Dataset Information

Waste-activated sludge disruption by dry ice: bench scale study and evaluation of heat phase transformations.

ABSTRACT: The freezing process consists of dissipating heat from the product until the final temperature is lower than the temperature of crystallisation of that product. Freezing can be used for numerous applications, including for disruption of waste-activated sludge (WAS). The aim of this study was to calculate the estimated amount of heat conveyed between the solidified carbon dioxide and the WAS, in the following ratios: 0.25:1; 0.5:1; 0.75:1 and 1:1. In heat of phase transformations, dry ice sublimation, water solidification, the amount of heat transferred by other substances and heat transferred from the sludge (dry sludge) were taken into account during the process of WAS freezing. Heat changes on the surface of WAS were registered using a thermovision camera. The effectiveness of WAS disintegration was confirmed by several biochemical parameters such as soluble chemical oxygen demand (increase over 14 times), degree of disintegration (48%), proteins (increase over 5 times), carbohydrates (increase almost 7 times), RNA (increase by 2.23 mg L-1), ammonia nitrogen (increase over 23 times), phosphates (increase almost 27 times) and turbidity (increased over 7 times). It was found that dry ice pretreatment of WAS can be an intriguing alternative for the conventional methods used.

SUBMITTER: Machnicka A

PROVIDER: S-EPMC6733821 | biostudies-other | 2019 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Waste-activated sludge disruption by dry ice: bench scale study and evaluation of heat phase transformations.

Machnicka Alicja A Grübel Klaudiusz K Wacławek Stanisław S Sikora Krzysztof K

Environmental science and pollution research international 20190709 26

The freezing process consists of dissipating heat from the product until the final temperature is lower than the temperature of crystallisation of that product. Freezing can be used for numerous applications, including for disruption of waste-activated sludge (WAS). The aim of this study was to calculate the estimated amount of heat conveyed between the solidified carbon dioxide and the WAS, in the following ratios: 0.25:1; 0.5:1; 0.75:1 and 1:1. In heat of phase transformations, dry ice sublima ...[more]

PMID: 31290045

Similar Datasets

Project description:BackgroundMost of the organic content of waste activated sludge (WAS) comprises microbial cells hard to degrade, which must be pre-treated for energy recovery by anaerobic digestion (AD). Electrooxidation pre-treatment (EOP) with boron-doped diamond (BDD) electrode have been considered a promising novel technology that increase hydrolysis rate, by the disintegrating cell walls from WAS. Although electrochemical oxidation could efficiently solubilize organic substances of macromolecules, limited reports are available on EOP of WAS for improving AD. In this endeavour, the mathematical optimization study and the energy analysis of the effects of initial total solids concentrations [TS] of WAS and current density (CD) during EOP on the methane production and removal of chemical oxygen demand (COD) and volatile solids (VS) were investigated. Because limited reports are available on EOP of WAS for improving biogas production, it is not well understood; however, it has started to attract interest of scientists and engineers.ResultsIn the present work, the energy recovery as biogas and WAS conversion were comprehensively affected by CD and [TS], in an integrated EOP and AD system. When working with WAS at 3% of [TS] pre-treated at current density of 24.1 mA/cm2, the highest COD and VS removal were achieved, making it possible to obtain the maximum methane (CH4) production of 305 N-L/kg VS and a positive energy balance of 1.67 kWh/kg VS. Therefore, the current densities used in BDD electrode are adequate to produce the strong oxidant (hydroxyl radical, ·OH) on the electrode surface, allow the oxidation of organic compounds that favours the solubilization of particulate matter and VS from WAS.ConclusionsThe improvement of VS removal and COD solubilization were due to the effects of pre-treatments, which help to break down the microbial cells for faster subsequent degradation; this allows a decomposition reaction that leads to biodegrade more compounds during AD. The balance was positive, suggesting that even without any optimization the energy used as electricity could be recovered from the increased methane production. It is worth noting that this kind of analysis have not been sufficiently studied so far. It is therefore important to understand how operational parameters can influence the pre-treatment and AD performances. The current study highlights that the mathematical optimization and energy analysis can make the whole process more convenient and feasible.

Project description:BACKGROUND:Recently, it has been indicated that anaerobic co-digestion of waste activated sludge with other waste streams at wastewater treatment plants is a promising strategy for enhancing methane production and materials recovery. The enhanced methane production can be used as a renewable source of energy in wastewater treatment plants. It can also reduce the amount of greenhouse gas emission in landfilling of the waste streams. RESULTS:According to the results obtained in this study, anaerobic co-digestion of waste activated sludge with mixed fruit waste and cheese whey improves methane production and the quality of digested sludge in comparison to the anaerobic digestion of waste activated sludge individually. It was indicated that carbon/nitrogen ratio (C/N) in the mixture of waste activated sludge, fruit waste and cheese whey improved considerably, leading to better anaerobic organisms' activity during digestion. With assessing the activity of protease and cellulase, as the main enzymes hydrolyzing organic matter in anaerobic digestion, it was indicated that co-digestion of waste activated sludge with mixed fruit waste and cheese whey enhances the activity of these enzymes by 22 and 9% respectively. At the end of digestion, the amount of cumulative methane production significantly increased by 31% in the reactor with 85% waste activated sludge and 15% mixed fruit waste and cheese whey, compared to the reactor with 100% waste activated sludge. In addition, chemical oxygen demand (COD) and volatile solid (VS) in digested sludge was improved respectively by 9 and 7% when mixed fruit waste and cheese whey was used. CONCLUSIONS:This study revealed that mixed fruit waste and cheese whey is potentially applicable to anaerobic digestion of waste activated sludge, as fruit waste and cheese whey have high C/N ratio that enhance low C/N in waste activated sludge and provide a better diet for anaerobic organisms. This is of significant importance because not only could higher amount of renewable energy be generated from the enhanced methane production in wastewater treatment plants, but also capital costs of the companies whose waste streams are being transported to wastewater treatments plants could be reduced considerably.

Project description:Anaerobic co-digestion (Co-AD) is used to increase the effectiveness of anaerobic digestion (AD) using local "wastes", adding economic and environmental benefits. Since system stability is of existential importance for the operation of wastewater treatment plants, thorough testing of potential co-substrates and their effects on the respective community and system performance is crucial for understanding and utilizing Co-AD to its best capacity. Food waste (FW) and canola lecithin (CL) were tested in mesophilic, lab-scale, semi-continuous reactors over a duration of 120 days with stepwise increased substrate addition. Key performance indicators (biogas, total/volatile solids, fatty acids) were monitored and combined with 16S-rRNA amplicon sequencing to assess the impact of co-substrate addition on reactor performance and microbial community composition (MCC). Additionally, the latter was then compared with natural shifts occurring in the wastewater treatment plant (WWTP, source) at the same time. An almost linear increase in biogas production with both co-substrates at an approximate 1:1 ratio with the organic loading rate (OLR) was observed. The MCCs in both experiments were mostly stable, but also prone to drift over time. The FW experiment MCC more closely resembled the original WWTP community and the observed shifts indicated high levels of functional redundancy. Exclusive to the CL co-substrate, a clear selection for a few operational taxonomic units (OTUs) was observed. There was little evidence for a persistent invasion and establishment of microorganisms from typical primary substrates into the stable resident community of the reactors, which is in line with earlier findings that suggested that the inoculum and history mostly define the MCC. However, external factors may still tip the scales in favor of a few r-strategists (e.g., Prolixibacter) in an environment that otherwise favors K-strategists, which may in fact also be recruited from the primary substrate (Trichococcus). In our study, specialization and diversity loss were also observed in response to the addition of the highly specialized CL, which in turn, may have adverse effects on the system's stability and reduced resilience and recovery.

Project description:BackgroundWaste activated sludge (WAS) has recently gained attention as a feedstock for resource recovery. The aim of this study is to investigate the corrosion inhibition efficiencies of extracellular polymeric substances (EPS) extracted from WAS.MethodsThe studied corrosion inhibitors were tested with carbon steel in 3.64% NaCl saturated with CO2 at 25 °C, which is the typical oilfield environment. They were first prepared by EPS extraction (heating at 80 °C), followed by centrifugation for solid and liquid separation, then the supernatant was freeze-thawed five times for sterilization of microorganisms in WAS to terminate metabolic activities in the test inhibitors to ensure consistency in corrosion inhibition. The EPS mixture (supernatant) was then deemed as the test corrosion inhibitor. The inhibition performance was determined using potentiodynamic polarization scans.ResultsWaste activated sludge alone showed unsatisfactory inhibition. However, EPS extracted from WAS showed an optimum inhibition of approximately 80% with 1,000 mg/L of inhibitor. The average total solid (TS) and EPS contents of the WAS were 7,330 mg TS/L WAS and 110 mg EPS/g TS, respectively. Three sets of extracted EPS were scanned with fourier-transform infrared spectroscopy (FTIR) and showed almost overlapping curves, yielding the consistent inhibition performance.DiscussionThe potentiodynamic polarization results indicated that EPS acts as a mixed-type inhibitor which inhibits corrosion on both anode and cathode sites of metal surfaces. Based on the FTIR results, it was assumed that major chemical groups O-H, N-H, C-N, C=O, and C-H contributed to the inhibition by adsorbing on the metal surface, forming a biofilm that acts as a protective barrier to isolate the metal from its corrosive environment. Results show that WAS EPS corrosion inhibitors have inhibition performance comparable to commercial products, signifying their potential in commercialization. This corrosion inhibitor is renewable, biodegradable, non-toxic, and free from heavy metal, making it a superior green corrosion inhibitor candidate. Additionally, turning biomass into value-added product can be beneficial to the environment and, in this case, deriving new materials from WAS could also transform the economics of wastewater treatment operations.

Dataset Information

Waste-activated sludge disruption by dry ice: bench scale study and evaluation of heat phase transformations.

Publications

Waste-activated sludge disruption by dry ice: bench scale study and evaluation of heat phase transformations.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure