Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Use of a Water Soluble Flexible Substrate to Embed Electronics in Additively Manufactured Objects: From Tattoo to Water Transfer Printed Electronics.

ABSTRACT: The integration of electronics into the process flow of the additive manufacturing of 3D objects is demonstrated using water soluble films as a temporary flexible substrate. Three process variants are detailed to evaluate their capabilities to meet the additive manufacturing requirements. One of them, called water transfer printing, shows the best ability to fabricate electronics onto 3D additively manufactured objects. Moreover, a curved capacitive touchpad hidden by color films is successfully transferred onto the 3D objects, showing a potential application of this technology to fabricate fully additively manufactured discrete or even hidden electronic devices.

SUBMITTER: Le Borgne B

PROVIDER: S-EPMC6187858 | biostudies-other | 2018 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

The Use of a Water Soluble Flexible Substrate to Embed Electronics in Additively Manufactured Objects: From Tattoo to Water Transfer Printed Electronics.

Le Borgne Brice B Jacques Emmanuel E Harnois Maxime M

Micromachines 20180917 9

The integration of electronics into the process flow of the additive manufacturing of 3D objects is demonstrated using water soluble films as a temporary flexible substrate. Three process variants are detailed to evaluate their capabilities to meet the additive manufacturing requirements. One of them, called water transfer printing, shows the best ability to fabricate electronics onto 3D additively manufactured objects. Moreover, a curved capacitive touchpad hidden by color films is successfully ...[more]

PMID: 30424407

Similar Datasets

Additively Manufactured Flexible Electronics with Ultrabroad Range and High Sensitivity for Multiple Physiological Signals' Detection.

Project description:Flexible electronics can be seamlessly attached to human skin and used for various purposes, such as pulse monitoring, pressure measurement, tensile sensing, and motion detection. Despite their broad applications, most flexible electronics do not possess both high sensitivity and wide detection range simultaneously; their sensitivity drops rapidly when they are subjected to even just medium pressure. In this study, ultrabroad-range, high-sensitivity flexible electronics are fabricated through additive manufacturing to address this issue. The key to possess high sensitivity and a wide detection range simultaneously is to fabricate flexible electronics with large depth-width ratio circuit channels using the additive manufacturing inner-rinsing template method. These electronics exhibit an unprecedented high sensitivity of 320 kPa-1 over the whole detection range, which ranges from 0.3 to 30,000 Pa (five orders of magnitude). Their minimum detectable weight is 0.02 g (the weight of a fly), which is comparable with human skin. They can stretch to over 500% strain without breaking and show no tensile fatigue after 1000 repetitions of stretching to 100% strain. A highly sensitive and flexible electronic epidermal pulse monitor is fabricated to detect multiple physiological signals, such as pulse signal, breathing rhythm, and real-time beat-to-beat cuffless blood pressure. All of these signals can be obtained simultaneously for detailed health detection and monitoring. The fabrication method does not involve complex expensive equipment or complicated operational processes, so it is especially suitable for the fabrication of large-area, complex flexible electronics. We believe this approach will pave the way for the application of flexible electronics in biomedical detection and health monitoring.

| S-EPMC9394051 | biostudies-literature

Screen printed passive components for flexible power electronics.

Project description:Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components-inductors, capacitors, and resistors-perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application.

| S-EPMC4626765 | biostudies-literature

Investigation into the Microstructure and Hardness of Additively Manufactured (3D-Printed) Inconel 718 Alloy.

Project description:Additive manufacturing (AM) of Ni-based super alloys is more challenging, compared to the production other metallic alloys. This is due to their high melting point and excellent high temperature resistance. In the present work, an Inconel 718 alloy was fabricated by a powder laser bed fusion (P-LBF) process and investigated to assess its microstructural evolution, together with mechanical properties. Additionally, the alloy was compared against the cast (and forged) alloy of similar composition. The microstructure of the P-LBF-processed alloy shows hierarchy microstructure that consists of cellular sub-structure (~100-600 nm), together with melt pool and grain boundaries, in contrast of the twin infested larger grain microstructure of the cast alloy. However, the effect of such unique microstructure on mechanical properties of the L-PBF alloy was overwritten, due to the absence of precipitates. The hardness of the L-PBF-processed alloy (330-349 MPa) was lower than that of cast alloy (408 MPa). The similar trend was also observed in other mechanical properties, such as Young's modulus, resistance to plasticity and shear stress.

| S-EPMC10051848 | biostudies-literature

Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics.

Project description:Gravure printing is a promising technique for large-scale printed electronics. However, gravure printing of silver nanowires (AgNWs) so far has been limited in terms of resolution and electrical conductivity. In this study, gravure printing of water-based AgNW ink on a flexible substrate is demonstrated. By tailoring the ink properties, printing conditions and post-printing treatment, gravure printing enables printing of high-resolution, highly conductive AgNW patterns in large areas, with resolution as fine as 50 µm and conductivity as high as 5.34 × 104 S cm-1. The printed AgNW patterns on the flexible substrate show excellent flexibility under repeated bending. All these characteristics demonstrate the excellent potential of gravure printing of AgNWs for developing large-area flexible electronics.

| S-EPMC6181915 | biostudies-literature

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics.

Project description:Sensor data can be wirelessly transmitted from simple, battery-less tags using Radio Frequency Identification (RFID). RFID sensor tags consist of an antenna, a radio frequency integrated circuit chip (RFIC), and at least one sensor. An ideal tag can communicate over a long distance and be seamlessly integrated onto everyday objects. However, miniaturized antenna designs often have lower performance. Here we demonstrate compact, flexible sensor tags with read range comparable to that of conventional rigid tags. We compare fabrication techniques for flexible antennas and demonstrate that screen and stencil printing are both suitable for fabricating antennas; these different techniques are most useful at different points in the design cycle. We characterize two versions of flexible, screen printed folded dipoles and a meandered monopole operating in the 915 MHz band. Finally, we use these antennas to create passive sensor tags and demonstrate over the air communication of sensor data. These tags could be used to form a network of printed, flexible, passive, interactive sensor tags.

| S-EPMC7538943 | biostudies-literature

Multilayer Substrate to Use Brittle Materials in Flexible Electronics.

Project description:Flexible materials with sufficient mechanical endurance under bending or folding is essential for flexible electronic devices. Conventional rigid materials such as metals and ceramics are mostly brittle so that their properties can deteriorate under a certain amount of strain. In order to utilize high-performance, but brittle conventional materials in flexible electronics, we propose a novel flexible substrate structure with a low-modulus interlayer. The low-modulus interlayer reduces the surface strain, where active electronic components are placed. The bending results with indium tin oxide (ITO) show that a critical bending radius, where the conductivity starts to deteriorate, can be reduced by more than 80% by utilizing the low-modulus layer. We demonstrate that even rigid electrodes can be used in flexible devices by manipulating the structure of flexible substrate.

| S-EPMC7203148 | biostudies-literature

Patient-specific brain arteries molded as a flexible phantom model using 3D printed water-soluble resin.

Project description:Visualizing medical images from patients as physical 3D models (phantom models) have many roles in the medical field, from education to preclinical preparation and clinical research. However, current phantom models are generally generic, expensive, and time-consuming to fabricate. Thus, there is a need for a cost- and time-efficient pipeline from medical imaging to patient-specific phantom models. In this work, we present a method for creating complex 3D sacrificial molds using an off-the-shelf water-soluble resin and a low-cost desktop 3D printer. This enables us to recreate parts of the cerebral arterial tree as a full-scale phantom model ([Formula: see text] cm) in transparent silicone rubber (polydimethylsiloxane, PDMS) from computed tomography angiography images (CTA). We analyzed the model with magnetic resonance imaging (MRI) and compared it with the patient data. The results show good agreement and smooth surfaces for the arteries. We also evaluate our method by looking at its capability to reproduce 1 mm channels and sharp corners. We found that round shapes are well reproduced, whereas sharp features show some divergence. Our method can fabricate a patient-specific phantom model with less than 2 h of total labor time and at a low fabrication cost.

| S-EPMC9205921 | biostudies-literature

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics.

Project description:Recently developed classes of electronics for biomedical applications exploit substrates that offer low elastic modulus and high stretchability, to allow intimate, mechanically biocompatible integration with soft biological tissues. A challenge is that such substrates do not generally offer protection of the electronics from high peak strains that can occur upon large-scale deformation, thereby creating a potential for device failure. The results presented here establish a simple route to compliant substrates with strain-limiting mechanics based on approaches that complement those of recently described alternatives. Here, a thin film or mesh of a high modulus material transferred onto a prestrained compliant substrate transforms into wrinkled geometry upon release of the prestrain. The structure formed by this process offers a low elastic modulus at small strain due to the small effective stiffness of the wrinkled film or mesh; it has a high tangent modulus (e.g., >1000 times the elastic modulus) at large strain, as the wrinkles disappear and the film/mesh returns to a flat geometry. This bilinear stress-strain behavior has an extremely sharp transition point, defined by the magnitude of the prestrain. A theoretical model yields analytical expressions for the elastic and tangent moduli and the transition strain of the bilinear stress-strain relation, with quantitative correspondence to finite element analysis and experiments.

| S-EPMC5639729 | biostudies-literature

The Hardness of Additively Manufactured Alloys.

Project description:The rapidly evolving field of additive manufacturing requires a periodic assessment of the progress made in understanding the properties of metallic components. Although extensive research has been undertaken by many investigators, the data on properties such as hardness from individual publications are often fragmented. When these published data are critically reviewed, several important insights that cannot be obtained from individual papers become apparent. We examine the role of cooling rate, microstructure, alloy composition and post process heat treatment on the hardness of additively manufactured aluminum, nickel, titanium and iron base components. Hardness data for steels and aluminum alloys processed by additive manufacturing and welding are compared to understand the relative roles of manufacturing processes. Furthermore, the findings are useful to determine if a target hardness is easily attainable either by adjusting AM process variables or through appropriate alloy selection.

| S-EPMC6266262 | biostudies-other

Microscale residual stresses in additively manufactured stainless steel.

Project description:Additively manufactured (AM) metallic materials commonly possess substantial microscale internal stresses that manifest as intergranular and intragranular residual stresses. However, the impact of these residual stresses on the mechanical behaviour of AM materials remains unexplored. Here we combine in situ synchrotron X-ray diffraction experiments and computational modelling to quantify the lattice strains in different families of grains with specific orientations and associated intergranular residual stresses in an AM 316L stainless steel under uniaxial tension. We measure pronounced tension-compression asymmetries in yield strength and work hardening for as-printed stainless steel, and show they are associated with back stresses originating from heterogeneous dislocation distributions and resultant intragranular residual stresses. We further report that heat treatment relieves microscale residual stresses, thereby reducing the tension-compression asymmetries and altering work-hardening behaviour. This work establishes the mechanistic connections between the microscale residual stresses and mechanical behaviour of AM stainless steel.

| S-EPMC6761200 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data