Dataset Information

A novel experimental setup for evaluating the stiffness of ankle foot orthoses.

ABSTRACT: The purpose of this study was the construction of a new semi-automated experimental setup for the evaluation of the stiffness of ankle foot orthoses (AFOs) around an axis aligned to the anatomical ankle joint during the second rocker of the gait. The setup, developed in close collaboration with the orthopedic device company V!GO NV (Wetteren, Belgium), allows measurement of plantarflexion and dorsiflexion in the sagittal plane for a maximal range of motion of 50° (-?25° plantarflexion up to 25° dorsiflexion) in a non-destructive way.The mechanical properties of four 3D printed AFOs are investigated, based on the ranges of motion derived from the gait assessment of the patients when they walked with their AFO. The reliability of the stiffness measures was studied by the evaluation of the test-retest repeatability and the intra-tester and inter-tester variability. These studies revealed that the ankle stiffness can be measured with high reliability (ICC?=?0.94-1.00). The obtained outcomes indicate that the experimental setup could be applied to measure the ankle stiffness of any topology of AFOs and, in the future, help finding the correlation with the information coming from the gait assessment of the patients.

SUBMITTER: Ielapi A

PROVIDER: S-EPMC6125880 | biostudies-other | 2018 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

A novel experimental setup for evaluating the stiffness of ankle foot orthoses.

Ielapi A A Vasiliauskaite E E Hendrickx M M Forward M M Lammens N N Van Paepegem W W Deckers J P JP Vermandel M M De Beule M M

BMC research notes 20180905 1

<h4>Objective</h4>The purpose of this study was the construction of a new semi-automated experimental setup for the evaluation of the stiffness of ankle foot orthoses (AFOs) around an axis aligned to the anatomical ankle joint during the second rocker of the gait. The setup, developed in close collaboration with the orthopedic device company V!GO NV (Wetteren, Belgium), allows measurement of plantarflexion and dorsiflexion in the sagittal plane for a maximal range of motion of 50° (- 25° plantar ...[more]

PMID: 30185209

Similar Datasets

Project description:BackgroundIn people with calf muscle weakness, the stiffness of dorsal leaf spring ankle-foot orthoses (DLS-AFO) needs to be individualized to maximize its effect on walking. Orthotic suppliers may recommend a certain stiffness based on body weight and activity level. However, it is unknown whether these recommendations are sufficient to yield the optimal stiffness for the individual. Therefore, we assessed whether the stiffness following the supplier's recommendation of the Carbon Ankle7 (CA7) dorsal leaf matched the experimentally optimized AFO stiffness.MethodsThirty-four persons with calf muscle weakness were included and provided a new DLS-AFO of which the stiffness could be varied by changing the CA7® (Ottobock, Duderstadt, Germany) dorsal leaf. For five different stiffness levels, including the supplier recommended stiffness, gait biomechanics, walking energy cost and speed were assessed. Based on these measures, the individual experimentally optimal AFO stiffness was selected.ResultsIn only 8 of 34 (23%) participants, the supplier recommended stiffness matched the experimentally optimized AFO stiffness, the latter being on average 1.2 ± 1.3 Nm/degree more flexible. The DLS-AFO with an experimentally optimized stiffness resulted in a significantly lower walking energy cost (- 0.21 ± 0.26 J/kg/m, p < 0.001) and a higher speed (+ 0.02 m/s, p = 0.003). Additionally, a larger ankle range of motion (+ 1.3 ± 0.3 degrees, p < 0.001) and higher ankle power (+ 0.16 ± 0.04 W/kg, p < 0.001) were found with the experimentally optimized stiffness compared to the supplier recommended stiffness.ConclusionsIn people with calf muscle weakness, current supplier's recommendations for the CA7 stiffness level result in the provision of DLS-AFOs that are too stiff and only achieve 80% of the reduction in energy cost achieved with an individual optimized stiffness. It is recommended to experimentally optimize the CA7 stiffness in people with calf muscle weakness in order to maximize treatment outcomes. Trial registration Nederlands Trial Register 5170. Registration date: May 7th 2015. http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=5170 .

Project description:Background:Ankle-foot orthoses (AFO) are prescribed to manage difficulty walking due to foot drop, bony foot deformities and poor balance. Traditional AFOs are handmade using thermoplastic vacuum forming which provides limited design options, is labour-intensive and associated with long wait times. 3D printing has the potential to transform AFO production and health service delivery. The aim of this systematic review was to determine the feasibility of designing, manufacturing and delivering customised 3D printed AFOs by evaluating the biomechanical outcomes, mechanical properties and fit of 3D printed compared to traditionally manufactured AFOs. Method:Electronic databases were searched from January 1985 to June 2018 according to terms related to 3D printing and AFOs. Studies of any design from healthy or pathological populations of any age were eligible for inclusion. Studies must have investigated the effect of customised 3D printed AFOs using any 3D printing technique on outcomes related to walking ability, biomechanical function, mechanical properties, patient comfort, pain and disability. Any other orthotic type or AFOs without a 3D printed calf and foot section were excluded. The quality of evidence was assessed using the GRADE process. Results:Eleven studies met the eligibility criteria evaluating 3D printed AFOs in healthy adults, and adults and children with unilateral foot drop from a variety of conditions. 3D printing was used to replicate traditional AFOs and develop novel designs to optimise the stiffness properties or reduce the weight and improve the ease of use of the AFO. 3D printed custom AFOs were found to be comparable to traditional custom AFOs and prefabricated AFOs in terms of temporal-spatial parameters. The mechanical stiffness and energy dissipation of 3D printed AFOs were found to be similar to prefabricated carbon-fibre AFOs. However, the sample sizes were small (n?=?1 to 8) and study quality was generally low. Conclusion:The biomechanical effects and mechanical properties of 3D printed AFOs were comparable to traditionally manufactured AFOs. Developing novel AFO designs using 3D printing has many potential benefits including stiffness and weight optimisation to improve biomechanical function and comfort.

Dataset Information

A novel experimental setup for evaluating the stiffness of ankle foot orthoses.

Publications

A novel experimental setup for evaluating the stiffness of ankle foot orthoses.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets