 1 sample was used as control and not submitted to any treatment. 15 samples were infected with a Streptococcus faecalis bacterial culture. The samples were singularly packed, randomly divided into 3 groups, and submitted to autoclave sterilization on the same device. The groups were submitted to a sterilization cycle (Gr. A: 121°C, 1,16 bar for 20'; Gr. B:134°C, 2,16 bar for 4'; Gr. C: 134°C, 2,16 bar for 3.30 min.). 2 samples for each group were evaluated for the sterility. 3 samples for each group were observed at SEM to notice the macro- and microstructure modification and to confocal microscope to observe the collagen. Results:All samples were sterile. The SEM evaluation showed, in all groups, a preserved morphological structure. Confocal microscope evaluation shows that the collagen structure appears to be more uniform and preserved in group C. Conclusion:Data show that autoclave steam sterilization could be reliable to obtain sterilization of equine bone blocks.

SUBMITTER: Lo Giudice R

PROVIDER: S-EPMC6109994 | biostudies-other | 2018

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Steam Sterilization of Equine Bone Block: Morphological and Collagen Analysis.

Lo Giudice R R Rizzo G G Centofanti A A Favaloro A A Rizzo D D Cervino G G Squeri R R Costa B G BG La Fauci V V Lo Giudice G G

BioMed research international 20180813

<h4>Introduction</h4>The use of equine bone blocks is widely reported for bone augmentation techniques. The block must be shaped according to the form of the defect that should be regenerated. The shaping could be performed by hand before or during the surgery, in a sterile ambient, or using a CNC milling machine that could not be sterile. The aim of our study was to evaluate if a steam sterilization could provide a medical grade sterilization of the blocks and to evaluate if bone microstructure ...[more]

PMID: 30186873

Similar Datasets

Project description:BackgroundDifferent 3D-printed materials polyactic acid (PLA), polyamide (PA), polycarbonates (PC), acrylonitrile butadiene styrene (ABS) and GreenTEC Pro®I have been considered for surgical templates, but there is a sparity of data about how these materials are affected by steam sterilization. The aim of the current study was to test if and how these materials change morphologically when high temperature, pressure and humidity are applied during the steam sterilization process. The overall aim is to create patient-specific sawing templates for performing corrective osteotomies. After the designing process, test-specimens with five different materials: PLA, PC, ABS, PA and GreenTEC Pro® were 3D-printed in two filling grades (30 and 100%). The FDM method was used for printing. After 3D-printing, the test-specimens were steam sterilized with a standard program lasting 20 min, at a temperature of 121 °C and a pressure of 2-3 bar. In order to measure the deviation of the printed model, we measured the individual test-specimens before and after steam sterilization using a sliding gauge.ResultsPC, PA and ABS showed great morphological deviations from the template after 3D-printing and steam sterilization (> 1%) respectively. ABS proved unsuitable for steam sterilization. PLA and GreenTEC Pro® demonstrated fewer morphological deviations both before and after sterilization. Therefore, we decided to perform a second test just with PLA and Green-TEC Pro® to find out which material has the highest stability and is probably able to be used for clinical application. The smallest deviations were found with the GreenTEC Pro® solid body. After autoclaving, the specimens showed a deviation from the planned body and remained below the 1% limit.ConclusionSteam sterilization causes morphological deviations in 3D printed objects. GreenTEC Pro® seems to be a suitable material for clinical use, not only for intraoperative use, but also for precise modeling. Microbiological examination, as well as biomechanical tests, should be performed to further assess whether intraoperative use is possible.

Project description:Morphological study of the neuromuscular junction (NMJ), a specialised peripheral synapse formed between a lower motor neuron and skeletal muscle fibre, has significantly contributed to the understanding of synaptic biology and neuromuscular disease pathogenesis. Rodent NMJs are readily accessible, and research into conditions such as amyotrophic lateral sclerosis (ALS), Charcot-Marie-Tooth disease (CMT), and spinal muscular atrophy (SMA) has relied heavily on experimental work in these small mammals. However, given that nerve length dependency is an important feature of many peripheral neuropathies, these rodent models have clear shortcomings; large animal models might be preferable, but their size presents novel anatomical challenges. Overcoming these constraints to study the NMJ morphology of large mammalian distal limb muscles is of prime importance to increase cross-species translational neuromuscular research potential, particularly in the study of long motor units. In the past, NMJ phenotype analysis of large muscle bodies within the equine distal pelvic limb, such as the tibialis cranialis, or within muscles of high fibrous content, such as the soleus, has posed a distinct experimental hurdle. We optimised a technique for NMJ location and dissection from equine pelvic limb muscles. Using a quantification method validated in smaller species, we demonstrate their morphology and show that equine NMJs can be reliably dissected, stained and analysed. We reveal that the NMJs within the equine soleus have distinctly different morphologies when compared to the extensor digitorum longus and tibialis cranialis muscles. Overall, we demonstrate that equine distal pelvic limb muscles can be regionally dissected, with samples whole-mounted and their innervation patterns visualised. These methods will allow the localisation and analysis of neuromuscular junctions within the muscle bodies of large mammals to identify neuroanatomical and neuropathological features.

Dataset Information

Steam Sterilization of Equine Bone Block: Morphological and Collagen Analysis.

Publications

Steam Sterilization of Equine Bone Block: Morphological and Collagen Analysis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets