Rapid Mercury(II) Removal by Electrospun Sulfur Copolymers.
Ontology highlight
ABSTRACT:
SUBMITTER: Thielke MW
PROVIDER: S-EPMC6432393 | biostudies-other | 2016 Jul
REPOSITORIES: biostudies-other
Publications
Rapid Mercury(II) Removal by Electrospun Sulfur Copolymers.
Thielke Michael W MW Bultema Lindsey A LA Brauer Daniel D DD Richter Bernadette B Fischer Markus M Theato Patrick P
Polymers 20160720 7
Electrospinning was performed with a blend of commercially available poly(methyl methacrylate) (PMMA) and a sulfur-rich copolymer based on poly(sulfur-<i>statistical</i>-diisopropenylbenzene), which was synthesized via inverse vulcanization. The polysulfide backbone of sulfur-containing polymers is known to bind mercury from aqueous solutions and can be utilized for recycling water. Increasing the surface area by electrospinning can maximize the effect of binding mercury regarding the rate and m ...[more]
Similar Datasets
Project description:This paper reports the carbon quantum dots-doped magnetic electrospinning nanofibers for the self-display and removal of Hg(II) ions from water. The fluorescent carbon quantum dots and magnetic Fe3O4 nanoparticles were pre-prepared successfully, and they appeared to be homogeneously dispersed in nanofibers via electrospinning. During the sorption of Hg(II) ions, the significant fluorescence signals of nanofibers gradually declined and exhibited a good linear relationship with cumulative adsorption capacity, which could be easily recorded by the photoluminescence spectra. The sorption performance of mercury ions onto the nanofibers was investigated in terms of different experimental factors including contact time, solution pH value, and initial ion concentration. Considering the actual parameters, the nanofibers were sensitive self-display adsorption system for Hg(II) ions in the existence of other cation. The sorption data were described by different kinetic models, which indicate that the whole sorption was controlled by chemical adsorption. The intraparticle diffusion mass transfer was not obvious in this system, which further proved the uniform adsorption and even fluorescence quenching in nanofibers. Additionally, the nanocomposite fiber could regenerate in several cycles with no significant loss of adsorption capacity and fluorescence intensity. Thus, the nanofibers are promising alternatives for environmental pollution incidents. It is especially competent due to its high efficiency for self-display and removal of high concentration of mercury ions.
| S-EPMC6641464 | biostudies-literature
Project description:Highly efficient removal of Hg(ii) has been previously achieved through the adsorption by functionalized covalent organic frameworks (COFs). Among these COFs, thioether groups need to be deliberately introduced into the pores of COFs through either a bottom-up synthesis or post-synthesis strategy. Herein, we report a simple mercury removal strategy that used a stable alkynyl (-C[triple bond, length as m-dash]C-) based covalent organic framework (TP-EDDA COF) as an adsorbent for Hg(ii) removal. Sulfur vapor was first adsorbed by the TP-EDDA COF due to the van der Waals interaction between adsorbed sulfur and alkynyl groups. The Hg(ii) removal capability was then evaluated for the sulfur loaded TP-EDDA COF. Our results exhibited a good Hg(ii) removal performance for the sulfur loaded TP-EDDA COF. It was deduced that s⋯π interaction between sulfur atom and the alkynyl groups of the COF skeleton caused an increase in the electron density of sulfur and the electronegative sulfur atoms acted as a soft acid to accept soft-basic Hg(ii). This strategy provides a convenient platform for COFs to cope with environmental issues.
| S-EPMC9742859 | biostudies-literature
Project description:Contamination of the environment by mercury(II) ions (Hg(2+)) poses a serious threat to human health and ecosystems. Up to now, many reported Hg(2+) sensors require complex procedures, long measurement times and sophisticated instrumentation. We have developed a simple, rapid, low cost and naked-eye quantitative method for Hg(2+) environmental analysis using a paper-based colorimetric device (PCD). The sample solution to which platinum nanoparticles (PtNPs) have been added is dispensed to the detection zone on the PCD, where the 3,3,5,5-tetramethylbenzidine (TMB) substrate has been pre-loaded. The PtNPs effect a rapid oxidization of TMB, inducing blue colorization on the PCD. However, Hg(2+) in the solution rapidly interact with the PtNPs, suppressing the oxidation capacity and hence causing a decrease in blue intensity, which can be observed directly by the naked eye. Moreover, Hg(2+) at concentrations as low as 0.01 uM, can be successfully monitored using a fiber optic device, which gives a digital readout proportional to the intensity of the blue color change. This paper-based colorimetric device (PCD) shows great potential for field measurement of Hg(2+).
| S-EPMC4995402 | biostudies-literature
Project description:Various materials have been developed for environmental remediation of mercury ion pollution. Among these materials, covalent organic frameworks (COFs) can efficiently adsorb Hg(II) from water. Herein, two thiol-modified COFs (COF-S-SH and COF-OH-SH) were prepared, through the reaction between 2,5-divinylterephthalaldehyde and 1,3,5-tris-(4-aminophenyl)benzene, followed by post-synthetic modification using bis(2-mercaptoethyl) sulfide and dithiothreitol, respectively. The modified COFs showed excellent Hg(II) adsorption abilities with maximum adsorption capacities of 586.3 and 535.5 mg g−1 for COF-S-SH and COF-OH-SH, respectively. The prepared materials showed excellent selective absorbability for Hg(II) against multiple cationic metals in water. Unexpectedly, the experimental data showed that both co-existing toxic anionic diclofenac sodium (DCF) and Hg(II) performed positive effect for capturing another pollutant by these two modified COFs. Thus, a synergistic adsorption mechanism between Hg(II) and DCF on COFs was proposed. Moreover, density functional theory calculations revealed that synergistic adsorption occurred between Hg(II) and DCF, which resulted in a significant reduction in the adsorption system's energy. This work highlights a new direction for application of COFs to simultaneous removal of heavy metals and co-existing organic pollutants from water. Graphical abstract Image 1 Highlights • Thiol covalent organic frameworks (COFs) were successfully synthesized.• Thiol COFs showed remarkable selectivity for Hg(II) capture.• Synergistic adsorption occurred between Hg(II) and diclofenac sodium (DCF).• Thiol COFs had stable reuse ability for Hg(II) removal.
| S-EPMC9923162 | biostudies-literature
Project description:Heavy metal pollution, such as lead, can cause contamination of water resources and harm human life. Many techniques have been explored and utilized to overcome this problem, with adsorption technology being the most common strategies for water treatment. In this study, carbon nanofibers, polyacrylonitrile (PAN)/sago lignin (SL) carbon nanofibers (PAN/SL CNF) and PAN/SL activated carbon nanofibers (PAN/SL ACNF), with a diameter approximately 300 nm, were produced by electrospinning blends of polyacrylonitrile and sago lignin followed by thermal and acid treatments and used as adsorbents for the removal of Pb(II) ions from aqueous solutions. The incorporation of biodegradable and renewable SL in PAN/SL blends fibers produces the CNF with a smaller diameter than PAN only but preserves the structure of CNF. The adsorption of Pb(II) ions on PAN/SL ACNF was three times higher than that of PAN/SL CNF. The enhanced removal was due to the nitric acid treatment that resulted in the formation of surface oxygenated functional groups that promoted the Pb(II) ions adsorption. The best-suited adsorption conditions that gave the highest percentage removal of 67%, with an adsorption capacity of 524 mg/g, were 40 mg of adsorbent dosage, 125 ppm of Pb(II) solution, pH 5, and a contact time of 240 min. The adsorption data fitted the Langmuir isotherm and the pseudo-second-order kinetic models, indicating that the adsorption is a monolayer, and is governed by the availability of the adsorption sites. With the adsorption capacity of 588 mg/g, determined via the Langmuir isotherm model, the study demonstrated the potential of PAN/SL ACNFs as the adsorbent for the removal of Pb(II) ions from aqueous solution.
| S-EPMC7411989 | biostudies-literature
Project description:In this study, the synthesis of SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %) has been investigated under acidic conditions by using P123 as a template via the direct method. The nanocomposites of SBA-15 were synthesized by the same method and by the addition of silver salt. Finally, the nanocomposite materials were examined for the removal of mercury ions from wastewater as an adsorbent by the reverse titration method. Characterization was carried out through x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption-desorption (Brunauer-Emmett-Teller). XRD spectra confirmed the presence of silver nanoparticles within the amorphous silica matrix of SBA-15. The Barrett-Joyner-Halenda analysis showed that SBA-15 and SBA-15/Ag have a narrow pore size distribution. SEM images demonstrated that the morphology of the matrix of SBA-15 is in spherical state. Furthermore, wavelength dispersive x-ray spectroscopy identified the presence and distribution of silver nanoparticles inside the pore channels and outside of them. Typical TEM images of SBA-15 and SBA-15/Ag (5 wt.%) indicated a regular hexagonal pore structure with long-range order and long channels. In SBA-15/Ag (5 wt.%) sample, the nanoparticles of silver was found into the pores and outside of them. The removal of mercury ions from wastewater using mesoporous silica nanocomposite containing silver nanoparticles was studied by the reverse titration analysis. The best capacity of adsorption of mercury ions from wastewater was obtained for SBA-15/Ag (5 wt.%) sample, which was equal to 42.26 mg/g in 20 min at pH of 7. The Freundlich model was used to explain the adsorption characteristics for the heterogeneous surface, and [Formula: see text] (adsorption capacity) and n (adsorption intensity) were determined for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %). The value of R2 was about 0.99, 0.99, 0.98, and 0.98 and Kf was about 42, 48, 58, and 58 mg/g for SBA-15/Ag, SBA-15/Ag (2.5 %), SBA-15/Ag (5 %), and SBA-15/Ag (10 %), respectively. Furthermore, the values of n >1 show a favorable adsorption process for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials. Moreover, the Langmuir isotherm model evaluation showed that the correlation coefficients for all concentrations were R2 >0.99, indicating that Hg (II) ions were adsorbed on the surface of SBA-15/Ag via chemical and physical interaction. Additionally, the analytic hierarchy process (AHP) and Technique of Order Preference Similarity to the Ideal Solution (TOPSIS) methods that depend on the criteria of the surface area, amount of adsorbent, pore volume, and cost of synthesis were used. The evaluation of results showed that the best sample was SBA-15/Ag (5 wt.%). Furthermore, the research work highlighted the antibacterial nanocomposite with suitable adsorption of Hg (II) ions from water solutions and supported its potential for environmental applications. This nanocomposite can be used in the absorption domain of Hg (II) ions from water solutions.
| S-EPMC5026648 | biostudies-other
Project description:This study demonstrates a three-step process consisting of primary pre-filtration followed by ultrafiltration (UF) and adsorption with thiol-functionalized microfiltration membranes (thiol membranes) to effectively remove mercury sulfide nanoparticles (HgS NPs) and dissolved mercury (Hg2+) from wastewater. Thiol membranes were synthesized by incorporating either cysteine (Cys) or cysteamine (CysM) precursors onto polyacrylic acid (PAA)-functionalized polyvinylidene fluoride membranes. Carbodiimide chemistry was used to cross-link thiol (-SH) groups on membranes for metal adsorption. The thiol membranes and intermediates of the synthesis were tested for permeability and long-term mercury removal using synthetic waters and industrial wastewater spiked with HgS NPs and a Hg2+ salt. Results show that treatment of the spiked wastewater with a UF membrane removed HgS NPs to below the method detection level (<2 ppb) for up to 12.5 h of operation. Flux reductions that occurred during the experiment were reversible by washing with water, suggesting negligible permanent fouling. Dissolved Hg2+ species were removed to non-detection levels by passing the UF-treated wastewater through a CysM thiol membrane. The adsorption efficiency in this long-term study (>20 h) was approximately 97%. Addition of Ca2+ cations reduced the adsorption efficiencies to 82% for the CysM membrane and to 40% for the Cys membrane. The inferior performance of Cys membranes may be explained by the presence of a carboxyl (-COOH) functional group in Cys, which may interfere in the adsorption process in the presence of multiple cations because of multication absorption. CysM membranes may therefore be more effective for treatment of wastewater than Cys membranes. Focused ion beam characterization of a CysM membrane cross section demonstrates that the adsorption of heavy metals is not limited to the membrane surface but takes place across the entire pore length. Experimental results for adsorptions of selected heavy metals on thiol membranes over a wide range of operating conditions could be predicted with modeling. These results show promising potential industrial applications of thiol-functionalized membranes.
| S-EPMC7482228 | biostudies-literature
Project description:To improve the adsorption capacity, reduce the disposal cost, and enhance the separation efficiency of common activated carbon as an adsorbent in wastewater treatment, a novel thiol-modified magnetic activated carbon adsorbent of NiFe2O4-PAC-SH was successfully synthesized with a facile and safe hydrothermal method without any toxic and harmful reaction media. The as-prepared NiFe2O4-PAC-SH can effectively remove mercury(II) ions from aqueous solution. The maximal adsorption capacities from the experiment and Langmuir fitting achieve 298.8 and 366.3 mg/g at pH 7, respectively, exceeding most of adsorptive materials. The as-prepared NiFe2O4-PAC-SH has an outstanding regeneration performance, remarkable hydrothermal stability, and efficient separation efficiency. The data of kinetics, isotherms, and thermodynamics show that the adsorption of mercury(II) ions is spontaneous and exothermic. Ion exchange and electrostatic attraction are the main adsorption factors. The experimental results exhibit that the NiFe2O4-PAC-SH can be a prominent substitute for conventional activated carbon as an adsorbent.
| S-EPMC6648564 | biostudies-literature
Project description:Industrial pollution by heavy metal ions such as Hg2+ and Ag⁺ is a universal problem owing to the toxicity of heavy metals. In this study, a novel nano-adsorbent, i.e., poly-2-mercapto-1,3,4-thiadiazole (PTT), was synthesized and used to selectively adsorb mercury and silver ions from aqueous solutions. PTT nanoparticles were synthesized via chemical oxidative dehydrogenation polymerization under mild conditions. Oxidant species, medium, monomer concentration, oxidant/monomer molar ratio, and polymerization temperature were optimized to obtain optimum yields. The molecular structure and morphology of the nanoparticles were analyzed by ultraviolet-visible (UV-Vis), Fourier transform infrared (FT-IR), matrix-assisted laser desorption/ionization/time-of-flight (MALDI/TOF) mass and X-ray photoelectron (XPS) spectroscopies, wide-angle X-ray diffraction (WAXD), theoretical calculations and transmission electron microscopy (TEM), respectively. It was found that the polymerization of 2-mercapto-1,3,4-thiodiazole occurs through head-to-tail coupling between the S(2) and C(5) positions. The PTT nanoparticles having a peculiar synergic combination of four kinds of active groups, S⁻, ⁻SH, N⁻N, and =N⁻ with a small particle size of 30⁻200 nm exhibit ultrarapid initial adsorption rates of 1500 mg(Hg)·g-1·h-1 and 5364 mg(Ag)·g-1·h-1 and high adsorption capacities of up to 186.9 mg(Hg)·g-1 and 193.1 mg(Ag)·g-1, becoming ultrafast chelate nanosorbents with high adsorption capacities. Kinetic study indicates that the adsorption of Hg2+ and Ag⁺ follows the pseudo-second-order model, suggesting a chemical adsorption as the rate-limiting step during the adsorption process. The Hg2+ and Ag⁺-loaded PTT nanoparticles could be effectively regenerated with 0.1 mol·L-1 EDTA or 1 mol·L-1 HNO₃ without significantly losing their adsorption capacities even after five adsorption⁻desorption cycles. With these impressive properties, PTT nanoparticles are very promising materials in the fields of water-treatment and precious metals recovery.
| S-EPMC6415195 | biostudies-literature
Project description:The susceptibility of two-coordinate mercury alkyl compounds of the type X-Hg-R (where X is a monodentate sulfur donor) towards protolytic cleavage has been investigated as part of ongoing efforts to obtain information relevant to understanding the mechanism of action of the organomercurial lyase, MerB. Specifically, the reactivity of the two-coordinate mercury alkyl compounds PhSHgR, [mim(Bu(t))]HgR and {[Hmim(Bu(t))]HgR}(+) (Hmim(Bu(t)) = 2-mercapto-1-t-butylimidazole; R = Me, Et) towards PhSH was investigated, thereby demonstrating that the ability to cleave the Hg-C bond is very dependent on the nature of the system. For example, whereas the reaction of PhSHgMe with PhSH requires heating at 145 degrees C for several weeks to liberate CH(4), the analogous reaction of PhSHgEt with PhSH leads to evolution of C(2)H(6) over the course of 2 days at 100 degrees C. Furthermore, protolytic cleavage of the Hg-C bond by PhSH is promoted by Hmim(Bu(t)). For example, whereas the reaction of {[Hmim(Bu(t))]HgEt}(+) with PhSH eliminates C(2)H(6) at elevated temperatures, the protolytic cleavage occurs over a period of 2 days at room temperature in the presence of Hmim(Bu(t)). The ability of Hmim(Bu(t)) to promote the protolytic cleavage is interpreted in terms of the formation of a higher coordinate species {[Hmim(Bu(t))](n)HgR}(+) that is more susceptible to Hg-C bond cleavage than is two-coordinate {[Hmim(Bu(t))]HgR}(+). These observations support the notion that access to a species with a coordination number greater than two is essential for efficient activity of MerB.
| S-EPMC2879077 | biostudies-other