Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polymer Grafted Aluminum Nanoparticles for Percolative Composite Films with Enhanced Compatibility.

ABSTRACT: Aluminum nanoparticles hold promise for highly energetic materials and sustainable surface plasmonic materials. Most of the commercial Al nanoparticles are prepared via a high-throughput electrical explosion of wires method (up to 200 g h-1). However, the use of Al nanoparticles produced by an electrical explosion of wires is limited by their micrometer-sized aggregations and poor stability. Here, we use polystyrene with ⁻COOH end-group to graft onto isolated Al nanoparticles and dramatically enhance their colloidal stability in various organic solvents. We further demonstrate that the polystyrene grafted Al nanoparticles can be doped into polystyrene films with high compatibility, leading to enhanced dielectric properties, such as higher dielectric constant, lower dielectric loss, and stronger breakdown strength. Moreover, the composite film can improve the moisture resistance of embedded Al nanoparticles.

SUBMITTER: Yang C

PROVIDER: S-EPMC6523902 | biostudies-other | 2019 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Polymer Grafted Aluminum Nanoparticles for Percolative Composite Films with Enhanced Compatibility.

Yang Chenggong C Marian Chufarov C Liu Jie J Di Qi Q Xu Mingze M Zhang Yunhe Y Han Wei W Liu Kun K

Polymers 20190408 4

Aluminum nanoparticles hold promise for highly energetic materials and sustainable surface plasmonic materials. Most of the commercial Al nanoparticles are prepared via a high-throughput electrical explosion of wires method (up to 200 g h<sup>-1</sup>). However, the use of Al nanoparticles produced by an electrical explosion of wires is limited by their micrometer-sized aggregations and poor stability. Here, we use polystyrene with ⁻COOH end-group to graft onto isolated Al nanoparticles and dram ...[more]

PMID: 30965676

Similar Datasets

Enhanced resistance to decay of imprinted nanopatterns in thin films by bare nanoparticles compared to polymer-grafted nanoparticles.

Project description:We extend a previous study on the influence of nanoparticles on the decay of nanoimprinted polymer film patterns to compare the effects of "bare" silica (SiO2) nanoparticles and SiO2 nanoparticles with grafted polymer layers having the same chemical composition as the polymer matrix. This method involves nanoimprinting substrate-supported polymer films using a pattern replicated from a digital versatile disc (DVD), and then annealing the patterned polymer nanocomposite films at elevated temperatures to follow the decay of the topographic surface pattern with time by atomic force microscopy imaging after quenching. We quantified the relaxation of the pattern height ("slumping") and determined the relaxation time τ for this pattern decay process as a function of nanoparticle filler type and concentration to determine how nanoparticle additives influence relative film stability. Attractive interactions between the bare nanoparticles and the polymer matrix significantly enhance the thermal resilience of the nanopatterns to decay, compared to those of the particle brushes, wherein the particle core interactions are screened from the matrix via the brush layer. A novel aspect of this method is that it readily lends itself to in situ film relaxation measurements in a manufacturing context. We observe that the relaxation time of the pattern relaxation exhibits entropy-enthalpy compensation in the free energy parameters governing the pattern relaxation process as a function of temperature, irrespective of the NP system used, consistent with our previous experimental and computational studies.

| S-EPMC9419356 | biostudies-literature

Enhanced Electrochemical Performance of PEO-Based Composite Polymer Electrolyte with Single-Ion Conducting Polymer Grafted SiO<sub>2</sub> Nanoparticles.

Project description:In order to enhance the electrochemical performance and mechanical properties of poly(ethylene oxide) (PEO)-based solid polymer electrolytes, composite solid electrolytes (CSE) composed of single-ion conducting polymer-modified SiO2, PEO and lithium salt were prepared and used in lithium-ion batteries in this work. The pyridyl disulfide terminated polymer (py-ss-PLiSSPSI) is synthesized through RAFT polymerization, then grafted onto SiO2 via thiol-disulfide exchange reaction between SiO2-SH and py-ss-PLiSSPSI. The chemical structure, surface morphology and elemental distribution of the as-prepared polymer and the PLiSSPSI-g-SiO2 nanoparticles have been investigated. Moreover, CSEs containing 2, 6, and 10 wt% PLiSSPSI-g-SiO2 nanoparticles (PLi-g-SiCSEs) are fabricated and characterized. The compatibility of the PLiSSPSI-g-SiO2 nanoparticles and the PEO can be effectively improved owing to the excellent dispersibility of the functionalized nanoparticles in the polymer matrix, which promotes the comprehensive performances of PLi-g-SiCSEs. The PLi-g-SiCSE-6 exhibits the highest ionic conductivity (0.22 mS·cm-1) at 60 °C, a large tLi+ of 0.77, a wider electrochemical window of 5.6 V and a rather good lithium plating/stripping performance at 60 °C, as well as superior mechanical properties. Hence, the CSEs containing single-ion conducting polymer modified nanoparticles are promising candidates for all-solid-state lithium-ion batteries.

| S-EPMC9866075 | biostudies-literature

Tuning the Relaxation of Nanopatterned Polymer Films with Polymer-Grafted Nanoparticles: Observation of Entropy-Enthalpy Compensation.

Project description:Polymer films provide a versatile platform in which complex functional relief patterns can be thermally imprinted with a resolution down to few nanometers. However, a practical limitation of this method is the tendency for the imprinted patterns to relax ("slump"), leading to loss of pattern fidelity over time. While increasing temperature above glass transition temperature ( Tg) accelerates the slumping kinetics of neat films, we find that the addition of polymer-grafted nanoparticles (PGNP) can greatly enhance the thermal stability of these patterns. Specifically, increasing the concentration of poly(methyl methacrylate) (PMMA) grafted titanium dioxide (TiO2) nanoparticles in the composite films slows down film relaxation dynamics, leading to enhanced pattern stability for the temperature range that we investigated. Interestingly, slumping relaxation time is found to obey an entropy-enthalpy compensation (EEC) relationship with varying PGNP concentration, similar to recently observed relaxation of strain-induced wrinkling in glassy polymer films having variable film thickness. The compensation temperature, Tcomp was found to be in the vicintity of the bulk Tg of PMMA. Our results suggest a common origin of EEC relaxation in patterned polymer thin films and nanocomposites.

| S-EPMC6537094 | biostudies-literature

Entropy-driven segregation of polymer-grafted nanoparticles under confinement.

Project description:The modification of nanoparticles with polymer ligands has emerged as a versatile approach to control the interactions and organization of nanoparticles in polymer nanocomposite materials. Besides their technological significance, polymer-grafted nanoparticle (PGNP) dispersions have attracted interest as model systems to understand the role of entropy as a driving force for microstructure formation. For instance, densely and sparsely grafted nanoparticles show distinct dispersion and assembly behaviors within polymer matrices due to the entropy variation associated with conformational changes in brush and matrix chains. Here we demonstrate how this entropy change can be harnessed to drive PGNPs into spatially organized domain structures on submicrometer scale within topographically patterned thin films. This selective segregation of PGNPs is induced by the conformational entropy penalty arising from local perturbations of grafted and matrix chains under confinement. The efficiency of this particle segregation process within patterned mesa-trench films can be tuned by changing the relative entropic confinement effects on grafted and matrix chains. The versatility of topographic patterning, combined with the compatibility with a wide range of nanoparticle and polymeric materials, renders SCPINS (soft-confinement pattern-induced nanoparticle segregation) an attractive method for fabricating nanostructured hybrid films with potential applications in nanomaterial-based technologies.

| S-EPMC5347555 | biostudies-literature

Silver Nanoparticles Loaded on Polyethylene Terephthalate Films Grafted with Chitosan

Project description:Currently, polyethylene terephthalate (PET) is one of the most widely used polymeric materials in different sectors such as medicine, engineering, and food, among others, due to its benefits, including biocompatibility, mechanical resistance, and tolerance to chemicals and/or abrasion. However, despite all these excellent characteristics, it is not capable of preventing the proliferation of microorganisms on its surface. Therefore, providing this property to PET remains a difficult challenge. Fortunately, different strategies can be applied to remove microorganisms from the PET surface. In this work, the surface of the PET film was functionalized with amino groups and later with a dicarboxylic acid, allowing a grafting reaction with chitosan chains. Finally, the chitosan coating was loaded with silver nanoparticles with an average size of 130 ± 37 nm, presenting these materials with an average cell viability of 80%. The characterization of these new PET-based materials showed considerable changes in surface morphology as well as increased surface hydrophilicity without significantly affecting their mechanical properties. In general, the implemented method can open an alternative pathway to design new PET-based materials due to its good cell viability with possible bacteriostatic activity due to the biocidal properties of silver nanoparticles and chitosan.

| S-EPMC9824822 | biostudies-literature

Functional Films from Silica/Polymer Nanoparticles.

Project description:High performance functional coatings, based on hybrid organic/inorganic materials, are being developed to combine the polymer flexibility and ease of processing with the mechanical properties and versatility of inorganic materials. By incorporating silica nanoparticles (SiNPs) in the polymeric matrices, it is possible to obtain hybrid polymer films with increased tensile strength and impact resistance, without decreasing the flexural properties of the polymer matrix. The SiNPs can further be used as carriers to impart other functionalities (optical, etc.) to the hybrid films. By using polymer-coated SiNPs, it is possible to reduce particle aggregation in the films and, thus, achieve more homogeneous distributions of the inorganic components and, therefore, better properties. On the other hand, by coating polymer particles with silica, one can create hierarchically structured materials, for example to obtain superhydrophobic coatings. In this review, we will cover the latest developments in films prepared from hybrid polymer/silica functional systems.

| S-EPMC5453198 | biostudies-other

Polymer Brush-Grafted Nanoparticles Preferentially Interact with Opsonins and Albumin.

Project description:Nanoparticles find increasing applications in life science and biomedicine. The fate of nanoparticles in a biological system is determined by their protein corona, as remodeling of their surface properties through protein adsorption triggers specific recognition such as cell uptake and immune system clearance and nonspecific processes such as aggregation and precipitation. The corona is a result of nanoparticle-protein and protein-protein interactions and is influenced by particle design. The state-of-the-art design of biomedical nanoparticles is the core-shell structure exemplified by superparamagnetic iron oxide nanoparticles (SPIONs) grafted with dense, well-hydrated polymer shells used for biomedical magnetic imaging and therapy. Densely grafted polymer chains form a polymer brush, yielding a highly repulsive barrier to the formation of a protein corona via nonspecific particle-protein interactions. However, recent studies showed that the abundant blood serum protein albumin interacts with dense polymer brush-grafted SPIONs. Herein, we use isothermal titration calorimetry to characterize the nonspecific interactions between human serum albumin, human serum immunoglobulin G, human transferrin, and hen egg lysozyme with monodisperse poly(2-alkyl-2-oxazoline)-grafted SPIONs with different grafting densities and core sizes. These particles show similar protein interactions despite their different "stealth" capabilities in cell culture. The SPIONs resist attractive interactions with lysozymes and transferrins, but they both show a significant exothermic enthalpic and low exothermic entropic interaction with low stoichiometry for albumin and immunoglobulin G. Our results highlight that protein size, flexibility, and charge are important to predict protein corona formation on polymer brush-stabilized nanoparticles.

| S-EPMC7818653 | biostudies-literature

Internal Microstructure Dictates Interactions of Polymer-grafted Nanoparticles in Solution.

Project description:Understanding the effects of polymer brush architecture on particle interactions in solution is requisite to enable the development of functional materials based on self-assembled polymer-grafted nanoparticles (GNPs). Static and dynamic light scattering of polystyrene-grafted silica particle solutions in toluene reveals that the pair interaction potential, inferred from the second virial coefficient, A 2, is strongly affected by the grafting density, σ, and degree of polymerization, N, of tethered chains. In the limit of intermediate σ (∼0.3 to 0.6 nm-2) and high N, A 2 is positive and increases with N. This confirms the good solvent conditions and can be qualitatively rationalized on the basis of a pair interaction potential derived for grafted (brush) particles. In contrast, for high σ > 0.6 nm-2 and low N, A 2 displays an unexpected reversal to negative values, thus indicating poor solvent conditions. These findings are rationalized by means of a simple analysis based on a coarse-grained brush potential, which balances the attractive core-core interactions and the excluded volume interactions imparted by the polymer grafts. The results suggest that the steric crowding of polymer ligands in dense GNP systems may fundamentally alter the interactions between brush particles in solution and highlight the crucial role of architecture (internal microstructure) on the behavior of hybrid materials. The effect of grafting density also illustrates the opportunity to tailor the physical properties of hybrid materials by altering geometry (or architecture) rather than a variation of the chemical composition.

| S-EPMC8361431 | biostudies-literature

Structure and pH-Induced Swelling of Polymer Films Prepared from Sequentially Grafted Polyelectrolytes.

Project description:We have prepared a series of ampholytic polymer films, using a self-initiated photografting and photopolymerization (SI-PGP) method to sequentially polymerize first anionic (deuterated methacrylic acid (dMAA)) and thereafter cationic (2-aminoethyl methacrylate (AEMA)) monomers to investigate the SI-PGP grafting process. Dry films were investigated by ellipsometry, X-ray, and neutron reflectometry, and their swelling was followed over a pH range from 4.5 to 10.5 with spectroscopic ellipsometry. The deuterated monomer allows us to separate the distributions of the two components by neutron reflectometry. Growth of both polymers proceeds via grafting of solution-polymerized fragments to the surface, and also the second layer is primarily grafted to the substrate and not as a continuation of the existing chains. The polymer films are stratified, with one layer of near 1:1 composition and the other layer enriched in one component and located either above or below the former layer. The ellipsometry results show swelling transitions at low and high pH but with no systematic variation in the pH values where these transitions occur. The results suggest that grafting density in SI-PGP-prepared homopolymers could be increased via repeated polymerization steps, but that this process does not necessarily increase the average chain length.

| S-EPMC8830213 | biostudies-literature

Thermoresponsive Nanoparticles with Cyclic-Polymer-Grafted Shells Are More Stable than with Linear-Polymer-Grafted Shells: Effect of Polymer Topology, Molecular Weight, and Core Size.

Project description:Polymer brush-grafted superparamagnetic iron oxide nanoparticles can change their aggregation state in response to temperature and are potential smart materials for many applications. Recently, the shell morphology imposed by grafting to a nanoparticle core was shown to strongly influence the thermoresponsiveness through a coupling of intrashell solubility transitions and nanoparticle aggregation. We investigate how a change from linear to cyclic polymer topology affects the thermoresponsiveness of poly(2-isopropyl-2-oxazoline) brush-grafted superparamagnetic iron oxide nanoparticles. Linear and cyclic polymers with three different molecular weights (7, 18, and 24.5 kg mol-1) on two different core sizes (3.7 and 9.2 nm) and as free polymer were investigated. We observed the critical flocculation temperature (CFT) during temperature cycling dynamic light scattering experiments, the critical solution temperature (CST), and the transition enthalpy per monomer during differential scanning calorimetry measurements. When all conditions are identical, cyclic polymers increase the colloidal stability and the critical flocculation temperature compared to their linear counterparts. Furthermore, the cyclic polymer shows only one uniform transition, while we observe multiple transitions for the linear polymer shells. We link the single transition and higher colloidal stability to the absence in cyclic PiPrOx shells of a dilute outer part where the particle shells can interdigitate.

| S-EPMC8279546 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data