Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth Mechanism of SmB6 Nanowires Synthesized by Chemical Vapor Deposition: Catalyst-Assisted and Catalyst-Free.

ABSTRACT: SmB6 nanowires, as a prototype of nanostructured topological Kondo insulator, have shown rich novel physical phenomena relating to their surface. Catalyst-assisted chemical vapor deposition (CVD) is a common approach to prepare SmB6 nanowires and Ni is the most popular catalyst used to initiate the growth of SmB6 nanowires. Here, we study the effect of growth mechanism on the surface of SmB6 nanowires synthesized by CVD. Two types of SmB6 nanowires are obtained when using Ni as the catalyst. In addition to pure SmB6 nanowires without Ni impurity, a small amount of Ni is detected on the surface of some SmB6 nanowires by element analysis with transmission electron microscopy. In order to eliminate the possible distribution of Ni on nanowire surface, we synthesize single crystalline SmB6 nanowires by CVD without using catalyst. The difference between catalyst-assisted and catalyst-free growth mechanism is discussed.

SUBMITTER: Chu Y

PROVIDER: S-EPMC6722856 | biostudies-other | 2019 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Growth Mechanism of SmB6 Nanowires Synthesized by Chemical Vapor Deposition: Catalyst-Assisted and Catalyst-Free.

Chu Yi Y Cui Yugui Y Huang Shaoyun S Xing Yingjie Y Xu Hongqi H

Nanomaterials (Basel, Switzerland) 20190724 8

SmB6 nanowires, as a prototype of nanostructured topological Kondo insulator, have shown rich novel physical phenomena relating to their surface. Catalyst-assisted chemical vapor deposition (CVD) is a common approach to prepare SmB6 nanowires and Ni is the most popular catalyst used to initiate the growth of SmB6 nanowires. Here, we study the effect of growth mechanism on the surface of SmB6 nanowires synthesized by CVD. Two types of SmB6 na ...[more]

PMID: 31344896

Similar Datasets

Precisely aligned graphene grown on hexagonal boron nitride by catalyst free chemical vapor deposition.

Project description:To grow precisely aligned graphene on h-BN without metal catalyst is extremely important, which allows for intriguing physical properties and devices of graphene/h-BN hetero-structure to be studied in a controllable manner. In this report, such hetero-structures were fabricated and investigated by atomic resolution scanning probe microscopy. Moiré patterns are observed and the sensitivity of moiré interferometry proves that the graphene grains can align precisely with the underlying h-BN lattice within an error of less than 0.05°. The occurrence of moiré pattern clearly indicates that the graphene locks into h-BN via van der Waals epitaxy with its interfacial stress greatly released. It is worthy to note that the edges of the graphene grains are primarily oriented along the armchair direction. The field effect mobility in such graphene flakes exceeds 20,000 cm(2)·V(-1)·s(-1) at ambient condition. This work opens the door of atomic engineering of graphene on h-BN, and sheds light on fundamental research as well as electronic applications based on graphene/h-BN hetero-structure.

| S-EPMC3773621 | biostudies-literature

Diamond formation mechanism in chemical vapor deposition.

Project description:It is a key challenge to prepare large-area diamonds by using the methods of high-pressure high-temperature and normal chemical vapor deposition (CVD). The formation mechanism of thermodynamically metastable diamond compared to graphite in low-pressure CVD possibly implies a distinctive way to synthesize large-area diamonds, while it is an intriguing problem due to the limitation of in situ characterization in this complex growth environment. Here, we design a series of short-term growth on the margins of cauliflower-like nanocrystalline diamond particles, allowing us to clearly observe the diamond formation process. The results show that vertical graphene sheets and nanocrystalline diamonds alternatively appear, in which vertical graphene sheets evolve into long ribbons and graphite needles, and they finally transform into diamonds. A transition process from graphite (200) to diamond (110) verifies the transformation, and Ta atoms from hot filaments are found to atomically disperse in the films. First principle calculations confirm that Ta-added H- or O-terminated bilayer graphene spontaneously transforms into diamond. This reveals that in the H, O, and Ta complex atmosphere of the CVD environment, diamond is formed by phase transformation from graphite. This subverts the general knowledge that graphite is etched by hydrogen and sp3 carbon species pile up to form diamond and supplies a way to prepare large-area diamonds based on large-sized graphite under normal pressure. This also provides an angle to understand the growth mechanism of materials with sp2 and sp3 electronic configurations.

| S-EPMC9169815 | biostudies-literature

Direct Synthesis of Oxynitride Nanowires through Atmospheric Pressure Chemical Vapor Deposition.

Project description:Binary and ternary oxynitride solid alloys were studied extensively in the past decade due to their wide spectrum of applications, as well as their peculiar characteristics when compared to their bulk counterparts. Direct bottom-up synthesis of one-dimensional oxynitrides through solution-based routes cannot be realized because nitridation strategies are limited to high-temperature solid-state ammonolysis. Further, the facile fabrication of oxynitride thin films through vapor phase strategies has remained extremely challenging due to the low vapor pressure of gaseous building blocks at atmospheric pressure. Here, we present a direct and scalable catalytic vapor-liquid-solid epitaxy (VLSE) route for the fabrication of oxynitride solid solution nanowires from their oxide precursors through enhancing the local mass transfer flux of vapor deposition. For the model oxynitride material, we investigated the fabrication of gallium nitride and zinc oxide oxynitride solid solution (GaN:ZnO) thin film. GaN:ZnO nanowires were synthesized directly at atmospheric pressure, unlike the methods reported in the literature, which involved multiple-step processing and/or vacuum operating conditions. Moreover, the dimensions (i.e., diameters and length) of the synthesized nanowires were tailored within a wide range.

| S-EPMC7764907 | biostudies-literature

Low Temperature Metal Free Growth of Graphene on Insulating Substrates by Plasma Assisted Chemical Vapor Deposition.

Project description:Direct growth of graphene films on dielectric substrates (quartz and silica) is reported, by means of remote electron cyclotron resonance plasma assisted chemical vapor deposition r-(ECR-CVD) at low temperature (650°C). Using a two step deposition process- nucleation and growth- by changing the partial pressure of the gas precursors at constant temperature, mostly monolayer continuous films, with grain sizes up to 500 nm are grown, exhibiting transmittance larger than 92% and sheet resistance as low as 900 ?·sq-1. The grain size and nucleation density of the resulting graphene sheets can be controlled varying the deposition time and pressure. In additon, first-principles DFT-based calculations have been carried out in order to rationalize the oxygen reduction in the quartz surface experimentally observed. This method is easily scalable and avoids damaging and expensive transfer steps of graphene films, improving compatibility with current fabrication technologies.

| S-EPMC5214927 | biostudies-literature

Ultralight boron nitride aerogels via template-assisted chemical vapor deposition.

Project description:Boron nitride (BN) aerogels are porous materials with a continuous three-dimensional network structure. They are attracting increasing attention for a wide range of applications. Here, we report the template-assisted synthesis of BN aerogels by catalyst-free, low-pressure chemical vapor deposition on graphene-carbon nanotube composite aerogels using borazine as the B and N sources with a relatively low temperature of 900?(°)C. The three-dimensional structure of the BN aerogels was achieved through the structural design of carbon aerogel templates. The BN aerogels have an ultrahigh specific surface area, ultralow density, excellent oil absorbing ability, and high temperature oxidation resistance. The specific surface area of BN aerogels can reach up to 1051?m(2) g(-1), 2-3 times larger than the reported BN aerogels. The mass density can be as low as 0.6?mg cm(-3), much lower than that of air. The BN aerogels exhibit high hydrophobic properties and can absorb up to 160 times their weight in oil. This is much higher than porous BN nanosheets reported previously. The BN aerogels can be restored for reuse after oil absorption simply by burning them in air. This is because of their high temperature oxidation resistance and suggests broad utility as water treatment tools.

| S-EPMC4432566 | biostudies-literature

Chemical vapor deposition of germanium-rich CrGe x nanowires.

Project description:Chemical vapor deposition was applied to synthetize nanostructured deposits containing several sorts of nanoobjects (i.e., nanoballs, irregular particles, and nanowires). Analytical techniques, that is, high-resolution transmission electron microscopy, scanning electron microscopy, electron dispersive X-ray analysis, selected area electron diffraction, and X-ray photoelectron spectroscopy, showed that unlike nanoballs and particles composed of crystalline germanium, the layer was made of chromium germanide CrGe x . The nanowires possessed a complex structure, namely a thin crystalline germanium core and amorphous CrGe x coating. The composition of the nanowire coating was [Cr]/[Ge] = 1:(6-7). The resistance of the nanowire-deposit system was estimated to be 2.7 kΩ·cm using an unique vacuum contacting system.

| S-EPMC8685558 | biostudies-literature

Contamination-free graphene by chemical vapor deposition in quartz furnaces.

Project description:Although the growth of graphene by chemical vapor deposition is a production technique that guarantees high crystallinity and superior electronic properties on large areas, it is still a challenge for manufacturers to efficiently scale up the production to the industrial scale. In this context, issues related to the purity and reproducibility of the graphene batches exist and need to be tackled. When graphene is grown in quartz furnaces, in particular, it is common to end up with samples contaminated by heterogeneous particles, which alter the growth mechanism and affect graphene's properties. In this paper, we fully unveil the source of such contaminations and explain how they create during the growth process. We further propose a modification of the widely used quartz furnace configuration to fully suppress the sample contamination and obtain identical and clean graphene batches on large areas.

| S-EPMC5577164 | biostudies-other

Catalytic Growth of Gallium Nitride Nanowires on Wet Chemically Etched Substrates by Chemical Vapor Deposition.

Project description:Growth of gallium nitride nanowires on etched sapphire and GaN substrates using binary catalytic alloy were investigated by manipulating the growth time and precursor-to-substrate distance. The variations in behavior at different growth conditions were observed using X-ray diffractometer, Raman spectroscopy, X-ray photoelectron spectroscopy, cathodoluminescence spectroscopy, optical microscopy, atomic force microscopy, and scanning electron microscopy. It was noticed that, in respect of both the substrates, when growth time and/or precursor-to-substrate distance is increased, thickness of the nanowires around the etch pits remains unaltered, but there is variation in the density of nanowires. In addition, formation of gallium nitride microwires within the etch pits was also observed on etched sapphire substrates. Similarly, the thickness and density of the microwires were found to increase with increase in growth time and decrease with increase in precursor-to-substrate distance. The dimensionality scaling of gallium nitride was found to have a positive effect in improving the luminescence property and band gap of the grown nanowires. This method of nanowire growth can be helpful in increasing the probability of multiple reflections in the materials which makes them a suitable candidate for optoelectronic devices.

| S-EPMC6751544 | biostudies-literature

Formation Mechanisms of InGaAs Nanowires Produced by a Solid-Source Two-Step Chemical Vapor Deposition.

Project description:The morphologies and microstructures of Au-catalyzed InGaAs nanowires (NWs) prepared by a two-step solid-source chemical vapor deposition (CVD) method were systematically investigated using scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). The detailed structural characterization and statistical analysis reveal that two specific morphologies are dominant in InGaAs NWs, a zigzag surface morphology and a smooth surface morphology. The zigzag morphology results from the periodic existence of twining structures, and the smooth morphology results from a lack of twining structures. HRTEM images and energy-dispersive X-ray spectroscopy (EDX) indicate that the catalyst heads have two structures, Au4In and AuIn2, which produce InGaAs NWs in a cubic phase crystalline form. The growth mechanism of the InGaAs NWs begins with Au nanoparticles melting into small spheres. In atoms are diffused into the Au spheres to form an Au-In alloy. When the concentration of In inside the alloy reaches its saturation point, the In precipitate reacts with Ga and As atoms to form InGaAs at the interface between the catalyst and substrate. Once the InGaAs compound forms, additional precipitation and reactions only occur at the interface of the InGaAs and the catalyst. These results provide a fundamental understanding of the InGaAs NW growth process which is critical to the formation of high-quality InGaAs NWs for various device applications.

| S-EPMC6119172 | biostudies-literature

Direct Growth of Graphene on Silicon by Metal-Free Chemical Vapor Deposition.

Project description:The metal-free synthesis of graphene on single-crystal silicon substrates, the most common commercial semiconductor, is of paramount significance for many technological applications. In this work, we report the growth of graphene directly on an upside-down placed, single-crystal silicon substrate using metal-free, ambient-pressure chemical vapor deposition. By controlling the growth temperature, in-plane propagation, edge-propagation, and core-propagation, the process of graphene growth on silicon can be identified. This process produces atomically flat monolayer or bilayer graphene domains, concave bilayer graphene domains, and bulging few-layer graphene domains. This work would be a significant step toward the synthesis of large-area and layer-controlled, high-quality graphene on single-crystal silicon substrates.

| S-EPMC6199066 | biostudies-literature