Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Melting of CaSiO3 Perovskite at High Pressure.

ABSTRACT: Ab initio molecular dynamics simulations predict that CaSiO3 perovskite melts at 5600 K at 136 GPa, and 6400 K at 300 GPa, significantly higher than MgSiO3 perovskite. The entropy of melting (1.8 kB per atom) is much larger than that of many silicates at ambient pressure and of simple liquids and varies little with pressure. The volume of melting decreases rapidly with increasing pressure, to 3 % at 136 GPa, producing a melting slope that diminishes rapidly with pressure. We determine the melting temperature via the ZW method, combining the Z method, for which we clarify the theoretical basis, with a waiting time analysis. The ZW method results are internally confirmed by integrating the Clausius-Clapeyron equation, which also yields our results for the entropy and volume of melting. We find the eutectic composition on the MgSiO3-CaSiO3 join to be x Ca = 0.26 at 136 GPa and that metasilicate melt is denser than coexisting silicates.

SUBMITTER: Braithwaite J

PROVIDER: S-EPMC6446823 | biostudies-other | 2019 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Melting of CaSiO3 Perovskite at High Pressure.

Braithwaite James J Stixrude Lars L

Geophysical research letters 20190221 4

Ab initio molecular dynamics simulations predict that CaSiO3 perovskite melts at 5600 K at 136 GPa, and 6400 K at 300 GPa, significantly higher than MgSiO3 perovskite. The entropy of melting (1.8 kB per atom) is much larger than that of many silicates at ambient pressure and of simple liquids and varies little with pressure. The volume of melting decreases rapidly with increasing pressure, to 3 % at 136 GPa, producing a melting slope that diminishes rapidly with ...[more]

PMID: 30983646

Similar Datasets

Anomalous perovskite PbRuO3 stabilized under high pressure.

Project description:Perovskite oxides ABO3 are important materials used as components in electronic devices. The highly compact crystal structure consists of a framework of corner-shared BO6 octahedra enclosing the A-site cations. Because of these structural features, forming a strong bond between A and B cations is highly unlikely and has not been reported in the literature. Here we report a pressure-induced first-order transition in PbRuO3 from a common orthorhombic phase (Pbnm) to an orthorhombic phase (Pbn21) at 32 GPa by using synchrotron X-ray diffraction. This transition has been further verified with resistivity measurements and Raman spectra under high pressure. In contrast to most well-studied perovskites under high pressure, the Pbn21 phase of PbRuO3 stabilized at high pressure is a polar perovskite. More interestingly, the Pbn21 phase has the most distorted octahedra and a shortest Pb-Ru bond length relative to the average Pb-Ru bond length that has ever been reported in a perovskite structure. We have also simulated the behavior of the PbRuO3 perovskite under high pressure by first principles calculations. The calculated critical pressure for the phase transition and evolution of lattice parameters under pressure match the experimental results quantitatively. Our calculations also reveal that the hybridization between a Ru:t2g orbital and an sp hybrid on Pb increases dramatically in the Pbnm phase under pressure. This pressure-induced change destabilizes the Pbnm phase to give a phase transition to the Pbn21 phase where electrons in the overlapping orbitals form bonding and antibonding states along the shortest Ru-Pb direction at P > Pc.

| S-EPMC3864321 | biostudies-literature

Melting temperatures of MgO under high pressure by micro-texture analysis.

Project description:Periclase (MgO) is the second most abundant mineral after bridgmanite in the Earth's lower mantle, and its melting behaviour under pressure is important to constrain rheological properties and melting behaviours of the lower mantle materials. Significant discrepancies exist between the melting temperatures of MgO determined by laser-heated diamond anvil cell (LHDAC) and those based on dynamic compressions and theoretical predictions. Here we show the melting temperatures in earlier LHDAC experiments are underestimated due to misjudgment of melting, based on micro-texture observations of the quenched samples. The high melting temperatures of MgO suggest that the subducted cold slabs should have higher viscosities than previously thought, suggesting that the inter-connecting textural feature of MgO would not play important roles for the slab stagnation in the lower mantle. The present results also predict that the ultra-deep magmas produced in the lower mantle are peridotitic, which are stabilized near the core-mantle boundary.

| S-EPMC5465366 | biostudies-literature

No evidence for high-pressure melting of Earth's crust in the Archean.

Project description:Much of the present-day volume of Earth's continental crust had formed by the end of the Archean Eon, 2.5 billion years ago, through the conversion of basaltic (mafic) crust into sodic granite of tonalite, trondhjemite and granodiorite (TTG) composition. Distinctive chemical signatures in a small proportion of these rocks, the so-called high-pressure TTG, are interpreted to indicate partial melting of hydrated crust at pressures above 1.5 GPa (>50 km depth), pressures typically not reached in post-Archean continental crust. These interpretations significantly influence views on early crustal evolution and the onset of plate tectonics. Here we show that high-pressure TTG did not form through melting of crust, but through fractionation of melts derived from metasomatically enriched lithospheric mantle. Although the remaining, and dominant, group of Archean TTG did form through melting of hydrated mafic crust, there is no evidence that this occurred at depths significantly greater than the ~40 km average thickness of modern continental crust.

| S-EPMC6895241 | biostudies-literature

Crystal structure of SrGeO3 in the high-pressure perovskite-type phase.

Project description:Single crystals of the SrGeO3 (strontium germanium trioxide) high-pressure phase have been synthesized successfully at 6?GPa and 1223?K. The compound crystallizes with the ideal cubic perovskite-type structure (space group Pm-3m), which consists of a network of corner-linked regular GeO6 octa-hedra (point-group symmetry m-3m), with the larger Sr atoms located at the centers of cavities in the form of SrO12 cubocta-hedra (point-group symmetry m-3m) in the network. The degrees of covalencies included in the Sr-O and the Ge-O bonds calculated from bond valences are 20.4 and 48.9%, respectively. Thus, the Ge-O bond of the GeO6 octa-hedron in the SrGeO3 perovskite has a strong covalency, comparable to those of the Si-O bonds of the SiO4 tetra-hedra in silicates with about 50% covalency. The thermal vibrations of the O atoms in the title compound are remarkably suppressed in the directions of the Ge-O bonds. This anisotropy ranks among the largest observed in stoichiometric cubic perovskites.

| S-EPMC4420111 | biostudies-literature

Ab initio molecular dynamics study of high-pressure melting of beryllium oxide.

Project description:We investigate, through first-principles molecular dynamics simulations, the high-pressure melting of BeO in the range 0 ≤ p ≤ 100 GPa. The wurtzite (WZ), zinc blend (ZB), and rocksalt (RS) phases of BeO are considered. It is shown that below 40 GPa, the melting temperature for the WZ phase is higher than that for the ZB and RS phases. When the pressure is beyond 66 GPa, the melting temperature for the RS phase is the highest one, in consistent with the previously reported phase diagram calculated within the quasiharmonic approximation. We find that in the medium pressure range between 40 to 66 GPa, the ZB melting data are very close to those of RS, which results from the fact that the ZB structure first transforms to RS phase before melting. The ZB-RS-liquid phase transitions have been observed directly during the molecular dynamics runs and confirmed using the pair correlation functions analysis. In addition, we propose the melting curve of BeO in the form Tm = 2696.05 (1 + P/24.67)(0.42), the zero-pressure value of 2696.05 K falling into the experimental data range of 2693 ~ 2853 K.

| S-EPMC3998012 | biostudies-other

Pressure-Induced Melting of Confined Ice.

Project description:The classic regelation experiment of Thomson in the 1850s deals with cutting an ice cube, followed by refreezing. The cutting was attributed to pressure-induced melting but has been challenged continuously, and only lately consensus emerged by understanding that compression shortens the O:H nonbond and lengthens the H-O bond simultaneously. This H-O elongation leads to energy loss and lowers the melting point. The hot debate survived well over 150 years, mainly due to a poorly defined heat exchange with the environment in the experiment. In our current experiment, we achieved thermal isolation from the environment and studied the fully reversible ice-liquid water transition for water confined between graphene and muscovite mica. We observe a transition from two-dimensional (2D) ice into a quasi-liquid phase by applying a pressure exerted by an atomic force microscopy tip. At room temperature, the critical pressure amounts to about 6 GPa. The transition is completely reversible: refreezing occurs when the applied pressure is lifted. The critical pressure to melt the 2D ice decreases with temperature, and we measured the phase coexistence line between 293 and 333 K. From a Clausius-Clapeyron analysis, we determine the latent heat of fusion of two-dimensional ice at 0.15 eV/molecule, being twice as large as that of bulk ice.

| S-EPMC5746843 | biostudies-literature

Pressure-Assisted Fabrication of Perovskite Solar Cells.

Project description:This paper presents the results of a combined experimental and analytical/computational study of the effects of pressure on photoconversion efficiencies of perovskite solar cells (PSCs). First, an analytical model is used to predict the effects of pressure on interfacial contact in the multilayered structures of PSCs. The PSCs are then fabricated before applying a range of pressures to the devices to improve their interfacial surface contacts. The results show that the photoconversion efficiencies of PSCs increase by ~40%, for applied pressures between 0 and ~7?MPa. However, the photoconversion efficiencies decrease with increasing pressure beyond ~7?MPa. The implications of the results are discussed for the fabrication of efficient PSCs.

| S-EPMC7188881 | biostudies-literature

Preferred oriented cation configurations in high pressure phases IV and V of methylammonium lead iodide perovskite.

Project description:A microscopic viewpoint of structure and dipolar configurations in hybrid organic-inorganic perovskites is crucial to understanding their stability and phase transitions. The necessity of incorporating dispersion interactions in the state-of-the-art density functional theory for the [Formula: see text] perovskite (MAPI) is demonstrated in this work. Some of the vdW methods were selected to evaluate the corresponding energetics properties of the cubic MAPI with various azimuthally rotated MA organic cation orientations. The highest energy barrier obtained from PBEsol reaches 18.6 meV/MA-ion, which is equivalent to 216 K, the temperature above which the MA cations randomly reorient. Energy profiles calculated by vdW incorporated functionals, on the other hand, exhibit various distinct patterns. The well-developed vdW-DF-cx functional was selected, thanks to its competence, to evaluate the total energies of different MA dipolar configurations in [Formula: see text] cubic supercell of MAPI under pressures. The centrosymmetric arrangement of the MA cations that provide zero total dipole moment configuration results in the lowest energy state profiles under pressure, while the non-centrosymmetric scheme displays a unique behaviour. Despite being overall unpolarised, the latter calculated with PBEsol leads to a rigid shift of energy from the profile obtained from the dispersive vdW-DF-cx functional. It is noteworthy that the energy profile responsible for the maximum polarised configuration nevertheless takes the second place in total energy under pressure.

| S-EPMC7713306 | biostudies-literature

Self-trapped exciton emission and piezochromism in conventional 3D lead bromide perovskite nanocrystals under high pressure.

Project description:Developing single-component materials with bright-white emission is required for energy-saving applications. Self-trapped exciton (STE) emission is regarded as a robust way to generate intrinsic white light in halide perovskites. However, STE emission usually occurs in low-dimensional perovskites whereby a lower level of structural connectivity reduces the conductivity. Enabling conventional three-dimensional (3D) perovskites to produce STEs to elicit competitive white emission is challenging. Here, we first achieved STEs-related emission of white light with outstanding chromaticity coordinates of (0.330, 0.325) in typical 3D perovskites, Mn-doped CsPbBr3 nanocrystals (NCs), through pressure processing. Remarkable piezochromism from red to blue was also realized in compressed Mn-doped CsPbBr3 NCs. Doping engineering by size-mismatched Mn dopants could give rise to the formation of localized carriers. Hence, high pressure could further induce octahedra distortion to accommodate the STEs, which has never occurred in pure 3D perovskites. Our study not only offers deep insights into the photophysical nature of perovskites, it also provides a promising strategy towards high-quality, stable white-light emission.

| S-EPMC8597834 | biostudies-literature

Local structural distortion and electrical transport properties of Bi(Ni1/2Ti1/2)O3 perovskite under high pressure.

Project description:Perovskite-structure materials generally exhibit local structural distortions that are distinct from long-range, average crystal structure. The characterization of such distortion is critical to understanding the structural and physical properties of materials. In this work, we combined Pair Distribution Function (PDF) technique with Raman spectroscopy and electrical resistivity measurement to study Bi(Ni1/2Ti1/2)O3 perovskite under high pressure. PDF analysis reveals strong local structural distortion at ambient conditions. As pressure increases, the local structure distortions are substantially suppressed and eventually vanish around 4 GPa, leading to concurrent changes in the electronic band structure and anomalies in the electrical resistivity. Consistent with PDF analysis, Raman spectroscopy data suggest that the local structure changes to a higher ordered state at pressures above 4 GPa.

| S-EPMC4680889 | biostudies-other