Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Microscale heat transfer and thermal extinction of a wire-grid polarizer.

ABSTRACT: We explore heat transfer and thermal characteristics of a wire-grid polarizer (WGP) on a microscale by investigating the effect of various geometrical parameters such as wire-grid period, height, and a fill factor. The thermal properties arise from heat transfer by light absorption and conduction in wire-grids. Fill factor was found to be the most dominant geometrical parameter. For TM polarized light, a higher fill factor with thicker wire-grids increased the temperature. The local temperature was found to rise up to Tmax?=?354.5?K. TE polarization tended to produce lower temperature. Thermal extinction due to polarimetric extinction by a WGP was also evaluated and highest extinction was observed to be 4.78?dB, which represents a temperature difference ?T?=?54.3?°C. We expect the results to be useful for WGPs in polarization-sensitive thermal switching applications.

SUBMITTER: Im S

PROVIDER: S-EPMC6175867 | biostudies-other | 2018 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Microscale heat transfer and thermal extinction of a wire-grid polarizer.

Im Seongmin S Sim Eunji E Kim Donghyun D

Scientific reports 20181008 1

We explore heat transfer and thermal characteristics of a wire-grid polarizer (WGP) on a microscale by investigating the effect of various geometrical parameters such as wire-grid period, height, and a fill factor. The thermal properties arise from heat transfer by light absorption and conduction in wire-grids. Fill factor was found to be the most dominant geometrical parameter. For TM polarized light, a higher fill factor with thicker wire-grids increased the temperature. The local temperature ...[more]

PMID: 30297826

Similar Datasets

Heat transfer control using a thermal analogue of coherent perfect absorption.

Project description:Recent investigations on non-Hermitian physics have unlocked new possibilities to manipulate wave scattering on lossy materials. Coherent perfect absorption is such an effect that enables all-light control by incorporating a suitable amount of loss. On the other hand, controlling heat transfer with heat may empower a distinct paradigm other than using thermal metamaterials. However, since heat neither propagates nor carries any momentum, almost all concepts in wave scattering are ill-defined for steady-state heat diffusion, making it formidable to understand or utilize any coherent effect. Here, we establish a scattering theory for heat diffusion by introducing an imitated momentum for thermal fields. The thermal analogue of coherent perfect absorption is thus predicted and demonstrated as the perfect absorption of exergy fluxes and undisturbed temperature fields. Unlike its photonic counterpart, thermal coherent perfect absorption can be realized for regular thermal materials, and be generalized for various objects.

| S-EPMC9106689 | biostudies-literature

Thermal Anemometry Grid Sensor.

Project description:A novel thermal anemometry grid sensor was developed for the simultaneous measurement of cross-sectional temperature and axial velocity distribution in a fluid flow. The sensor consists of a set of platinum resistors arranged in a regular grid. Each platinum resistor allows the simultaneous measurement of fluid temperature via electrical resistance and flow velocity via constant voltage thermal anemometry. Cross-sectional measurement was enabled by applying a special multiplexing-excitation scheme. In this paper, we present the design and characterization of a prototypical sensor for measurements in a range of very low velocities.

| S-EPMC5539716 | biostudies-other

Nanogap Engineering for Enhanced Transmission of Wire Grid Polarizers in Mid-Wavelength Infrared Region.

Project description:Wire-grid polarizers (WGPs) have been widely used in various fields, such as polarimetry, imaging, display, spectroscopy, and optical isolation. However, conventional WGPs used in diverse mid-wavelength infrared (MWIR) applications show high reflection losses, which intrinsically arise from high refractive indices of their IR-transmitting substrates, such as silicon (Si) and germanium (Ge). This study demonstrated the enhanced transmittance of a transverse magnetic (TM) wave that surpassed ~80% over the entire MWIR range from 3000 to 5000 nm in a narrow air gap of a WGP, where aluminum (Al) was selectively deposited on a nanopatterned Si substrate using an oblique angle deposition method. Moreover, a higher TM wave transmittance was achieved by reducing the air gaps of the WGPs in the nanopatterns, which were distinctly different from the traditional WGPs comprising metal wires patterned directly on a flat substrate. A finite-difference time-domain simulation was performed to investigate optical properties of the proposed WGPs, which showed that the electric field in the air nanogap was remarkably enhanced. The characteristic performances were further investigated using a combination of an effective medium approximation and an admittance diagram, revealing that the broadband transmission enhancement could be attributed to a combined effect of a strong electric field and a better admittance matching. The approach and results described in this paper hold promise for the design and the fabrication of high-quality WGPs, as well as their numerous applications.

| S-EPMC6414691 | biostudies-literature

Experimental data for the characterization of heat transfer processes in a cement based thermal energy storage system with helical heat exchanger.

Project description:This document compiles the detailed experimental data and description of four different heat charging tests presented in Nordbeck et al. ([1]), which aimed at the basic performance characterization of a lab-scale prototype of a new scalable, cement based, sensible heat storage system. The data set contains transient distributed measurements of temperatures within the storage as well as measurements of the experimental boundary conditions (heat carrier fluid flow rates, charging and laboratory temperatures) at high temporal resolution. In addition, the geometrical configuration of the storage and its component parts as well as the associated thermal material parameters are specified. The presented data is useful to assess and compare storage characteristics (storage capacities, charging/discharging rates, energy efficiency, heat loss behaviour) of the new heat storage system. The data can also be used as a reference data set for the development and verification of numerical models of modular solid-liquid heat storages or other related geothermal systems such as ground source heat pumps or energy piles using helical heat exchangers.

| S-EPMC6861595 | biostudies-literature

High-Thermal-Conductivity and High-Fluidity Heat Transfer Emulsion with 89 wt % Suspended Liquid Metal Microdroplets.

Project description:Colloidal suspensions of thermally conductive particles in a carrier fluid are considered promising heat transfer fluids for various thermal energy transfer applications, such as transportation, plants, electronics, and renewable energy systems. The thermal conductivity (k) of the particle-suspended fluids can be improved substantially by increasing the concentration of conductive particles above a "thermal percolation threshold," which is limited because of the vitrification of the resulting fluid at the high particle loadings. In this study, eutectic Ga-In liquid metal (LM) was employed as a soft high-k filler dispersed as microdroplets at high loadings in paraffin oil (as a carrier fluid) to produce an emulsion-type heat transfer fluid with the combined advantages of high thermal conductivity and high fluidity. Two types of the LM-in-oil emulsions, which were produced via the probe-sonication and rotor-stator homogenization (RSH) methods, demonstrated significant improvements in k, i.e., Δk ∼409 and ∼261%, respectively, at the maximum investigated LM loading of 50 vol % (∼89 wt %), attributed to the enhanced heat transport via high-k LM fillers above the percolation threshold. Despite the high filler loading, the RSH-produced emulsion retained remarkably high fluidity, with a relatively low viscosity increase and no yield stress, demonstrating its potential as a circulatable heat transfer fluid.

| S-EPMC10210168 | biostudies-literature

Fluoride binding to an organoboron wire controls photoinduced electron transfer.

Project description:We demonstrate that the rates for long-range electron transfer can be controlled actively by tight anion binding to a rigid rod-like molecular bridge. Electron transfer from a triarylamine donor to a photoexcited Ru(bpy)32+ acceptor (bpy = 2,2'-bipyridine) across a 2,5-diboryl-1,4-phenylene bridge occurs within less than 10 ns in CH2Cl2 at 22 °C. Fluoride anions bind with high affinity to the organoboron bridge due to strong Lewis base/Lewis acid interactions, and this alters the electronic structure of the bridge drastically. Consequently, a large tunneling barrier is imposed on photoinduced electron transfer from the triarylamine to the Ru(bpy)32+ complex and hence this process occurs more than two orders of magnitude more slowly, despite the fact that its driving force is essentially unaffected by fluoride addition. Electron transfer rates in proteins could potentially be regulated via a similar fundamental principle, because interactions between charged amino acid side chains and counter-ions can modulate electronic couplings between distant redox partners. In artificial donor-bridge-acceptor compounds, external stimuli have been employed frequently to control electron transfer rates, but the approach of exploiting strong Lewis acid/Lewis base interactions to regulate the tunneling barrier height imposed by a rigid rod-like molecular bridge is conceptually novel and broadly applicable, because it is largely independent of the donor and the acceptor, and because the effect is not based on a change of the driving-force for electron transfer. The principle demonstrated here can potentially be used to switch between conducting and insulating states of molecular wires between electrodes.

| S-EPMC5659175 | biostudies-literature

Thermal windows and heat exchange.

Project description: Not available

| S-EPMC4843926 | biostudies-literature

The Concept of Making On-Chip Thermal Cycler for RT-PCR Using Conjugate Heat Transfer in Diverging Microchannel

Project description:Covid-19 is pandemic to which the world is fighting. Various precautionary measures are being imposed all over the world which is affecting the routine life of an individual and also the economy worldwide. Although, a definite vaccine is still not known to medical science but they are able to distinguish Covid-19 from the other types of flu. Presently this is being done by detecting the SARS-CoV-2 virus using RT-PCR technique as recommended by the World Health Organization (WHO) (WHO, Geneva, 2020). Reverse Transcription Polymerase Chain Reaction (RT-PCR) is a nucleic acid amplification test that converts the RNA into DNA and subsequently amplifies the specific DNA targets. This method was already being employed to detect the severe acute respiratory syndrome-associated coronavirus (SARS-CoV) (Emery et al. in Emerg Infect Dis 10(2):311, 2004). The entire process of DNA amplification takes place in three steps: denaturation, annealing, and extension for which the sample is required to be maintained at constant temperatures of 95, 55 and 72 °C, respectively. This article introduces the technology to achieve a constant temperature which can be tweaked to develop on-chip RT-PCR.

| S-EPMC7247283 | biostudies-literature

Ultrafast radiative heat transfer.

Project description:Light absorption in conducting materials produces heating of their conduction electrons, followed by relaxation into phonons within picoseconds, and subsequent diffusion into the surrounding media over longer timescales. This conventional picture of optical heating is supplemented by radiative cooling, which typically takes place at an even lower pace, only becoming relevant for structures held in vacuum or under extreme thermal isolation. Here, we reveal an ultrafast radiative cooling regime between neighboring plasmon-supporting graphene nanostructures in which noncontact heat transfer becomes a dominant channel. We predict that more than 50% of the electronic heat energy deposited on a graphene disk can be transferred to a neighboring nanoisland within a femtosecond timescale. This phenomenon is facilitated by the combination of low electronic heat capacity and large plasmonic field concentration in doped graphene. Similar effects should occur in other van der Waals materials, thus opening an unexplored avenue toward efficient heat management.Electron relaxation, which is the dominant release channel of electronic heat in nanostructures, occurs with characteristic times of several picoseconds. Here, the authors predict that an ultrafast (femtosecond) radiative cooling regime takes place in plasmonically active neighboring graphene nanodisks prior to electron relaxation.

| S-EPMC5431947 | biostudies-literature

Transfer-printed, tandem microscale light-emitting diodes for full-color displays.

Project description:Inorganic semiconductor-based microscale light-emitting diodes (micro-LEDs) have been widely considered the key solution to next-generation, ubiquitous lighting and display systems, with their efficiency, brightness, contrast, stability, and dynamic response superior to liquid crystal or organic-based counterparts. However, the reduction of micro-LED sizes leads to the deteriorated device performance and increased difficulties in manufacturing. Here, we report a tandem device scheme based on stacked red, green, and blue (RGB) micro-LEDs, for the realization of full-color lighting and displays. Thin-film micro-LEDs (size ∼100 μm, thickness ∼5 μm) based on III-V compound semiconductors are vertically assembled via epitaxial liftoff and transfer printing. A thin-film dielectric-based optical filter serves as a wavelength-selective interface for performance enhancement. Furthermore, we prototype arrays of tandem RGB micro-LEDs and demonstrate display capabilities. These materials and device strategies provide a viable path to advanced lighting and display systems.

| S-EPMC8106345 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data