Dataset Information

Wastewater Biofilm Photosynthesis in Photobioreactors.

ABSTRACT: Photosynthetic performance of algal-bacterial biofilms from an Italian wastewater treatment plant was studied in a flow-lane photobioreactor at different irradiances, temperatures, and flow regime to evaluate the effects of these environmental parameters on biofilms' functioning, in view of application of these communities in wastewater biological treatment. Pulse amplitude modulated fluorescence was used to estimate the effective quantum yield of PSII (ΔF/Fm') of the light-acclimated biofilms and to perform rapid light curves (RLCs) for the determination of the photosynthetic parameters (rel.ETRmax, α, Ik). Chl a, ash free dry weight (AFDW), and dry weight (DW) were measured to assess phototrophic and whole biofilm biomass development over time. From the analysis of photosynthetic parameter variation with light intensity, temperature and flow rate, it was possible to identify the set of experimental values favoring biofilm photosynthetic activity. Biomass increased over time, especially at the highest irradiances, where substrata were fastly colonized and mature biofilms developed at all temperatures and flow conditions tested.

SUBMITTER: Guzzon A

PROVIDER: S-EPMC6723877 | biostudies-other | 2019 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Wastewater Biofilm Photosynthesis in Photobioreactors.

Guzzon Antonella A Di Pippo Francesca F Congestri Roberta R

Microorganisms 20190810 8

Photosynthetic performance of algal-bacterial biofilms from an Italian wastewater treatment plant was studied in a flow-lane photobioreactor at different irradiances, temperatures, and flow regime to evaluate the effects of these environmental parameters on biofilms' functioning, in view of application of these communities in wastewater biological treatment. Pulse amplitude modulated fluorescence was used to estimate the effective quantum yield of PSII (ΔF/F<sub>m</sub>') of the light-acclimated ...[more]

PMID: 31405172

Similar Datasets

Project description:This study investigated the potential of Membrane-Aerated Biofilm Reactors (MABRs) for mainstream nitrogen removal via partial nitration/anaerobic ammonium oxidation (anammox). Four laboratory-scale MABRs were operated with real municipal wastewater characterized by low concentrations of nitrogen (varying between 31 and 120 mg-NH4-N L-1) and the presence of biodegradable organic carbon (soluble COD (sCOD) between 7 and 230 mg-O2 L-1). Two reactors were operated with different aeration strategies (intermittent vs. continuous), the other two with differences in biomass retention (recirculation or removal of detached biomass). Keeping a constant HRT caused instabilities due to difficulties with setting the optimal oxygen flux for the respective surface loadings (1.6-6 g-NH4-N m-2 d-1). Operating the MABRs with a constant surface loading (2 g-NH4-N m-2 d-1) resulted in higher and more stable total nitrogen (TN) removal independent of the aeration strategy. The intermittently aerated MABR improved from an average TN removal of 23%-69%, the continuously aerated MABR from 20% to 50% TN removal. Independent of the feeding strategy, the continuously aerated reactor removed slightly more ammonium (80-95%) compared to the intermittently aerated reactor (74-93%). Limiting the oxygen supply by intermittent aeration proofed successful to favor partial nitritation and anammox. Continuous aeration did not achieve stable suppression of nitrite oxidizing bacteria (NOB). Of the removed ammonium, approx. 26% were left in the effluent as nitrate (only 10% with intermittent aeration). Recirculation of the detached biomass resulted in reattachment onto the biofilm or membrane surface. This recirculation led to significantly higher biomass retention times and thus to better performance. Removing detached biofilm from the reactor caused a slightly lower TN removal of 33% compared to 45% with reattachment, while average ammonium removal was 58% compared to 63%, respectively. Scouring events had a significant impact on the overall operation, resulting in short term losses of TN removal capacities of 50-100%. The microbial community composition was different depending on the aeration strategy and biomass retention. The continuously aerated reactor contained significantly more AOB than the intermittently aerated MABR. The reactor with biomass retention contained less ammonium oxidizing bacteria (AOB), compared to the reactor with low biomass retention. In all MABRs, anammox bacteria established in the biofilm after an initial drop in abundance.

Project description:Moving Bed Biofilm Reactors (MBBRs) can efficiently treat wastewater by incorporating suspended biocarriers that provide attachment surfaces for active microorganisms. The performance of MBBRs for wastewater treatment is, among other factors, contingent upon the characteristics of the surface area of the biocarriers. Thus, novel biocarrier topology designs can potentially increase MBBR performance in a significant manner. The goal of this work is to assess the performance of 3-D-printed biofilter media biocarriers with varying surface area designs for use in nitrifying MBBRs for wastewater treatment. Mathematical models, rendering, and 3D printing were used to design and fabricate gyroid-shaped biocarriers with a high degree of complexity at three different levels of specific surface area (SSA), generally providing greater specific surface areas than currently available commercial designs. The biocarriers were inoculated with a nitrifying bacteria community, and tested in a series of batch reactors for ammonia conversion to nitrate, in three different experimental configurations: constant fill ratio, constant total surface area, and constant biocarrier media count. Results showed that large and medium SSA gyroid biocarriers delivered the best ammonia conversion performance of all designs, and significantly better than that of a standard commercial design. The percentage of ammonia nitrogen conversion at 8 hours for the best performing biocarrier design was: 99.33% (large SSA gyroid, constant fill ratio), 94.74% (medium SSA gyroid, constant total surface area), and 92.73% (large SSA gyroid, constant biocarrier media count). Additionally, it is shown that the ammonia conversion performance was correlated to the specific surface area of the biocarrier, with the greatest rates of ammonia conversion (99.33%) and nitrate production (2.7 mg/L) for manufactured gyroid biocarriers with a specific surface area greater than 1980.5 m2/m3. The results suggest that the performance of commercial MBBRs for wastewater treatment can be greatly improved by manipulation of media design through topology optimization.

Dataset Information

Wastewater Biofilm Photosynthesis in Photobioreactors.

Publications

Wastewater Biofilm Photosynthesis in Photobioreactors.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets